Eigenschaften
Allgemein
| Property | Value |
|---|---|
Dichte | 1.27 g/cm³ Show Supplier Material materials with Dichte of 1.27 g/cm³ |
Mechanisch
| Property | Value | Testing Standard |
|---|---|---|
Biegefestigkeit | 91 MPa Show Supplier Material materials with Biegefestigkeit of 91 MPa | DIN EN ISO 178 |
Biegemodul | 2.5 GPa Show Supplier Material materials with Biegemodul of 2.5 GPa | DIN EN ISO 178 |
Dehnung | 17.5 % Show Supplier Material materials with Dehnung of 17.5 % | DIN EN ISO 527-1 |
Elastizitätsmodul | 2.9 GPa Show Supplier Material materials with Elastizitätsmodul of 2.9 GPa | DIN EN ISO 527-1 |
Schlagzähigkeit, Charpy ungekerbt | 135 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Charpy ungekerbt of 135 kJ/m² | DIN EN ISO 179-1eU |
Zugfestigkeit | 62 MPa Show Supplier Material materials with Zugfestigkeit of 62 MPa | DIN EN ISO 527-1 |
Thermisch
| Property | Value | Comment |
|---|---|---|
Glasübergangstemperatur | 60 °C Show Supplier Material materials with Glasübergangstemperatur of 60 °C | |
Max. Betriebstemperatur | 100 °C Show Supplier Material materials with Max. Betriebstemperatur of 100 °C | Long |
180 °C Show Supplier Material materials with Max. Betriebstemperatur of 180 °C | Short | |
Schmelzpunkt | 220 °C Show Supplier Material materials with Schmelzpunkt of 220 °C |
Rheological Properties
| Property | Value | Testing Standard | Comment |
|---|---|---|---|
Schmelzmassenflussrate | 37 g/10min Show Supplier Material materials with Schmelzmassenflussrate of 37 g/10min | DIN EN ISO 1133 | 230°C/2.16kg |
Technological properties
| Property | ||
|---|---|---|
| Certifications | Explanation of food contact according to FDA and EU 10/2011 on request | |
| Color | Blue | |
| Detectability | Inductive: 4.7 mm Al | |
| Fillers | Detectable Filler | |
| Processing methods | Permissible residual moisture content (%): 0.1, drying temperature (°C): 80, drying time (h): 5, mould temperature (°C): 140, material temperature (°C): 290, cylinder/processing temperature (°C): 290 | |