EN 10137-3 Grade S620AL quenched and tempered (+QT)

Want to keep this datasheet? Save it now in your required format

Description

S620AL is a precipitation hardening and weldable fine grained steel. yield point: >620 N/mm² application: welded steel constructions of various types, e.g. bridges and load-carrying constructions as well as transport vehicles, lifting and earthmoving machines. application limits: at -40°C is warranted a notch impact energy of 40 J (longitudinal test specimen) cold formability: for nominal size < 16 mm bending radius in transversal direction 3xs in longitudinal direction 4xs (s= nominal thickness) hot forming property: allowed only for stress relieve annealing temperature (max. 580°C) suitability for welding: Steel is weldable according to the common welding methods (EURONORM-INFORMATION Nr. 2 has to be considered)

Related Standards

EN 10137-3

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	23.0 °C	7.8 g/cm³ Show Material materials with Dichte of 7.8 g/cm³	Typical for Steel

Mechanisch

Property	Temperature	Value	Comment
Dehnung	20.0 °C	15 % Show Material materials with Dehnung of 15 %
Elastizitätsmodul	23.0 °C	190 - 210 GPa Show Material materials with Elastizitätsmodul of 190 - 210 GPa	Typical for Steel
Poissonzahl	23.0 °C	0.3 [-] Show Material materials with Poissonzahl of 0.3 [-]	Typical for Steel
Streckgrenze	20.0 °C	580 - 620 MPa Show Material materials with Streckgrenze of 580 - 620 MPa
Zugfestigkeit	20.0 °C	710 - 880 MPa Show Material materials with Zugfestigkeit of 710 - 880 MPa

Chemical properties

Property	Value
Kohlenstoff	0.03 - 0.12 % Show Material materials with Kohlenstoff of 0.03 - 0.12 %
Mangan	0.3 - 1.8 % Show Material materials with Mangan of 0.3 - 1.8 %
Phosphor	0.02 % Show Material materials with Phosphor of 0.02 %
Schwefel	0.01 % Show Material materials with Schwefel of 0.01 %
Silizium	0.5 % Show Material materials with Silizium of 0.5 %

Looking for suppliers of this material? Click to see 1 supplier of EN 10137-3 Grade S620AL quenched and tempered (+QT) on Matmatch