EN 10139 Grade DC01 cold-rolled, strain-hardened (C340)

Want to keep this datasheet? Save it now in your required format

Description

Cold rolled uncoated low carbon steel narrow strip for cold forming.,The non-alloy steel DC01 acc. to DIN EN 10130 is suitable for cold forming of simple profile forms and components. Mechanical foldings are possible for thicknesses of up to 1,5 mm. To freedom of stretcher strains applies a period of 3 months after provision of the products for surface type B. Welding: DC01 is weldable by the following welding methods: MAG (metal-active-gas), plasma welding, laser welding, compression weld welding, resistance welding (spot, roll weld, buckle welding), arc welding. The steel acts as substrate for surface refined and coated bands and sheets. Application of DC01: household appliances industry, construction trade, car manufacturing, traffic system. Acc. to DIN EN 10139 DC01 is offered as cold rolled band or bar, cut in strength range HK270 to HK690. On welding of DC01in condition HK290 to HK690 has to be considered the potential influence to the mechanical properties

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Dichte	20.0 °C	7.8 - 7.9 g/cm³ Show Material materials with Dichte of 7.8 - 7.9 g/cm³	Typical for Low Carbon Steel

Mechanisch

Property	Temperature	Value	Comment
Elastizitätsmodul	20.0 °C	200 - 215 GPa Show Material materials with Elastizitätsmodul of 200 - 215 GPa	Typical for Low Carbon Steel
Härte, Vickers	20.0 °C	105 - 155 [-] Show Material materials with Härte, Vickers of 105 - 155 [-]
Poissonzahl	20.0 °C	0.29 [-] Show Material materials with Poissonzahl of 0.29 [-]	Typical for Low Carbon Steel
Streckgrenze	20.0 °C	250 MPa Show Material materials with Streckgrenze of 250 MPa
Zugfestigkeit	20.0 °C	340 - 490 MPa Show Material materials with Zugfestigkeit of 340 - 490 MPa

Thermisch

Property	Temperature	Value	Comment
Koeffizient der thermischen Ausdehnung	20.0 °C	1.32E-5 - 1.38E-5 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.32E-5 - 1.38E-5 1/K	Typical for Low Carbon Steel
Schmelzpunkt		1480 - 1526 °C Show Material materials with Schmelzpunkt of 1480 - 1526 °C	Typical for Low Carbon Steel

Magnetisch

Property	Value	Comment
Curie-Temperatur	770 °C Show Material materials with Curie-Temperatur of 770 °C	Typical for Low Carbon Steel

Chemical properties

Property	Value
Kohlenstoff	0.12 % Show Material materials with Kohlenstoff of 0.12 %
Mangan	0.6 % Show Material materials with Mangan of 0.6 %
Phosphor	0.05 % Show Material materials with Phosphor of 0.05 %
Schwefel	0.045 % Show Material materials with Schwefel of 0.045 %

Looking for suppliers of this material? Click to see 50 supplier of EN 10139 Grade DC01 cold-rolled, strain-hardened (C340) on Matmatch

EN 10139 Grade DC01 cold-rolled, strain-hardened (C340)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 47 other suppliers for this grade.

Preview all suppliers

Empfohlene Literatur

Eigenschaften