Eigenschaften
Allgemein
| Property | Value |
|---|---|
Dichte | 8.1 g/cm³ Show Supplier Material materials with Dichte of 8.1 g/cm³ |
Abmessung
| Property | Value | Comment |
|---|---|---|
Durchmesser | 250 mm Show Supplier Material materials with Durchmesser of 250 mm | max. |
Mechanisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Charpy impact energy, V-notch | 100 J Show Supplier Material materials with Charpy impact energy, V-notch of 100 J | ||
Dehnung | 35 % Show Supplier Material materials with Dehnung of 35 % | A5 | Transverse | |
40 % Show Supplier Material materials with Dehnung of 40 % | A5 | ||
Elastizitätsmodul | 20 °C | 195 GPa Show Supplier Material materials with Elastizitätsmodul of 195 GPa | |
100 °C | 190 GPa Show Supplier Material materials with Elastizitätsmodul of 190 GPa | ||
200 °C | 182 GPa Show Supplier Material materials with Elastizitätsmodul of 182 GPa | ||
300 °C | 174 GPa Show Supplier Material materials with Elastizitätsmodul of 174 GPa | ||
400 °C | 166 GPa Show Supplier Material materials with Elastizitätsmodul of 166 GPa | ||
500 °C | 158 GPa Show Supplier Material materials with Elastizitätsmodul of 158 GPa | ||
Härte, Brinell | 250 [-] Show Supplier Material materials with Härte, Brinell of 250 [-] | ||
Streckgrenze | 20 °C | 300 MPa Show Supplier Material materials with Streckgrenze of 300 MPa | RP02 |
20 °C | 340 MPa Show Supplier Material materials with Streckgrenze of 340 MPa | RP1 | |
100 °C | 230 MPa Show Supplier Material materials with Streckgrenze of 230 MPa | RP02 | |
100 °C | 270 MPa Show Supplier Material materials with Streckgrenze of 270 MPa | RP1 | |
150 °C | 210 MPa Show Supplier Material materials with Streckgrenze of 210 MPa | RP02 | |
150 °C | 245 MPa Show Supplier Material materials with Streckgrenze of 245 MPa | RP1 | |
200 °C | 190 MPa Show Supplier Material materials with Streckgrenze of 190 MPa | RP02 | |
200 °C | 225 MPa Show Supplier Material materials with Streckgrenze of 225 MPa | RP1 | |
250 °C | 180 MPa Show Supplier Material materials with Streckgrenze of 180 MPa | RP02 | |
250 °C | 215 MPa Show Supplier Material materials with Streckgrenze of 215 MPa | RP1 | |
300 °C | 170 MPa Show Supplier Material materials with Streckgrenze of 170 MPa | RP02 | |
300 °C | 205 MPa Show Supplier Material materials with Streckgrenze of 205 MPa | RP1 | |
350 °C | 165 MPa Show Supplier Material materials with Streckgrenze of 165 MPa | RP02 | |
350 °C | 195 MPa Show Supplier Material materials with Streckgrenze of 195 MPa | RP1 | |
400 °C | 160 MPa Show Supplier Material materials with Streckgrenze of 160 MPa | RP02 | |
400 °C | 190 MPa Show Supplier Material materials with Streckgrenze of 190 MPa | RP1 | |
Zugfestigkeit | 650 - 850 MPa Show Supplier Material materials with Zugfestigkeit of 650 - 850 MPa |
Thermisch
| Property | Temperature | Value | Comment |
|---|---|---|---|
Koeffizient der thermischen Ausdehnung | 100 °C | 1.58e-05 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.58e-05 1/K | for 20°C to the mentioned temperature |
200 °C | 1.61e-05 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.61e-05 1/K | for 20°C to the mentioned temperature | |
300 °C | 1.65e-05 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.65e-05 1/K | for 20°C to the mentioned temperature | |
400 °C | 1.69e-05 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.69e-05 1/K | for 20°C to the mentioned temperature | |
500 °C | 1.73e-05 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.73e-05 1/K | for 20°C to the mentioned temperature | |
Max. Betriebstemperatur | 400 °C Show Supplier Material materials with Max. Betriebstemperatur of 400 °C | ||
Spezifische Wärmekapazität | 450 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 450 J/(kg·K) | ||
Wärmeleitfähigkeit | 12 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 12 W/(m·K) |
Elektrisch
| Property | Value |
|---|---|
spezifischer Widerstand | 1e-06 Ω·m Show Supplier Material materials with spezifischer Widerstand of 1e-06 Ω·m |
Chemical properties
| Property | Value |
|---|---|
Chrom | 19 - 21 % Show Supplier Material materials with Chrom of 19 - 21 % |
Eisen | Balance |
Kohlenstoff | 0.02 % Show Supplier Material materials with Kohlenstoff of 0.02 % |
Kupfer | 0.5 - 1.5 % Show Supplier Material materials with Kupfer of 0.5 - 1.5 % |
Mangan | 1 % Show Supplier Material materials with Mangan of 1 % |
Molybdän | 6 - 7 % Show Supplier Material materials with Molybdän of 6 - 7 % |
Nickel | 24 - 26 % Show Supplier Material materials with Nickel of 24 - 26 % |
Phosphor | 0.03 % Show Supplier Material materials with Phosphor of 0.03 % |
Schwefel | 0.01 % Show Supplier Material materials with Schwefel of 0.01 % |
Silizium | 0.5 % Show Supplier Material materials with Silizium of 0.5 % |
Stickstoff | 0.15 - 0.25 % Show Supplier Material materials with Stickstoff of 0.15 - 0.25 % |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Construction industry (especially tunnel and swimming pool construction), Chemical industry, Decorative purposes and kitchen equipment, Flue gas desulfurization plants, Ship building, Use in sea or brackish water, Medical and pharmaceutical industry | |
| Cold Forming | It can be cold formed, as high forming energy is needed because of the work hardening effect. | |
| Corrosion properties | Excellent - It is resistant against intergranular corrosion according to DIN EN ISO 365 part 1 and 2. Halogen rich media can cause pitting corrosion and stress corrosion cracking. In chloride medium and see water it can resist till 70°C as well as in sulfuric acid and phosphoric acid. | |
| General machinability | Average - Because of the alloying elements it is hard to machine this alloy. The machining shoud be done using high-speed steels or hard metals. | |
| Heat Treatment | Solution annealing: 1120-1180°C (water, air) fast cooling | |
| Hot forming | It is formable at 950-1200°C | |
| Polishing ability | Good | |
| Welding | Good - It is weldable using known processes although it tends to hot crack formation. Welding without a filler is not recommended. As a welding filler duplex materials such as 1.4462 are recommended. Using welding fillers lead to the reduction of corrosion ressitance in the welding region. Nickel alloys are also another filler material that can be used but the interlayer temperature should not go over 150°C. | |