DIN 1725-1 Grade 3.3525 F

Want to keep this datasheet? Save it now in your required format

Description

The alloy AlMg2Mn0,3 has similar characteristics as the alloy AlMg1,8. The additive of Mn causes an increase of the heat resistance of the material apart from a strength increase with the products of extruding. The material is characterised by a good corrosion resistance. It is sea water steady and steady against saline atmosphere. With the Mg content the strength increases, the cold forming capacity decreases. The alloy is nature hard, i.e. that only by a cold forming shaping however by a purposeful heat treatment a strength increase cannot be attained. The splinter-giving workability and the weldability are improved with increasing Mg content. Application: For metal goods (including table-ware), in food industry (including commercial devices). For transport containers e.g. rolling barrels, in the packaging industry as cans as well as for describe (e.g. road signs).

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM,AluKey zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Alle anzeigen

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value	Condition	Related Standards	Shape
Dichte		2.68 g/cm³ Show Material materials with Dichte of 2.68 g/cm³	F	EN 573-3, EN 1715-3, EN 485, EN 570, EN 755
	20.0 °C	2.68 g/cm³ Show Material materials with Dichte of 2.68 g/cm³	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Dehnung		14.0 % Show Material materials with Dehnung of 14.0 %	F	EN 573-3, EN 755		A50
		16.0 % Show Material materials with Dehnung of 16.0 %	F	EN 573-3, EN 755		A100
	20.0 °C	12.0 % Show Material materials with Dehnung of 12.0 %	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube	A10
	20.0 °C	14.0 % Show Material materials with Dehnung of 14.0 %	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube
Elastizitätsmodul		70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa	F	EN 573-3, EN 1715-3, EN 485, EN 570, EN 755
	20.0 °C	70.0 GPa Show Material materials with Elastizitätsmodul of 70.0 GPa	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube
Härte, Brinell		45.0 [-] Show Material materials with Härte, Brinell of 45.0 [-]	F	EN 573-3, EN 570
	20.0 °C	40.0 [-] Show Material materials with Härte, Brinell of 40.0 [-]	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Poissonzahl		0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Schubmodule		26.3 GPa Show Material materials with Schubmodule of 26.3 GPa	F	EN 573-3, EN 1715-3, EN 485, EN 570, EN 755
	20.0 °C	26.5 GPa Show Material materials with Schubmodule of 26.5 GPa	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube
Zugfestigkeit		160.0 MPa Show Material materials with Zugfestigkeit of 160.0 MPa	F	EN 573-3, EN 485, EN 755
		170.0 - 230.0 MPa Show Material materials with Zugfestigkeit of 170.0 - 230.0 MPa	F	EN 573-3, EN 1715-3
	20.0 °C	150.0 MPa Show Material materials with Zugfestigkeit of 150.0 MPa	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube

Thermisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Koeffizient der thermischen Ausdehnung	20 °C	2.3699999999999997e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3699999999999997e-05 1/K	F	EN 573-3, EN 1715-3, EN 485, EN 570, EN 755
	100 °C	2.3699999999999997e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3699999999999997e-05 1/K	F	EN 573-3, EN 1715-3, EN 485, EN 570, EN 755
Max. Betriebstemperatur		150.0 °C Show Material materials with Max. Betriebstemperatur of 150.0 °C				Typical for Wrought 5000 Series Aluminium
Schmelzpunkt		610.0 - 650.0 °C Show Material materials with Schmelzpunkt of 610.0 - 650.0 °C	F	EN 573-3, EN 1715-3, EN 485, EN 570, EN 755
Spezifische Wärmekapazität	20.0 °C	921.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 921.0 J/(kg·K)	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube
Wärmeleitfähigkeit		140.0 - 160.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 140.0 - 160.0 W/(m·K)	F	EN 573-3, EN 1715-3, EN 485, EN 570, EN 755
	20.0 °C	167.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 167.0 W/(m·K)	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube

Elektrisch

Property	Temperature	Value	Condition	Related Standards	Shape
Elektrische Leitfähigkeit		25000000.0 - 30000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 25000000.0 - 30000000.0 S/m	F	EN 573-3, EN 1715-3, EN 485, EN 570, EN 755
	20.0 °C	26000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 26000000.0 S/m	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube
spezifischer Widerstand		3.33e-08 - 4e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.33e-08 - 4e-08 Ω·m	F	EN 573-3, EN 1715-3, EN 485, EN 570, EN 755

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chrom	0.15 % Show Material materials with Chrom of 0.15 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1715-3, EN 485, EN 570, EN 755	Profile, Rod, Tube
Eisen	0.5 % Show Material materials with Eisen of 0.5 %	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube
	0.50 % Show Material materials with Eisen of 0.50 %	F	EN 573-3, EN 1715-3, EN 485, EN 570, EN 755
Kupfer	0.15 % Show Material materials with Kupfer of 0.15 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1715-3, EN 485, EN 570, EN 755	Profile, Rod, Tube
Magnesium	1.7 - 2.4 % Show Material materials with Magnesium of 1.7 - 2.4 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1715-3, EN 485, EN 570, EN 755	Profile, Rod, Tube
Mangan	0.1 - 0.5 % Show Material materials with Mangan of 0.1 - 0.5 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1715-3, EN 485, EN 570, EN 755	Profile, Rod, Tube
Silizium	0.4 % Show Material materials with Silizium of 0.4 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1715-3, EN 485, EN 570, EN 755	Profile, Rod, Tube
Titan	0.15 % Show Material materials with Titan of 0.15 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1715-3, EN 485, EN 570, EN 755	Profile, Rod, Tube
Zink	0.15 % Show Material materials with Zink of 0.15 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1715-3, EN 485, EN 570, EN 755	Profile, Rod, Tube

Technological properties

Property
Anodizing	decorative: sufficient, Protective: very good
Brazing	hard brazing (with flux/ without flux): sufficient / poor, friction soldering: good, soft brazing with flux: sufficient
Corrosion properties	Seawater: good, weathering: very good
Workability	Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) good (O) / acceptable (H12)

Looking for suppliers of this material? Click to see 2 supplier of DIN 1725-1 Grade 3.3525 F on Matmatch