Printdur® Ni625 LFe

Alternative und Handelsbezeichungen
2.4856, Alloy 625
Want to keep this datasheet? Save it now in your required format

Description

2.4856 (Alloy 625) used for applications that require outstanding corrosion resistance, the use of our nickel-based metal powders is recommended. With Printdur® Ni625LFe (~2.4856) we are expanding our portfolio of corrosion resistant materials for 3D printing.


Printdur® Ni625LFe has good resistance to mineral acids such as nitric, phosphoric, sulfuric or hydrochloric acid. In addition, it is also corrosion resistant to alkalis and organic acids. Furthermore, the material has a good resistance to hot gas corrosion in the solution heat treated condition and a high creep rupture strength above 600°C.


In comparison to Printdur® Ni625, the iron content of Printdur® Ni625 LFe is significantly lower. This leads to a cleaner material with even better corrosion and oxidation properties.

Equivalent Materials

Diese Materialdaten wurden von Deutsche Edelstahlwerke Specialty Steel (DEW) zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

Eigenschaften

Allgemein

PropertyValue

Partikelgrößenbereich

20 - 53 µm

Show Supplier Material materials with Partikelgrößenbereich of 20 - 53 µm

Schüttdichte

3.8 - 4.6 g/cm³

Show Supplier Material materials with Schüttdichte of 3.8 - 4.6 g/cm³

Mechanisch

PropertyValueComment

Charpy impact energy, V-notch

100 J

Show Supplier Material materials with Charpy impact energy, V-notch of 100 J

Dehnung

35 %

Show Supplier Material materials with Dehnung of 35 %

A5

Streckgrenze

660 - 760 MPa

Show Supplier Material materials with Streckgrenze of 660 - 760 MPa

RP02

Zugfestigkeit

920 - 1030 MPa

Show Supplier Material materials with Zugfestigkeit of 920 - 1030 MPa

Magnetisch

PropertyValueComment

Relative magnetische Permeabilität

1 [-]

Show Supplier Material materials with Relative magnetische Permeabilität of 1 [-]

max. | None magnetic

Rheological Properties

PropertyValue

Halldurchfluss

12 - 20 s/50g

Show Supplier Material materials with Halldurchfluss of 12 - 20 s/50g

Chemical properties

PropertyValue

Chrom

22 %

Show Supplier Material materials with Chrom of 22 %

Eisen

0.5 %

Show Supplier Material materials with Eisen of 0.5 %

Kobalt

0.5 %

Show Supplier Material materials with Kobalt of 0.5 %

Kohlenstoff

0.03 %

Show Supplier Material materials with Kohlenstoff of 0.03 %

Mangan

0.5 %

Show Supplier Material materials with Mangan of 0.5 %

Molybdän

9 %

Show Supplier Material materials with Molybdän of 9 %

Nickel

Balance

Niobium

3.5 %

Show Supplier Material materials with Niobium of 3.5 %

Silizium

0.5 %

Show Supplier Material materials with Silizium of 0.5 %

Technological properties

Property
Application areas

Additive manufacturing

Processing history

The powder is produced by gas atomization.

Processing methods

Printdur® Ni625LFe can be processed on LPBF systems. The process parameters are similar to those of alloy 625. Please contact us for further information.