SEW 395 Grade G-X2CrNiMoN18-14 solution heat-treated and quenched

Want to keep this datasheet? Save it now in your required format

Description

The fully austenitic material G-X 2 CrNiMoN 18 14, with the material number 1.3952 according to SEW 395-87 (invalidly replaced by GX2CrNiMoN18-14, material number 1.3960 according to SEW 395-98), possesses a defined low value of the relative magnetic permeability of 1.01 maximum (for castings with a wall thickness of up to 50 mm). It is applied for construction components which an interference or shielding of a magnetic field must not occur at. (SEW: steel-iron material specification)

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Eigenschaften

Allgemein

PropertyTemperatureValue

Dichte

20.0 °C

7.8 g/cm³

Show Material materials with Dichte of 7.8 g/cm³

Mechanisch

PropertyTemperatureValueComment

Dehnung

20.0 °C

30 %

Show Material materials with Dehnung of 30 %

Elastizitätsmodul

23.0 °C

195 GPa

Show Material materials with Elastizitätsmodul of 195 GPa

Typical for Austenitic Stainless Steel

Poissonzahl

23.0 °C

0.3 [-]

Show Material materials with Poissonzahl of 0.3 [-]

Typical for Austenitic Stainless Steel

Schubmodule

23.0 °C

77 GPa

Show Material materials with Schubmodule of 77 GPa

Typical for Austenitic Stainless Steel

Streckgrenze Rp 0,2

20.0 °C

240 MPa

Show Material materials with Streckgrenze Rp 0,2 of 240 MPa

Zugfestigkeit

20.0 °C

490 - 690 MPa

Show Material materials with Zugfestigkeit of 490 - 690 MPa

Thermisch

PropertyTemperatureValueComment

Koeffizient der thermischen Ausdehnung

100.0 °C

1.65E-5 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.65E-5 1/K

200.0 °C

1.75E-5 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.75E-5 1/K

300.0 °C

1.75E-5 1/K

Show Material materials with Koeffizient der thermischen Ausdehnung of 1.75E-5 1/K

Schmelzpunkt

1230 - 1480 °C

Show Material materials with Schmelzpunkt of 1230 - 1480 °C

Typical for Austenitic Stainless Steel

Spezifische Wärmekapazität

23.0 °C

440 J/(kg·K)

Show Material materials with Spezifische Wärmekapazität of 440 J/(kg·K)

Typical for Austenitic Stainless Steel

Wärmeleitfähigkeit

20.0 °C

15 W/(m·K)

Show Material materials with Wärmeleitfähigkeit of 15 W/(m·K)

Elektrisch

PropertyTemperatureValue

spezifischer Widerstand

20.0 °C

7.5E-7 Ω·m

Show Material materials with spezifischer Widerstand of 7.5E-7 Ω·m

Chemical properties

PropertyValue

Chrom

16.5 - 18.5 %

Show Material materials with Chrom of 16.5 - 18.5 %

Kohlenstoff

0.03 %

Show Material materials with Kohlenstoff of 0.03 %

Mangan

2 %

Show Material materials with Mangan of 2 %

Molybdän

2.5 - 3 %

Show Material materials with Molybdän of 2.5 - 3 %

Nickel

13 - 15 %

Show Material materials with Nickel of 13 - 15 %

Phosphor

0.04 %

Show Material materials with Phosphor of 0.04 %

Schwefel

0.02 %

Show Material materials with Schwefel of 0.02 %

Silizium

1 %

Show Material materials with Silizium of 1 %

Stickstoff

0.15 - 0.25 %

Show Material materials with Stickstoff of 0.15 - 0.25 %