EN 10025-2 Grade S235J2 normalized or normalized formed (+N)

Want to keep this datasheet? Save it now in your required format

Description

The hot rolled, unalloyed quality steel S235J2 is a fine grained steel for welding constructions for alternate loading. The steel is not intended for heat treatment. Stress relieving annealing is allowed. Products in the delivery condition +N may be hot formed and/or normalized after delivery. For long products and continuous rolled flats the delivery condition is up to the producer +AR, +N or +M. The delivery condition of four-high rolled sheet is also up to the producer and may be +AR or +N. Both conditions can be ordered. For this steel are available (mat. no 1.0119, S235J2C) grades for folding, roll forming to shape and cold drawing. The steel grade S235J2 (1.0117) replaces the steel grade S235J2G3 (1.0116) according to EN 10025 (1994-03).

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Comment
Dichte	7.8 - 7.9 g/cm³ Show Material materials with Dichte of 7.8 - 7.9 g/cm³	Typical for Low Carbon Steel

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Dehnung		18.4 % Show Material materials with Dehnung of 18.4 %				Predicted Value, A200
		21.4 % Show Material materials with Dehnung of 21.4 %				Predicted Value, A5
		26.6 % Show Material materials with Dehnung of 26.6 %				Predicted Value, A50
	20 °C	15 % Show Material materials with Dehnung of 15 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	16 % Show Material materials with Dehnung of 16 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	17 % Show Material materials with Dehnung of 17 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	17 % Show Material materials with Dehnung of 17 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	18 % Show Material materials with Dehnung of 18 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	18 % Show Material materials with Dehnung of 18 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	19 % Show Material materials with Dehnung of 19 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80 Transverse
	20 °C	19 % Show Material materials with Dehnung of 19 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	20 % Show Material materials with Dehnung of 20 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	21 % Show Material materials with Dehnung of 21 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	A80
	20 °C	21 % Show Material materials with Dehnung of 21 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	21 % Show Material materials with Dehnung of 21 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	22 % Show Material materials with Dehnung of 22 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	22 % Show Material materials with Dehnung of 22 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	23 % Show Material materials with Dehnung of 23 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	24 % Show Material materials with Dehnung of 24 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire	Transverse
	20 °C	24 % Show Material materials with Dehnung of 24 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	26 % Show Material materials with Dehnung of 26 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Elastizitätsmodul		200 - 215 GPa Show Material materials with Elastizitätsmodul of 200 - 215 GPa				Typical for Low Carbon Steel
Flächenreduzierung		44.1 % Show Material materials with Flächenreduzierung of 44.1 %				Predicted Value, Transverse
		50.8 % Show Material materials with Flächenreduzierung of 50.8 %				Predicted Value
Härte, Brinell		249 [-] Show Material materials with Härte, Brinell of 249 [-]				Predicted Value, Transverse
Poissonzahl	20 °C	0.284 [-] Show Material materials with Poissonzahl of 0.284 [-]	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Scherfestigkeit		511.9 MPa Show Material materials with Scherfestigkeit of 511.9 MPa				Predicted Value
Schubmodule		82 GPa Show Material materials with Schubmodule of 82 GPa				Typical for Low Carbon Steel
Streckgrenze		263.7 MPa Show Material materials with Streckgrenze of 263.7 MPa				Predicted Value, RP1
		269.2 MPa Show Material materials with Streckgrenze of 269.2 MPa				Predicted Value, RP05
		278.1 MPa Show Material materials with Streckgrenze of 278.1 MPa				Predicted Value, Transverse
		320.4 MPa Show Material materials with Streckgrenze of 320.4 MPa				Predicted Value, RP1 Transverse
		349.1 MPa Show Material materials with Streckgrenze of 349.1 MPa				Predicted Value, RP02
		445.3 MPa Show Material materials with Streckgrenze of 445.3 MPa				Predicted Value, RP02 Transverse
		468.1 MPa Show Material materials with Streckgrenze of 468.1 MPa				Predicted Value, RP002
	20 °C	165 MPa Show Material materials with Streckgrenze of 165 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	175 MPa Show Material materials with Streckgrenze of 175 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	185 MPa Show Material materials with Streckgrenze of 185 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	195 MPa Show Material materials with Streckgrenze of 195 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	215 MPa Show Material materials with Streckgrenze of 215 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	225 MPa Show Material materials with Streckgrenze of 225 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	235 MPa Show Material materials with Streckgrenze of 235 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	100 °C	159 - 187 MPa Show Material materials with Streckgrenze of 159 - 187 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	159 - 180 MPa Show Material materials with Streckgrenze of 159 - 180 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	159 - 173 MPa Show Material materials with Streckgrenze of 159 - 173 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	159 MPa Show Material materials with Streckgrenze of 159 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	173 - 187 MPa Show Material materials with Streckgrenze of 173 - 187 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	173 - 180 MPa Show Material materials with Streckgrenze of 173 - 180 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	173 MPa Show Material materials with Streckgrenze of 173 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	180 - 187 MPa Show Material materials with Streckgrenze of 180 - 187 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	180 MPa Show Material materials with Streckgrenze of 180 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	100 °C	187 MPa Show Material materials with Streckgrenze of 187 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	137 - 161 MPa Show Material materials with Streckgrenze of 137 - 161 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	137 - 155 MPa Show Material materials with Streckgrenze of 137 - 155 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	137 - 149 MPa Show Material materials with Streckgrenze of 137 - 149 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	137 MPa Show Material materials with Streckgrenze of 137 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	149 - 161 MPa Show Material materials with Streckgrenze of 149 - 161 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	149 - 155 MPa Show Material materials with Streckgrenze of 149 - 155 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	149 MPa Show Material materials with Streckgrenze of 149 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	155 - 161 MPa Show Material materials with Streckgrenze of 155 - 161 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	155 MPa Show Material materials with Streckgrenze of 155 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	200 °C	161 MPa Show Material materials with Streckgrenze of 161 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	115 - 143 MPa Show Material materials with Streckgrenze of 115 - 143 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	115 - 136 MPa Show Material materials with Streckgrenze of 115 - 136 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	115 - 129 MPa Show Material materials with Streckgrenze of 115 - 129 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	115 MPa Show Material materials with Streckgrenze of 115 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	129 - 143 MPa Show Material materials with Streckgrenze of 129 - 143 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	129 - 136 MPa Show Material materials with Streckgrenze of 129 - 136 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	129 MPa Show Material materials with Streckgrenze of 129 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	136 - 143 MPa Show Material materials with Streckgrenze of 136 - 143 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	136 MPa Show Material materials with Streckgrenze of 136 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	250 °C	143 MPa Show Material materials with Streckgrenze of 143 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	102 - 122 MPa Show Material materials with Streckgrenze of 102 - 122 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	102 - 117 MPa Show Material materials with Streckgrenze of 102 - 117 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	102 - 112 MPa Show Material materials with Streckgrenze of 102 - 112 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	102 MPa Show Material materials with Streckgrenze of 102 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	112 - 122 MPa Show Material materials with Streckgrenze of 112 - 122 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	112 - 117 MPa Show Material materials with Streckgrenze of 112 - 117 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	112 MPa Show Material materials with Streckgrenze of 112 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	117 - 122 MPa Show Material materials with Streckgrenze of 117 - 122 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	117 MPa Show Material materials with Streckgrenze of 117 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
	300 °C	122 MPa Show Material materials with Streckgrenze of 122 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025
Zugfestigkeit	20 °C	330 - 510 MPa Show Material materials with Zugfestigkeit of 330 - 510 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	330 - 500 MPa Show Material materials with Zugfestigkeit of 330 - 500 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	330 - 490 MPa Show Material materials with Zugfestigkeit of 330 - 490 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	330 - 480 MPa Show Material materials with Zugfestigkeit of 330 - 480 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	340 - 510 MPa Show Material materials with Zugfestigkeit of 340 - 510 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	340 - 500 MPa Show Material materials with Zugfestigkeit of 340 - 500 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	340 - 490 MPa Show Material materials with Zugfestigkeit of 340 - 490 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	340 - 480 MPa Show Material materials with Zugfestigkeit of 340 - 480 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 510 MPa Show Material materials with Zugfestigkeit of 350 - 510 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 500 MPa Show Material materials with Zugfestigkeit of 350 - 500 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 490 MPa Show Material materials with Zugfestigkeit of 350 - 490 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	350 - 480 MPa Show Material materials with Zugfestigkeit of 350 - 480 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 510 MPa Show Material materials with Zugfestigkeit of 360 - 510 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 500 MPa Show Material materials with Zugfestigkeit of 360 - 500 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 490 MPa Show Material materials with Zugfestigkeit of 360 - 490 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
	20 °C	360 - 480 MPa Show Material materials with Zugfestigkeit of 360 - 480 MPa	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire

