Eigenschaften
Allgemein
| Property | Value |
|---|---|
Dichte | 1.48 - 1.51 g/cm³ Show Material materials with Dichte of 1.48 - 1.51 g/cm³ |
Mechanisch
| Property | Value | Comment |
|---|---|---|
Dehnung | 5.5 - 8.0 % Show Material materials with Dehnung of 5.5 - 8.0 % | |
Elastizitätsmodul | 7.0 - 12.0 GPa Show Material materials with Elastizitätsmodul of 7.0 - 12.0 GPa | |
Schlagfestigkeit, Charpy gekerbt | 21.0 - 25.0 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 21.0 - 25.0 kJ/m² | |
Schlagzähigkeit, Charpy ungekerbt | 100 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 100 kJ/m² | |
105 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 105 kJ/m² | ||
Zugfestigkeit | 100.0 - 140.0 MPa Show Material materials with Zugfestigkeit of 100.0 - 140.0 MPa | at 5.5-8% strain |
Thermisch
| Property | Value |
|---|---|
Koeffizient der thermischen Ausdehnung | 2.5e-05 - 5e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.5e-05 - 5e-05 1/K |
Schmelzpunkt | 295 °C Show Material materials with Schmelzpunkt of 295 °C |
Wärmeleitfähigkeit | 0.27 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 0.27 W/(m·K) |
Entflammbarkeit | UL 94 HB |
Elektrisch
| Property | Value |
|---|---|
Dielektrizitätskonstante | 4.5 [-] Show Material materials with Dielektrizitätskonstante of 4.5 [-] |
16 [-] Show Material materials with Dielektrizitätskonstante of 16 [-] | |
spezifischer Widerstand | 100000000.0 - 10000000000.0 Ω·m Show Material materials with spezifischer Widerstand of 100000000.0 - 10000000000.0 Ω·m |
Optisch
| Property | Value |
|---|---|
Transparenz | no |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Brushholders, e-motor bobbins, charge air cooler caps, coil insulation, EGR sensors, hot charged air ducts | |
| Fillers | 40% Glass Fiber | |
| Other | You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search | |
| Processing methods | Injection molding | |