Thermodur 2714 Plate

Alternative und Handelsbezeichungen
DIN EN ISO 55NiCrMoV7, 1.2714, AISI L6, AFNOR 55NCDV7
Want to keep this datasheet? Save it now in your required format

Description

1.2714 (55NiCrMoV7) is a tough die steel with high tempering resistance and good through-hardening properties. This grade is usually supplied in annealed condition or quenched and tempered to a working hardness of 370 to 410 HB (round) or 355 to 400 HB (square, flat).

Equivalent Materials

Diese Materialdaten wurden von Deutsche Edelstahlwerke Specialty Steel (DEW) zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

Eigenschaften

Abmessung

PropertyValue

Breite

350 - 1010 mm

Show Supplier Material materials with Breite of 350 - 1010 mm

Dicke

20 - 600 mm

Show Supplier Material materials with Dicke of 20 - 600 mm

Mechanisch

PropertyValueComment

Härte, Brinell

355 - 410 [-]

Show Supplier Material materials with Härte, Brinell of 355 - 410 [-]

as-delivered condition

Härte, Rockwell C

56 - 58 [-]

Show Supplier Material materials with Härte, Rockwell C of 56 - 58 [-]

after quenching

Zugfestigkeit

1190 - 1385 MPa

Show Supplier Material materials with Zugfestigkeit of 1190 - 1385 MPa

Thermisch

PropertyTemperatureValueComment

Koeffizient der thermischen Ausdehnung

100 °C

1.22e-05 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.22e-05 1/K

for 20°C to the mentioned temperature

200 °C

1.3e-05 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.3e-05 1/K

for 20°C to the mentioned temperature

300 °C

1.33e-05 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.33e-05 1/K

for 20°C to the mentioned temperature

400 °C

1.37e-05 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.37e-05 1/K

for 20°C to the mentioned temperature

500 °C

1.42e-05 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.42e-05 1/K

for 20°C to the mentioned temperature

600 °C

1.44e-05 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.44e-05 1/K

for 20°C to the mentioned temperature

Wärmeleitfähigkeit

23 °C

36 W/(m·K)

Show Supplier Material materials with Wärmeleitfähigkeit of 36 W/(m·K)

350 °C

38.8 W/(m·K)

Show Supplier Material materials with Wärmeleitfähigkeit of 38.8 W/(m·K)

700 °C

35 W/(m·K)

Show Supplier Material materials with Wärmeleitfähigkeit of 35 W/(m·K)

Chemical properties

PropertyValue

Chrom

1.1 %

Show Supplier Material materials with Chrom of 1.1 %

Eisen

Balance

Kohlenstoff

0.56 %

Show Supplier Material materials with Kohlenstoff of 0.56 %

Mangan

0.75 %

Show Supplier Material materials with Mangan of 0.75 %

Nickel

1.7 %

Show Supplier Material materials with Nickel of 1.7 %

Silizium

0.25 %

Show Supplier Material materials with Silizium of 0.25 %

Vanadium

0.1 %

Show Supplier Material materials with Vanadium of 0.1 %

Technological properties

Property
Application areas

Standard steel for forging dies, press dies, auxiliary tools for extrusion, die holders, armoured trim dies, hot shear blades

Heat Treatment

Soft annealing: 650-700°C (Cooling in furnace) - Hardening: 830-870°C, 860-900 (Oil, Air)