Thermisch

Property	Value	Comment
Koeffizient der thermischen Ausdehnung	1.32e-05 - 1.38e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 1.32e-05 - 1.38e-05 1/K	Typical for Low Carbon Steel
Max. Betriebstemperatur	294.5 °C Show Material materials with Max. Betriebstemperatur of 294.5 °C	Predicted Value, Long
	500 °C Show Material materials with Max. Betriebstemperatur of 500 °C	Typical for Carbon Steel
Schmelzpunkt	1480 - 1526 °C Show Material materials with Schmelzpunkt of 1480 - 1526 °C	Typical for Low Carbon Steel
Spezifische Wärmekapazität	465 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 465 J/(kg·K)	Typical for Low Carbon Steel
Wärmeleitfähigkeit	25 - 93 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 25 - 93 W/(m·K)	Typical for Low Carbon Steel

Elektrisch

Property	Value	Comment
Elektrische Leitfähigkeit	7 S/m Show Material materials with Elektrische Leitfähigkeit of 7 S/m	Predicted Value
spezifischer Widerstand	1.43e-07 - 1.74e-07 Ω·m Show Material materials with spezifischer Widerstand of 1.43e-07 - 1.74e-07 Ω·m	Typical for Carbon Steel

Magnetisch

Property	Value	Comment
Curie-Temperatur	770 °C Show Material materials with Curie-Temperatur of 770 °C	Typical for Low Carbon Steel

Chemical properties

Property	Value	Condition	Related Standards	Shape
Kohlenstoff	0.17 % Show Material materials with Kohlenstoff of 0.17 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Kupfer	0.55 % Show Material materials with Kupfer of 0.55 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Mangan	1.4 % Show Material materials with Mangan of 1.4 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Phosphor	0.025 % Show Material materials with Phosphor of 0.025 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire
Schwefel	0.025 % Show Material materials with Schwefel of 0.025 %	normalized or normalized formed (+N)	EN 10025-2, EN 10025	Strip, Sheet, Flat, Rod, Wire

Technological properties

Property
Supplier Disclaimer	The given information is a rough description and some properties can depend on various factors such as product thickness. Please contact the supplier or refer to the related norm or standard for further information.

Looking for suppliers of this material? Click to see 32 supplier of EN 10025-2 Grade S235J2 normalized or normalized formed (+N) on Matmatch

EN 10025-2 Grade S235J2 normalized or normalized formed (+N)

Description

Related Standards

Equivalent Materials

Ashby charts

There are 29 other suppliers for this grade.

Preview all suppliers

Empfohlene Literatur

Eigenschaften