VYPET™ VNT-917 MG

Alternative und Handelsbezeichungen
PET-GF17
Want to keep this datasheet? Save it now in your required format

Description

Polyethylene Terephthalate (PET) with 17% Glass Fiber Reinforced. Contains a minimum of 70% Post-consumer resin

Diese Materialdaten wurden von Lavergne zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

Eigenschaften

Allgemein

PropertyTemperatureValueComment

Dichte

23.0 °C

1.43 g/cm³

Show Supplier Material materials with Dichte of 1.43 g/cm³

ASTM D792

Recycled Content

70 %

Show Supplier Material materials with Recycled Content of 70 %

Mechanisch

PropertyTemperatureValueComment

Biegefestigkeit

23.0 °C

160 MPa

Show Supplier Material materials with Biegefestigkeit of 160 MPa

ASTM D790

Biegemodul

23.0 °C

6 GPa

Show Supplier Material materials with Biegemodul of 6 GPa

ASTM D790

Impact strength, Izod notched, ASTM

23.0 °C

70 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 70 J/m

ASTM D256

Zugfestigkeit

23.0 °C

105 MPa

Show Supplier Material materials with Zugfestigkeit of 105 MPa

ASTM D638

Thermisch

PropertyTemperatureValueComment

Aschegehalt

23.0 °C

17 %

Show Supplier Material materials with Aschegehalt of 17 %

ASTM D5630

Heat deflection temperature, 1.80 MPa

205 °C

Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 205 °C

ASTM D648

Technological properties

Property
Application areas

Automotive structural applications (e.g. headlamps) and electrical components (e.g. brackets).

Certifications

RoHS,RECH,ULE Environmental Claims Validation

Color

Black

Fillers

17% Glass Fiber and Mineral Powder

Processing methods

  • Drying to Dew Point:-18°C or lower
  • Feed zone: 260-270°C
  • Middle zone: 265-290°C
  • Front zone: 270-295°C
  • Nozzle: 280-300°C
  • Melt temperature: 275-290°C
  • Mold temperature (thick wall parts): 25-40°C
  • Mold temperature (thin wall parts): 95-120°C
  • Injection Pressure: Medium
  • Injection Speed: Medium
  • Back Pressure: Low
  • Screw Speed: Medium