Ferro-Titanit® C-Spezial

Want to keep this datasheet? Save it now in your required format

Description

Ferro-Titanit® has a titanium carbide content of around 45% by volume, embedded in an alloyed steel binder phase. The materials combine the properties of steel and tungsten-carbide alloys and are highly wear-resistant.

Diese Materialdaten wurden von Deutsche Edelstahlwerke Specialty Steel (DEW) zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Eigenschaften

Allgemein

PropertyValue

Dichte

6.5 g/cm³

Show Supplier Material materials with Dichte of 6.5 g/cm³

Kornstruktur

Titanium carbide + martensite

Mechanisch

PropertyValue

Biegefestigkeit

1500 MPa

Show Supplier Material materials with Biegefestigkeit of 1500 MPa

Druckfestigkeit

3800 MPa

Show Supplier Material materials with Druckfestigkeit of 3800 MPa

Elastizitätsmodul

292 GPa

Show Supplier Material materials with Elastizitätsmodul of 292 GPa

Härte, Rockwell C

69 [-]

Show Supplier Material materials with Härte, Rockwell C of 69 [-]

Schubmodule

117 GPa

Show Supplier Material materials with Schubmodule of 117 GPa

Thermisch

PropertyTemperatureValueComment

Koeffizient der thermischen Ausdehnung

100 °C

9.2e-06 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 9.2e-06 1/K

for 20°C to the mentioned temperature

200 °C

9.1e-06 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 9.1e-06 1/K

for 20°C to the mentioned temperature

300 °C

9.8e-06 1/K

Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 9.8e-06 1/K

for 20°C to the mentioned temperature

Wärmeleitfähigkeit

20.5 W/(m·K)

Show Supplier Material materials with Wärmeleitfähigkeit of 20.5 W/(m·K)

Elektrisch

PropertyValue

spezifischer Widerstand

7.5e-07 Ω·m

Show Supplier Material materials with spezifischer Widerstand of 7.5e-07 Ω·m

Magnetisch

PropertyValue

Koerzitivfeldstärke

5000 A/m

Show Supplier Material materials with Koerzitivfeldstärke of 5000 A/m

Remanenz

0.315 T

Show Supplier Material materials with Remanenz of 0.315 T

Sättigungspolarisation

0.92 T

Show Supplier Material materials with Sättigungspolarisation of 0.92 T

Chemical properties

PropertyValueComment

Andere

33 %

Show Supplier Material materials with Andere of 33 %

TiC

Chrom

3 %

Show Supplier Material materials with Chrom of 3 %

Eisen

Balance

Kohlenstoff

0.65 %

Show Supplier Material materials with Kohlenstoff of 0.65 %

Molybdän

3 %

Show Supplier Material materials with Molybdän of 3 %

Technological properties

Property
Application areas

All cold work applications in cutting and forming engineering, e.g. for cutting and blanking tools, bending jaws, extrusion punches, deep-drawing dies, form and hobbing punches, clamping jaws, blanking sleeves, tools for the processing of steel, non-ferrous metals, aluminium, etc., as well as machine elements such as pulleys, rollers and guides exposed to heavy wear.

General machinability

In as-delivered condition, this material can be machined by conventional methods.

Heat Treatment

Soft annealing: 750°C,10 hr (Cooling in furnace) Hardness: 49 HRC - Stress-relief-annealing: 600-650°C (cooling in Furnace) - Hardening: 980-1100°C and quenching in vacuum (1 bar N2) - Temepering 150°C (Hardness:69 HRC)