EN 10209 Grade DC03ED cold rolled, skin passed

Want to keep this datasheet? Save it now in your required format

Description

Cold rolled low carbon steel for flat products for vitreous enamelling (direct enamelling, as well as for special applications of conventional two coat enamelling for better sag resistance). Application: domestic appliances (cooking, laundry), sanitary ware (bathtubs, shower trays, sinks), architectural panels (interior and exterior), signage,The soft unalloyed steel DCO1ED, mat. No. 1.0399, is a cold formable steel and suitable for direct enameling as well as for special conventional applications of two-coat enameling, especially if there should be preferably enameled non deforming. In this case are necessary special measures in order to improve enamel`s adhesion. Mechanical specific values and freedom of stretcher strains are warranted for 6 months. Application: simple reforming parts pots, pans, covering caps for gas kitchen stoves, baking sheets, simple shower bases etc. Welding: DC01ED is weldable acc. to the fusion welding methods: MAG (metal active gas/plasma welding arc hand welding laser welding gas welding resistance welding (spot, roll seam, buckle welding)

Related Standards

EN 10209

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	20.0 °C	7.8 - 7.9 g/cm³ Show Material materials with Dichte of 7.8 - 7.9 g/cm³	Typical for Low Carbon Steel

Mechanisch

Property	Temperature	Value	Comment
Dehnung A80	20.0 °C	34 % Show Material materials with Dehnung A80 of 34 %
Dehnung A80, transversal	20.0 °C	30 - 34 % Show Material materials with Dehnung A80, transversal of 30 - 34 %
Elastizitätsmodul	20.0 °C	200 - 215 GPa Show Material materials with Elastizitätsmodul of 200 - 215 GPa	Typical for Low Carbon Steel
Poissonzahl	20.0 °C	0.29 [-] Show Material materials with Poissonzahl of 0.29 [-]	Typical for Low Carbon Steel
Streckgrenze	20.0 °C	140 - 240 MPa Show Material materials with Streckgrenze of 140 - 240 MPa
Streckgrenze, transversal	20.0 °C	140 - 280 MPa Show Material materials with Streckgrenze, transversal of 140 - 280 MPa
Zugfestigkeit	20.0 °C	270 - 370 MPa Show Material materials with Zugfestigkeit of 270 - 370 MPa
Zugfestigkeit, transversal	20.0 °C	270 - 370 MPa Show Material materials with Zugfestigkeit, transversal of 270 - 370 MPa

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	20.0 °C	1.32E-5 - 1.38E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.32E-5 - 1.38E-5 1/K	Typical for Low Carbon Steel
Schmelzpunkt		1480 - 1526 °C Show Material materials with Schmelzpunkt of 1480 - 1526 °C	Typical for Low Carbon Steel

Magnetisch

Property	Value	Comment
Curie-Temperatur	770 °C Show Material materials with Curie-Temperatur of 770 °C	Typical for Low Carbon Steel

Chemical properties

Property	Value
Kohlenstoff	4E-3 % Show Material materials with Kohlenstoff of 4E-3 %
Mangan	0.4 % Show Material materials with Mangan of 0.4 %
Phosphor	0.04 % Show Material materials with Phosphor of 0.04 %
Schwefel	0.05 % Show Material materials with Schwefel of 0.05 %

Looking for suppliers of this material? Click to see 1 supplier of EN 10209 Grade DC03ED cold rolled, skin passed on Matmatch