Allgemein
Property | Temperature | Value | Comment |
---|---|---|---|
Dichte | 23.0 °C | 13.24 g/cm³ Show Supplier Material materials with Dichte of 13.24 g/cm³ | |
Korngröße | 2 - 3 μm Show Supplier Material materials with Korngröße of 2 - 3 μm | tungsten carbide grain size | |
Partikelgröße D90 | 16 μm Show Supplier Material materials with Partikelgröße D90 of 16 μm | max |
Mechanisch
Property | Temperature | Value |
---|---|---|
Härte, Vickers, 30 | 23.0 °C | 1145 [-] Show Supplier Material materials with Härte, Vickers, 30 of 1145 [-] |
Magnetisch
Property | Temperature | Value |
---|---|---|
Koerzitivfeldstärke | 23.0 °C | 10188 A/m Show Supplier Material materials with Koerzitivfeldstärke of 10188 A/m |
Chemical properties
Property | Value | Comment | |
---|---|---|---|
Aluminium | 0.015 % Show Supplier Material materials with Aluminium of 0.015 % | max | |
Chrom | 0.15 % Show Supplier Material materials with Chrom of 0.15 % | max | |
Eisen | 0.15 % Show Supplier Material materials with Eisen of 0.15 % | max | |
Kobalt | 6.5 - 8.5 % Show Supplier Material materials with Kobalt of 6.5 - 8.5 % | ||
Kohlenstoff | as WC balance | ||
Kupfer | 5E-3 % Show Supplier Material materials with Kupfer of 5E-3 % | max | |
Nickel | 0.1 % Show Supplier Material materials with Nickel of 0.1 % | max | |
Niobium | 0.4 % Show Supplier Material materials with Niobium of 0.4 % | max | |
Sauerstoff | 0.25 % Show Supplier Material materials with Sauerstoff of 0.25 % | max | |
Tantal | 1.3 % Show Supplier Material materials with Tantal of 1.3 % | max | |
Titan | 0.5 % Show Supplier Material materials with Titan of 0.5 % | max | |
Vanadium | 0.03 % Show Supplier Material materials with Vanadium of 0.03 % | max | |
Wolfram | as WC balance | ||
Zink | 5E-3 % Show Supplier Material materials with Zink of 5E-3 % | max |
Technological properties
Property | ||
---|---|---|
Application areas | Powder grade I was developed for use in a wide range of tooling products, indexable inserts, woodworking tools or wear parts. | |
Other | Grade I has a tighter specification in cubic carbides and cobalt content compared to grade TS, as well as a significantly lower specification for its aluminium content. The small amount of 1-2 μm sized cubic carbides increases the hardness and decreases the density of the material. Thanks to the fine particle size of the powder, milling characteristics are excellent and comparable to virgin WC-Co powders. |