EN 10025-3 Grade S460NL normalized or normalized formed (+N)

Want to keep this datasheet? Save it now in your required format

Description

The alloyed, normalised/normalising rolled high grade steel S460NL is a weldable fine-grained steel with a min. yield point of 460 N/mm². The steel is applicated in normalized condition for several types of welded constructions such as fixed and movable storage container, high-pressure pipes, bridge and load-bearing constructions etc. Cold forming: Suitability for cold bending, folding, cold flanging or cold welting has to be agreed. For sheet, strip and wide flat steel in thermo mechanical rolled condition, for nominal thickness (s) up to 16 mm can be warranted the following bending radius values: longitudinal: 5 x s transverse: 4 x s Sheet and strip of nominal thicknesses < 8 mm for cold forming of sections is available on arrangement (e.g. for production of hollow sections). Requirements regarding hot dip zinc coating by arrangement.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Comment
Dichte	7.8 g/cm³ Show Material materials with Dichte of 7.8 g/cm³	Typical for Steel

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Dehnung		15.6 % Show Material materials with Dehnung of 15.6 %				Predicted Value, A80
		15.7 % Show Material materials with Dehnung of 15.7 %				Predicted Value, A200
		17.5 % Show Material materials with Dehnung of 17.5 %				Predicted Value, Transverse
		18.3 % Show Material materials with Dehnung of 18.3 %				Predicted Value, A80 Transverse
		20.9 % Show Material materials with Dehnung of 20.9 %				Predicted Value, A5
		23.4 % Show Material materials with Dehnung of 23.4 %				Predicted Value, A50
	20 °C	16 % Show Material materials with Dehnung of 16 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	17 % Show Material materials with Dehnung of 17 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Elastizitätsmodul		190 - 210 GPa Show Material materials with Elastizitätsmodul of 190 - 210 GPa				Typical for Steel
Flächenreduzierung		43.8 % Show Material materials with Flächenreduzierung of 43.8 %				Predicted Value, Transverse
		51.5 % Show Material materials with Flächenreduzierung of 51.5 %				Predicted Value
Härte, Brinell		251 [-] Show Material materials with Härte, Brinell of 251 [-]				Predicted Value, Transverse
Poissonzahl		0.3 [-] Show Material materials with Poissonzahl of 0.3 [-]				Typical for Steel
Scherfestigkeit		527.9 MPa Show Material materials with Scherfestigkeit of 527.9 MPa				Predicted Value
Schubmodule		80.2 GPa Show Material materials with Schubmodule of 80.2 GPa				Predicted Value
Streckgrenze		259.8 MPa Show Material materials with Streckgrenze of 259.8 MPa				Predicted Value, RP1
		319.7 MPa Show Material materials with Streckgrenze of 319.7 MPa				Predicted Value, RP1 Transverse
		408.3 MPa Show Material materials with Streckgrenze of 408.3 MPa				Predicted Value, Transverse
		429.3 MPa Show Material materials with Streckgrenze of 429.3 MPa				Predicted Value, RP02
		469.9 MPa Show Material materials with Streckgrenze of 469.9 MPa				Predicted Value, RP02 Transverse
		506.8 MPa Show Material materials with Streckgrenze of 506.8 MPa				Predicted Value, RP002
		531.5 MPa Show Material materials with Streckgrenze of 531.5 MPa				Predicted Value, RP05
	20 °C	370 MPa Show Material materials with Streckgrenze of 370 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	380 MPa Show Material materials with Streckgrenze of 380 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	400 MPa Show Material materials with Streckgrenze of 400 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	410 MPa Show Material materials with Streckgrenze of 410 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	430 MPa Show Material materials with Streckgrenze of 430 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	440 MPa Show Material materials with Streckgrenze of 440 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	460 MPa Show Material materials with Streckgrenze of 460 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Zugfestigkeit	20 °C	510 - 720 MPa Show Material materials with Zugfestigkeit of 510 - 720 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 700 MPa Show Material materials with Zugfestigkeit of 510 - 700 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	510 - 690 MPa Show Material materials with Zugfestigkeit of 510 - 690 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	520 - 690 MPa Show Material materials with Zugfestigkeit of 520 - 690 MPa	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Flat
	20 °C	530 - 720 MPa Show Material materials with Zugfestigkeit of 530 - 720 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	530 - 700 MPa Show Material materials with Zugfestigkeit of 530 - 700 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	530 - 690 MPa Show Material materials with Zugfestigkeit of 530 - 690 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	550 - 720 MPa Show Material materials with Zugfestigkeit of 550 - 720 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
	20 °C	550 - 700 MPa Show Material materials with Zugfestigkeit of 550 - 700 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	20 °C	550 - 690 MPa Show Material materials with Zugfestigkeit of 550 - 690 MPa	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire

Thermisch

Property	Value	Comment
Koeffizient der thermischen Ausdehnung	11.83 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 11.83 1/K	Predicted Value
Spezifische Wärmekapazität	454.3 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 454.3 J/(kg·K)	Predicted Value
Wärmeleitfähigkeit	38.26 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 38.26 W/(m·K)	Predicted Value

Elektrisch

Property	Value	Comment
Elektrische Leitfähigkeit	5 S/m Show Material materials with Elektrische Leitfähigkeit of 5 S/m	Predicted Value
spezifischer Widerstand	35 Ω·m Show Material materials with spezifischer Widerstand of 35 Ω·m	Predicted Value

Chemical properties

Property	Value	Condition	Related Standards	Shape
Aluminium	0.02 % Show Material materials with Aluminium of 0.02 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Chrom	0.3 % Show Material materials with Chrom of 0.3 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Kohlenstoff	0.2 % Show Material materials with Kohlenstoff of 0.2 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Kupfer	0.55 % Show Material materials with Kupfer of 0.55 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	0.7 % Show Material materials with Kupfer of 0.7 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat
Mangan	1 - 1.7 % Show Material materials with Mangan of 1 - 1.7 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Molybdän	0.1 % Show Material materials with Molybdän of 0.1 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Nickel	0.8 % Show Material materials with Nickel of 0.8 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Niobium	0.05 % Show Material materials with Niobium of 0.05 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat
	0.2 % Show Material materials with Niobium of 0.2 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
Phosphor	0.025 % Show Material materials with Phosphor of 0.025 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	0.03 % Show Material materials with Phosphor of 0.03 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat
Schwefel	0.02 % Show Material materials with Schwefel of 0.02 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	0.025 % Show Material materials with Schwefel of 0.025 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat
Silizium	0.6 % Show Material materials with Silizium of 0.6 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Stickstoff	0.025 % Show Material materials with Stickstoff of 0.025 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire, Bar
Titan	0.03 % Show Material materials with Titan of 0.03 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat
	0.05 % Show Material materials with Titan of 0.05 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
Vanadium	0.05 % Show Material materials with Vanadium of 0.05 %	normalized or normalized formed (+N)	EN 10025-3, EN 10113-2	Strip, Sheet, Flat, Rod, Wire
	0.2 % Show Material materials with Vanadium of 0.2 %	normalized or normalized formed (+N)	EN 10113-2, EN 10025-3	Sheet, Strip, Bar, Flat

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 13 supplier of EN 10025-3 Grade S460NL normalized or normalized formed (+N) on Matmatch

EN 10025-3 Grade S460NL normalized or normalized formed (+N)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 10 other suppliers for this grade.

Preview all suppliers

Empfohlene Literatur

Eigenschaften