EN 10216-2 Grade X11CrMo5 +I,isothermic annealed

Want to keep this datasheet? Save it now in your required format

Description

Seamless steel tube for pressure purposes with specified elevated temperature properties. The steel grade meet the essential requirements of Directive 97/23/EC.,Seamless tubes of the high-temperature X11CrMo+I are used in steam boiler and pipeline construction, pressure vessel and apparatus engineering, especially in chemical industry and power station construction at temperatures from approx. 200 °C to maximum 400 °C and simultaneously high pressures. The total load and the special scaling circumstances can decrease or increase the temperature limit. Weldability is available.,Seamless tubes of the high-temperature X11CrMo+I are used in steam boiler and pipeline construction, pressure vessel and apparatus engineering, especially in chemical industry and power station construction at temperatures up to approx. 550 °C and simultaneously high pressures. The total load and the special scaling circumstances can decrease or increase the temperature limit. When welding it should be considered that the behavior of the steel depends during and after welding on the applied heat treatment, the preparation and execution of the welding.

Related Standards

EN 10216-2

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

All categories

Eigenschaften

Mechanisch

Property	Temperature	Value
Dehnung	20.0 °C	22 % Show Material materials with Dehnung of 22 %
Dehnung, transversal	20.0 °C	20 % Show Material materials with Dehnung, transversal of 20 %
Streckgrenze Rp 0,2	20.0 °C	175 MPa Show Material materials with Streckgrenze Rp 0,2 of 175 MPa
	100.0 °C	156 MPa Show Material materials with Streckgrenze Rp 0,2 of 156 MPa
	150.0 °C	150 MPa Show Material materials with Streckgrenze Rp 0,2 of 150 MPa
	200.0 °C	148 MPa Show Material materials with Streckgrenze Rp 0,2 of 148 MPa
	250.0 °C	147 MPa Show Material materials with Streckgrenze Rp 0,2 of 147 MPa
	300.0 °C	145 MPa Show Material materials with Streckgrenze Rp 0,2 of 145 MPa
	350.0 °C	142 MPa Show Material materials with Streckgrenze Rp 0,2 of 142 MPa
	400.0 °C	137 MPa Show Material materials with Streckgrenze Rp 0,2 of 137 MPa
	450.0 °C	129 MPa Show Material materials with Streckgrenze Rp 0,2 of 129 MPa
	500.0 °C	116 MPa Show Material materials with Streckgrenze Rp 0,2 of 116 MPa

Streckgrenze Rp 0,2, transversal	20.0 °C	175 MPa Show Material materials with Streckgrenze Rp 0,2, transversal of 175 MPa
Zugfestigkeit	20.0 °C	430 - 580 MPa Show Material materials with Zugfestigkeit of 430 - 580 MPa
Zugfestigkeit, transversal	20.0 °C	430 - 580 MPa Show Material materials with Zugfestigkeit, transversal of 430 - 580 MPa

Thermisch

Property	Value
Max. Betriebstemperatur, lang	0 - 550 °C Show Material materials with Max. Betriebstemperatur, lang of 0 - 550 °C

Chemical properties

Property	Value
Aluminium	0.04 % Show Material materials with Aluminium of 0.04 %
Chrom	4 - 6 % Show Material materials with Chrom of 4 - 6 %
Kohlenstoff	0.08 - 0.15 % Show Material materials with Kohlenstoff of 0.08 - 0.15 %
Kupfer	0.3 % Show Material materials with Kupfer of 0.3 %
Mangan	0.3 - 0.6 % Show Material materials with Mangan of 0.3 - 0.6 %
Molybdän	0.45 - 0.65 % Show Material materials with Molybdän of 0.45 - 0.65 %
Phosphor	0.03 % Show Material materials with Phosphor of 0.03 %
Schwefel	0.01 - 0.02 % Show Material materials with Schwefel of 0.01 - 0.02 %
Silizium	0.15 - 0.5 % Show Material materials with Silizium of 0.15 - 0.5 %

EN 10216-2 Grade X11CrMo5 +I,isothermic annealed

Description

Related Standards

Ashby charts

Empfohlene Literatur

Eigenschaften