Eigenschaften
Allgemein
| Property | Value |
|---|---|
Dichte | 1.38 - 1.47 g/cm³ Show Material materials with Dichte of 1.38 - 1.47 g/cm³ |
Mechanisch
| Property | Value | Comment |
|---|---|---|
Dehnung | 2.0 - 6.0 % Show Material materials with Dehnung of 2.0 - 6.0 % | |
Elastizitätsmodul | 4.5 - 7.0 GPa Show Material materials with Elastizitätsmodul of 4.5 - 7.0 GPa | |
Schlagfestigkeit, Charpy gekerbt | 5.0 - 11.0 kJ/m² Show Material materials with Schlagfestigkeit, Charpy gekerbt of 5.0 - 11.0 kJ/m² | |
Schlagzähigkeit, Charpy ungekerbt | 30 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 30 kJ/m² | |
55 kJ/m² Show Material materials with Schlagzähigkeit, Charpy ungekerbt of 55 kJ/m² | ||
Zugfestigkeit | 75.0 - 115.0 MPa Show Material materials with Zugfestigkeit of 75.0 - 115.0 MPa | at 2-6% strain |
Thermisch
| Property | Value |
|---|---|
Koeffizient der thermischen Ausdehnung | 2e-05 - 0.00012 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2e-05 - 0.00012 1/K |
Schmelzpunkt | 250.0 - 260.0 °C Show Material materials with Schmelzpunkt of 250.0 - 260.0 °C |
Entflammbarkeit | UL 94 HB |
Elektrisch
| Property | Value |
|---|---|
Dielektrizitätskonstante | 3.5 [-] Show Material materials with Dielektrizitätskonstante of 3.5 [-] |
4.5 [-] Show Material materials with Dielektrizitätskonstante of 4.5 [-] | |
spezifischer Widerstand | 100000000000.0 - 100000000000000.0 Ω·m Show Material materials with spezifischer Widerstand of 100000000000.0 - 100000000000000.0 Ω·m |
Optisch
| Property | Value |
|---|---|
Transparenz | no |
Technological properties
| Property | ||
|---|---|---|
| Application areas | Electrical and electronic components, automotive housings | |
| Fillers | 15% Glass Fiber | |
| Other | You are viewing a generic polymer page, for more information please contact the suppliers or Matmatch, or use our Search under the following link to find more specific grades and formulations based on your application: Polymer Advanced Search | |
| Processing methods | Injection molding | |