UHMWPE AST ISO-TECH

Alternative und Handelsbezeichungen
ISO-LEN® 1000 AST

Want to keep this datasheet? Save it now in your required format

Description

ISO-LEN® 1000 has been proven for many years in various fields of application. Due to its wide range of characteristics, this all-round material is being used in products in all areas of technology where particularly high demands on material are required. By adding additives, we also deliver PE-UHMW finished parts with antistatic properties (ISO-LEN® 1000 AST). The key features are:

High abrasion resistance

Low friction coefficient

Self-lubricating

Very high notched impact strength

Related Standards

DIN 7728

Diese Materialdaten wurden von ISO-TECH Kunststoff GmbH zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Comment
Coefficient of friction	0.12 [-] Show Supplier Material materials with Coefficient of friction of 0.12 [-]	DIN 53375, A, Against dry running steel
Dichte	0.96 g/cm³ Show Supplier Material materials with Dichte of 0.96 g/cm³	max., ISO 1183
Wasserabsorption	0.01 % Show Supplier Material materials with Wasserabsorption of 0.01 %	max.

Mechanisch

Property	Value	Comment
Dehnung	200 % Show Supplier Material materials with Dehnung of 200 %	min., ISO 527
Elastizitätsmodul	0.7 GPa Show Supplier Material materials with Elastizitätsmodul of 0.7 GPa	min., ISO 527
Hardness, Ball Indentation	30 MPa Show Supplier Material materials with Hardness, Ball Indentation of 30 MPa	min., ISO 2039-1
Härte, Shore D	61 [-] Show Supplier Material materials with Härte, Shore D of 61 [-]	ISO 868
	65 [-] Show Supplier Material materials with Härte, Shore D of 65 [-]	ISO 868
Schlagfestigkeit, Charpy gekerbt	80 kJ/m² Show Supplier Material materials with Schlagfestigkeit, Charpy gekerbt of 80 kJ/m²	min., ISO 179
Streckgrenze	20 MPa Show Supplier Material materials with Streckgrenze of 20 MPa	ISO 527

Thermisch

Property	Value	Comment
Max. Betriebstemperatur	80 °C Show Supplier Material materials with Max. Betriebstemperatur of 80 °C	Longterm
	Long
	Short
Schmelzpunkt	130 - 135 °C Show Supplier Material materials with Schmelzpunkt of 130 - 135 °C	ISO 3146
Wärmeleitfähigkeit	0.41 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 0.41 W/(m·K)	DIN 52612
Entflammbarkeit	HB UL 94

Elektrisch

Property	Value	Comment
Surface resistivity	1e+09 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+09 Ω/sq	max., IEC 60243
Volume resistivity	1e+06 Ω·cm Show Supplier Material materials with Volume resistivity of 1e+06 Ω·cm	max., IEC 60243

Technological properties

Property

Application areas

Sliding parts, chain guidance and sliding profiles

Certifications

Food Contact: FDA, RoHS,REACH

UV resistance

Partly

UHMWPE AST ISO-TECH

Description

Related Standards

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften