EN 10203 Grade TH435 cold rolled

Want to keep this datasheet? Save it now in your required format

Description

TH 435 is a single cold rolled band (black plate in coils) of soft unalloyed steel and in the surface qualities plain, stone finish and matt for conventional packaging sheet. The band is produced in thicknesses of 0,17 to 0,49 mm in steps of 0,005 mm. The surface is oiled in order to avoid corrosion. The strip is applicated for the production of - electrolytically tinned tinplate Tin used for coating has to show a purity grade of 99,85%. Preferred tin plating values (double-sided) are: 1,0 1,4 2,0 2,8 4,0 5,0 5,6 8,4 11,2 14,0 15,1 g/m² Tinplate is also delivered diferentially coated. In this case is necessary a special designation . Appearance of the tinplate surface is determined by the surface characteristics of the basic material and type of tincoating. Available surface qualities: bright, stone finish, silver matt and matt - electrolytically special chromed steel (ECCS) Total Cr-content used for coating consists of metallic chromium and chromium oxides. The mean coating weight of metallic chromium accounts for 50 to 140 mg/m² and 7 to 35 mg/m² for chromium oxides. Surface appearance of ECCS which follows from the application of work rolls of a special surface texture during the last cold rerolling steps is determined by the surface characteristics of the basic material. Available surface qualities: matt, plain, stone finish For the choice of surface refined extra-fine sheets has to be considered the final consumption purpose, e.g. requirements, such as suitability for punching, drawing, folding, beading, welding and soldering. Application of extra-fine sheets: - cans, jugs, canister, buckets - household articles, boxes, closures - ceiling elements, fittings, pressure plates etc.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Eigenschaften

Allgemein

PropertyTemperatureValueComment

Dichte

23.0 °C

7.8 - 7.9 g/cm³

Show Material materials with Dichte of 7.8 - 7.9 g/cm³

Typical for Low Carbon Steel

Mechanisch

PropertyTemperatureValueComment

Elastizitätsmodul

23.0 °C

200 - 215 GPa

Show Material materials with Elastizitätsmodul of 200 - 215 GPa

Typical for Low Carbon Steel

Hardness, Rockwell T

20.0 °C

64 - 65 [-]

Show Material materials with Hardness, Rockwell T of 64 - 65 [-]

Poissonzahl

23.0 °C

0.29 [-]

Show Material materials with Poissonzahl of 0.29 [-]

Typical for Low Carbon Steel

Schubmodule

23.0 °C

82 GPa

Show Material materials with Schubmodule of 82 GPa

Typical for Low Carbon Steel

Streckgrenze Rp 0,2

20.0 °C

435 MPa

Show Material materials with Streckgrenze Rp 0,2 of 435 MPa

Zugfestigkeit

20.0 °C

460 MPa

Show Material materials with Zugfestigkeit of 460 MPa

Thermisch

PropertyTemperatureValueComment

Koeffizient der thermischen Ausdehnung

23.0 °C

1.32E-5 - 1.38E-5 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.32E-5 - 1.38E-5 1/K

Typical for Low Carbon Steel

Max. Betriebstemperatur

500 °C

Show Material materials with Max. Betriebstemperatur of 500 °C

Typical for Carbon Steel

Schmelzpunkt

1480 - 1526 °C

Show Material materials with Schmelzpunkt of 1480 - 1526 °C

Typical for Low Carbon Steel

Spezifische Wärmekapazität

23.0 °C

465 J/(kg·K)

Show Material materials with Spezifische Wärmekapazität of 465 J/(kg·K)

Typical for Low Carbon Steel

Wärmeleitfähigkeit

23.0 °C

25 - 93 W/(m·K)

Show Material materials with Wärmeleitfähigkeit of 25 - 93 W/(m·K)

Typical for Low Carbon Steel

Elektrisch

PropertyTemperatureValueComment

spezifischer Widerstand

23.0 °C

1.43E-7 - 1.74E-7 Ω·m

Show Material materials with spezifischer Widerstand of 1.43E-7 - 1.74E-7 Ω·m

Typical for Carbon Steel

Magnetisch

PropertyValueComment

Curie-Temperatur

770 °C

Show Material materials with Curie-Temperatur of 770 °C

Typical for Low Carbon Steel