Crastin® SK612SF NC010

Alternative und Handelsbezeichungen
PBT-GF15

Want to keep this datasheet? Save it now in your required format

Description

Common features of Crastin® thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL recognition (class V-0). Crastin® thermoplastic polyester resin typically has high chemical and heat ageing resistance. The good melt stability of Crastin® thermoplastic polyester resin normally enables the recycling of properly handled production waste.If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Crastin® thermoplastic polyester resin typically is used in demanding applications in the electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods industry.Crastin® SK612SF is a 15% glass fiber reinforced, low viscosity polybutylene terephthalate for injection molding. It has high flow characteristics and is specifically suitable for super fast production.

Diese Materialdaten wurden von Matmatch zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	1.41 g/cm³ Show Material materials with Dichte of 1.41 g/cm³	ISO 1183
Wasserabsorption	23.0 °C	0.4 % Show Material materials with Wasserabsorption of 0.4 %	Sim. to ISO 62 \| 80mil

Mechanisch

Property	Temperature	Value	Comment
Dehnung	23.0 °C	3.2 % Show Material materials with Dehnung of 3.2 %	ISO 527-1/-2
Elastizitätsmodul	23.0 °C	5.8 GPa Show Material materials with Elastizitätsmodul of 5.8 GPa	ISO 527-1/-2
Poissonzahl	23.0 °C	0.35 [-] Show Material materials with Poissonzahl of 0.35 [-]
Scherfestigkeit	23.0 °C	50 MPa Show Material materials with Scherfestigkeit of 50 MPa	ASTM D 732
Schlagfestigkeit, Charpy gekerbt	23.0 °C	6 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 6 kJ/m²	ISO 179/1eA
Schlagzähigkeit, Charpy ungekerbt	-6.0 °C	30 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 30 kJ/m²	ISO 179/1eU
	23.0 °C	30 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 30 kJ/m²	ISO 179/1eU

Zugfestigkeit	23.0 °C	106 MPa Show Material materials with Zugfestigkeit of 106 MPa	ISO 527-1/-2

Thermisch

Property	Temperature	Value	Comment
Heat deflection temperature, 1.80 MPa		200 °C Show Material materials with Heat deflection temperature, 1.80 MPa of 200 °C	ISO 75-1/-2
Koeffizient der thermischen Ausdehnung	23.0 °C	5E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 5E-5 1/K	ISO 11359-1/-2
Schmelzpunkt		224 °C Show Material materials with Schmelzpunkt of 224 °C	ISO 11357-1/-3 \| 18°F/min
Spezifische Wärmekapazität	23.0 °C	1900 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 1900 J/(kg·K)	of melt
thermischer Ausdehnungskoeffizient, transversal	23.0 °C	9.5E-5 1/K Show Material materials with thermischer Ausdehnungskoeffizient, transversal of 9.5E-5 1/K	ISO 11359-1/-2
Entflammbarkeit	Oxygen index: 19 %, Glow Wire Flammability Index, 120mil: 700 °C, FMVSS Class: B -, Burning rate, Thickness 1 mm: 30 mm/min

Elektrisch

Property	Temperature	Value	Comment
Dielektrizitätskonstante, 1 MHz	23.0 °C	3.2 [-] Show Material materials with Dielektrizitätskonstante, 1 MHz of 3.2 [-]	IEC 62631-2-1
Dielektrizitätskonstante, 100 Hz	23.0 °C	3.8 [-] Show Material materials with Dielektrizitätskonstante, 100 Hz of 3.8 [-]	IEC 62631-2-1
Dissipation factor, 100Hz	23.0 °C	2E-3 [-] Show Material materials with Dissipation factor, 100Hz of 2E-3 [-]	IEC 62631-2-1
Dissipation factor, 1MHz	23.0 °C	0.02 [-] Show Material materials with Dissipation factor, 1MHz of 0.02 [-]	IEC 62631-2-1
Durchschlagfestigkeit	23.0 °C	37 kV/mm Show Material materials with Durchschlagfestigkeit of 37 kV/mm	IEC 60243-1
Kriechstromfestigkeit	23.0 °C	350 V Show Material materials with Kriechstromfestigkeit of 350 V	IEC 60112
Surface resistivity	23.0 °C	1.00E+15 Ω/sq Show Material materials with Surface resistivity of 1.00E+15 Ω/sq	IEC 62631-3-2
Volume resistivity	23.0 °C	1.00E+15 Ω·cm Show Material materials with Volume resistivity of 1.00E+15 Ω·cm	min. \| IEC 62631-3-1

Rheological Properties

Property	Temperature	Value	Comment
Schrumpfung	23.0 °C	0.4 % Show Material materials with Schrumpfung of 0.4 %	ISO 294-4, 2577
Schrumpfung, diagonal	23.0 °C	1.1 % Show Material materials with Schrumpfung, diagonal of 1.1 %	ISO 294-4, 2577

Technological properties

Property
Fillers	15% Glass Fiber
Processing methods	Drying Recommended: yes, Drying Temperature: 120°C, Drying Time, Dehumidified Dryer: 2-4h, Processing Moisture Content: ≤0.04%, Melt Temperature Optimum: 240°C, Min. melt temperature: 235°C, Max. melt temperature: 260°C, Mold Temperature Optimum: 80°C, Min. mold temperature: 30°C, Max. mold temperature: 130°C, Hold pressure range: ≥60MPa, Hold pressure time: 3s/mm, Back pressure: As low as possible, Ejection temperature: 170°C

Crastin® SK612SF NC010

Description

Ashby charts

Empfohlene Literatur

Eigenschaften