Allgemein
Property | Value |
---|---|
Dichte | 1.33 - 1.37 g/cm³ Show Material materials with Dichte of 1.33 - 1.37 g/cm³ |
Mechanisch
Property | Value | Comment |
---|---|---|
Dehnung | 5.0 - 8.0 % Show Material materials with Dehnung of 5.0 - 8.0 % | |
Elastizitätsmodul | 5.5 - 7.5 GPa Show Material materials with Elastizitätsmodul of 5.5 - 7.5 GPa | |
Schlagfestigkeit, Charpy gekerbt | 10.0 - 25.0 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 10.0 - 25.0 kJ/m² | |
Schlagzähigkeit, Charpy ungekerbt | 80 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 80 kJ/m² | |
100 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 100 kJ/m² | ||
Zugfestigkeit | 90.0 - 125.0 MPa Show Material materials with Zugfestigkeit of 90.0 - 125.0 MPa | at 5-8% strain |
Thermisch
Property | Value |
---|---|
Koeffizient der thermischen Ausdehnung | 2e-05 - 0.00011 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2e-05 - 0.00011 1/K |
Schmelzpunkt | 240.0 - 260.0 °C Show Material materials with Schmelzpunkt of 240.0 - 260.0 °C |
Entflammbarkeit | UL 94 HB |
Elektrisch
Property | Value |
---|---|
Dielektrizitätskonstante | 4 [-] Show Material materials with Dielektrizitätskonstante of 4 [-] |
9 [-] Show Material materials with Dielektrizitätskonstante of 9 [-] | |
spezifischer Widerstand | 1000000000.0 - 10000000000000.0 Ω·m Show Material materials with spezifischer Widerstand of 1000000000.0 - 10000000000000.0 Ω·m |
Optisch
Property | Value |
---|---|
Transparenz | no |
Technological properties
Property | ||
---|---|---|
Application areas | Carbon brush holders, fuel tank caps, bumper support, oil filler pipes, radiatorcaps, gear wheels | |
Fillers | 30% Glass Fiber | |
Other | You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search | |
Processing methods | Injection molding, extrusion, blow molding |