Rilsan® TIEFLEX S452 BLACK T6L

Alternative und Handelsbezeichungen
PA*

Want to keep this datasheet? Save it now in your required format

Description

Rilsan® TIEFLEX S452 BLACK T6L resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for multilayer automotive and trucks fuel lines (tie layer for fuel line). In the case of direct contact with fuel, contact Arkema representative for recommendations.

Packaging:

This grade is delivered dried in sealed packaging (25kg bags) ready to be processed.

Shelf life:

Two years from the date of delivery. For any use above this limit, please refer to our technical services.

Diese Materialdaten wurden von Arkema Technical Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Condition	Testing Standard
Dichte	1.09 g/cm³ Show Supplier Material materials with Dichte of 1.09 g/cm³	dry	ISO 1183
Moisture absorption	1.2 % Show Supplier Material materials with Moisture absorption of 1.2 %		Sim. to ISO 62
Wasserabsorption	2.9 % Show Supplier Material materials with Wasserabsorption of 2.9 %		Sim. to ISO 62

Mechanisch

Property	Temperature	Value	Condition	Testing Standard	Comment
Dehnung		50 % Show Supplier Material materials with Dehnung of 50 %	cond.	ISO 527-1/-2	min. \| nominal
Elastizitätsmodul		0.515 GPa Show Supplier Material materials with Elastizitätsmodul of 0.515 GPa	cond.	ISO 527-1/-2
		0.685 GPa Show Supplier Material materials with Elastizitätsmodul of 0.685 GPa	dry	ISO 527-1/-2
Elongation at yield		31 % Show Supplier Material materials with Elongation at yield of 31 %	cond.	ISO 527-1/-2
Schlagfestigkeit, Charpy gekerbt	-30 °C	6.5 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 6.5 kJ/m²	cond.	ISO 179/1eA
	23 °C	95 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 95 kJ/m²	cond.	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt		No Break at 23 and -30°C	cond.	ISO 179/1eU
Streckgrenze		33 MPa Show Supplier Material materials with Streckgrenze of 33 MPa	cond.	ISO 527-1/-2

Thermisch

Property	Value	Condition	Testing Standard	Comment
Schmelzpunkt	217 °C Show Supplier Material materials with Schmelzpunkt of 217 °C	dry	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Schmelzvolumenflussrate	3.4 cm³/10min Show Supplier Material materials with Schmelzvolumenflussrate of 3.4 cm³/10min	dry	ISO 1133	235°C/5kg

Technological properties

Property

Processing methods

Extrusion:

Typical melt temperature (min / recommended / max): 220°C / 230°C / 270°C

Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 80°C

Rilsan® TIEFLEX S452 BLACK T6L

Description

Ashby charts

Materialien von diesem Anbieter

Eigenschaften