SEW 090-1 Grade S890Q quenched in a liquid medium and tempered

Want to keep this datasheet? Save it now in your required format

Description

S890Q is a fluid-tempered high strength weldable fine grained steel with a min. yield point of 890 N/mm². It is applicated for high loaded steel constructions, vehicles, lifting, mining equipment. The usual thickness range amounts 3 to 100 mm. The lowest application temperature accounts for -20°C. The steel is processed by cold forming, at temperatures below the highest permissible stress relieving temperature of 530 to 580 °C. After hot forming at 700 to 1050°C has to be coducted a retempering in order to achieve delivery condition qualities. The steel is combustible and electric arc cuttable subject to appropriate mode of operation. Flame cutting is affected by the surface condition. For product thicknesses above 30 mm is advisable a preheating to 100 to 200 °C in order to assure cold crack resistance. Preheating to 100 to 200 °C is advisable for workpiece temperatures below 5 °C and if the thermal cut edges should be cold formed on processing. Instructions: The steel is suitability tested for the construction of pressure vessels and pressure pipes according to the regulations valid in Germany (VdTÜV-material data sheet 417).

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	7.8 g/cm³ Show Material materials with Dichte of 7.8 g/cm³	Typical for Steel

Mechanisch

Property	Temperature	Value	Comment
Dehnung	20.0 °C	11 % Show Material materials with Dehnung of 11 %
Elastizitätsmodul	23.0 °C	190 - 210 GPa Show Material materials with Elastizitätsmodul of 190 - 210 GPa	Typical for Steel
Poissonzahl	23.0 °C	0.3 [-] Show Material materials with Poissonzahl of 0.3 [-]	Typical for Steel
Streckgrenze	20.0 °C	870 - 890 MPa Show Material materials with Streckgrenze of 870 - 890 MPa
Zugfestigkeit	20.0 °C	940 - 1100 MPa Show Material materials with Zugfestigkeit of 940 - 1100 MPa

Thermisch

Property	Value
Max. Betriebstemperatur, lang	-20 - 0 °C Show Material materials with Max. Betriebstemperatur, lang of -20 - 0 °C

Chemical properties

Property	Value
Bor	5E-3 % Show Material materials with Bor of 5E-3 %
Chrom	0.8 % Show Material materials with Chrom of 0.8 %
Kohlenstoff	0.2 % Show Material materials with Kohlenstoff of 0.2 %
Mangan	1.6 % Show Material materials with Mangan of 1.6 %
Molybdän	0.7 % Show Material materials with Molybdän of 0.7 %
Nickel	2 % Show Material materials with Nickel of 2 %
Niobium	0.05 % Show Material materials with Niobium of 0.05 %
Phosphor	0.03 % Show Material materials with Phosphor of 0.03 %
Schwefel	0.02 % Show Material materials with Schwefel of 0.02 %
Silizium	0.5 % Show Material materials with Silizium of 0.5 %
Vanadium	0.1 % Show Material materials with Vanadium of 0.1 %