SEW 520 Grade G18NiMoCr3-6 quenched and tempered (+QT)

Want to keep this datasheet? Save it now in your required format

Description

The material G18NiMoCr3-6 is suitable for fusion welding and is considered to have a good weldability, since it has been successfully used with good results in cast - welded constructions, especially in combination with rolling mill and forged products made from quenchhardened high-strength fine-grain structural steels. In addition to high values for the 0.2% proof strength, the material distinguishes itself by relatively high values of the notch impact energy at the same time. Application: is chiefly applied in the mechanical engineering and the vehicle manufacturing, furthermore in the plant engineering and crane construction, in the offshore-technology as well as in the underground mining at climatically determined temperatures.

Related Standards

SEW 520

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	7.8 - 7.9 g/cm³ Show Material materials with Dichte of 7.8 - 7.9 g/cm³	Typical for Nickel Chromium Molybdenum Steel

Mechanisch

Property	Temperature	Value	Comment
Dehnung	20.0 °C	12 % Show Material materials with Dehnung of 12 %
Elastizitätsmodul	23.0 °C	200 - 215 GPa Show Material materials with Elastizitätsmodul of 200 - 215 GPa	Typical for Nickel Chromium Molybdenum Steel
Poissonzahl	23.0 °C	0.29 [-] Show Material materials with Poissonzahl of 0.29 [-]	Typical for Nickel Chromium Molybdenum Steel
Streckgrenze	20.0 °C	630 - 700 MPa Show Material materials with Streckgrenze of 630 - 700 MPa
Zugfestigkeit	20.0 °C	780 - 980 MPa Show Material materials with Zugfestigkeit of 780 - 980 MPa

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	23.0 °C	1E-5 - 1.3E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1E-5 - 1.3E-5 1/K	Typical for Nickel Chromium Molybdenum Steel
Schmelzpunkt		1382 - 1529 °C Show Material materials with Schmelzpunkt of 1382 - 1529 °C	Typical for Nickel Chromium Molybdenum Steel
Spezifische Wärmekapazität	23.0 °C	448 - 670 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 448 - 670 J/(kg·K)	Typical for Nickel Chromium Molybdenum Steel
Wärmeleitfähigkeit	23.0 °C	34 - 54 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 34 - 54 W/(m·K)	Typical for Nickel Chromium Molybdenum Steel

Chemical properties

Property	Value
Chrom	0.4 - 0.9 % Show Material materials with Chrom of 0.4 - 0.9 %
Kohlenstoff	0.17 - 0.22 % Show Material materials with Kohlenstoff of 0.17 - 0.22 %
Mangan	0.8 - 1.2 % Show Material materials with Mangan of 0.8 - 1.2 %
Molybdän	0.4 - 0.7 % Show Material materials with Molybdän of 0.4 - 0.7 %
Nickel	0.6 - 1 % Show Material materials with Nickel of 0.6 - 1 %
Phosphor	0.02 % Show Material materials with Phosphor of 0.02 %
Schwefel	0.015 % Show Material materials with Schwefel of 0.015 %
Silizium	0.6 % Show Material materials with Silizium of 0.6 %