Allgemein
Property | Temperature | Value | Comment |
---|---|---|---|
Dichte | 23.0 °C | 1.14 g/cm³ Show Supplier Material materials with Dichte of 1.14 g/cm³ | ASTM D 792 |
Moisture absorption | 23.0 °C | 1.3 % Show Supplier Material materials with Moisture absorption of 1.3 % | ASTM D 570 | (23°C/50% RH/24 hrs) |
Mechanisch
Property | Temperature | Value | Comment |
---|---|---|---|
Biegefestigkeit | 23.0 °C | 103 MPa Show Supplier Material materials with Biegefestigkeit of 103 MPa | ASTM D 790 |
Biegemodul | 23.0 °C | 2.9 GPa Show Supplier Material materials with Biegemodul of 2.9 GPa | ASTM D 790 |
Dehnung | 23.0 °C | 4.5 % Show Supplier Material materials with Dehnung of 4.5 % | ASTM D 638 | break |
Elastizitätsmodul | 23.0 °C | 3.5 GPa Show Supplier Material materials with Elastizitätsmodul of 3.5 GPa | ASTM D 638 | 50 mm/min |
Impact strength, Izod notched, ASTM | 23.0 °C | 58 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 58 J/m | ASTM D 256 |
Impact strength, Izod unnotched, ASTM | 23.0 °C | 640 J/m Show Supplier Material materials with Impact strength, Izod unnotched, ASTM of 640 J/m | ASTM D 4812 | 23°C |
Schlagzähigkeit, Izod gekerbt | 23.0 °C | 58 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Izod gekerbt of 58 kJ/m² | ASTM D 256 | notched, 23°C |
Zugfestigkeit | 23.0 °C | 76 MPa Show Supplier Material materials with Zugfestigkeit of 76 MPa | ASTM D 638 | break |
Thermisch
Property | Value | Comment |
---|---|---|
Heat deflection temperature, 0.45 MPa | 180 °C Show Supplier Material materials with Heat deflection temperature, 0.45 MPa of 180 °C | ASTM D 648 | 3.2 mm, unannealed |
Heat deflection temperature, 1.80 MPa | 57 °C Show Supplier Material materials with Heat deflection temperature, 1.80 MPa of 57 °C | ASTM D 648 | 3.2mm, unannealed |
Wärmeformbeständigkeitstemperatur | 57 - 180 °C Show Supplier Material materials with Wärmeformbeständigkeitstemperatur of 57 - 180 °C |
Rheological Properties
Technological properties
Property | ||
---|---|---|
Application areas | Enclosures | |
Availability | Europe,Asia,Americas | |
Processing methods | Drying Temperature: 80°C | |
Supplier Disclaimer | While the information is provided in good faith, SABIC MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each Buyer must determine the suitability of SABIC's materials for the Buyer's particular use through appropriate testing and analysis. No statement by SABIC concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. |