Allgemein
Mechanisch
Property | Temperature | Value | Comment |
---|---|---|---|
Dehnung | 23.0 °C | 30 % Show Supplier Material materials with Dehnung of 30 % | min., Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. |
Elastizitätsmodul | 20.0 °C | 195 GPa Show Supplier Material materials with Elastizitätsmodul of 195 GPa | |
100.0 °C | 190 GPa Show Supplier Material materials with Elastizitätsmodul of 190 GPa | ||
200.0 °C | 182 GPa Show Supplier Material materials with Elastizitätsmodul of 182 GPa | ||
300.0 °C | 174 GPa Show Supplier Material materials with Elastizitätsmodul of 174 GPa | ||
400.0 °C | 166 GPa Show Supplier Material materials with Elastizitätsmodul of 166 GPa | ||
500.0 °C | 158 GPa Show Supplier Material materials with Elastizitätsmodul of 158 GPa | ||
Härte, Rockwell B | 23.0 °C | 95 [-] Show Supplier Material materials with Härte, Rockwell B of 95 [-] | max. |
Kerbschlagenergie | -270.0 °C | 60 J Show Supplier Material materials with Kerbschlagenergie of 60 J | min., EN 13445-2 (UFPV-2) and EN 10216-5 |
-196.0 °C | 60 J Show Supplier Material materials with Kerbschlagenergie of 60 J | min., EN 13445-2 (UFPV-2) and EN 10216-5 | |
Streckgrenze Rp 0,2 | 20.0 °C | 270 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 270 MPa | min. |
50.0 °C | 250 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 250 MPa | min. | |
100.0 °C | 230 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 230 MPa | min. | |
150.0 °C | 215 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 215 MPa | min. | |
200.0 °C | 200 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 200 MPa | min. | |
250.0 °C | 190 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 190 MPa | min. | |
300.0 °C | 175 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 175 MPa | min. | |
350.0 °C | 165 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 165 MPa | min. | |
400.0 °C | 155 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 155 MPa | min. | |
450.0 °C | 145 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 145 MPa | min. | |
500.0 °C | 140 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 140 MPa | min. | |
550.0 °C | 121 MPa Show Supplier Material materials with Streckgrenze Rp 0,2 of 121 MPa | min. | |
Streckgrenze Rp0,1 | 20.0 °C | 300 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 300 MPa | min. |
50.0 °C | 285 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 285 MPa | min. | |
100.0 °C | 260 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 260 MPa | min. | |
150.0 °C | 245 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 245 MPa | min. | |
200.0 °C | 230 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 230 MPa | min. | |
250.0 °C | 215 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 215 MPa | min. | |
300.0 °C | 205 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 205 MPa | min. | |
350.0 °C | 195 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 195 MPa | min. | |
400.0 °C | 185 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 185 MPa | min. | |
450.0 °C | 175 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 175 MPa | min. | |
500.0 °C | 170 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 170 MPa | min. | |
550.0 °C | 146 MPa Show Supplier Material materials with Streckgrenze Rp0,1 of 146 MPa | min. | |
Verlängerung A2 | 23.0 °C | 25 % Show Supplier Material materials with Verlängerung A2 of 25 % | min., Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. |
Zugfestigkeit | 20.0 °C | 580 - 780 MPa Show Supplier Material materials with Zugfestigkeit of 580 - 780 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. |
50.0 °C | 555 MPa Show Supplier Material materials with Zugfestigkeit of 555 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. | |
100.0 °C | 530 MPa Show Supplier Material materials with Zugfestigkeit of 530 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. | |
150.0 °C | 510 MPa Show Supplier Material materials with Zugfestigkeit of 510 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. | |
200.0 °C | 500 MPa Show Supplier Material materials with Zugfestigkeit of 500 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. | |
250.0 °C | 490 MPa Show Supplier Material materials with Zugfestigkeit of 490 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. | |
300.0 °C | 480 MPa Show Supplier Material materials with Zugfestigkeit of 480 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. | |
350.0 °C | 470 MPa Show Supplier Material materials with Zugfestigkeit of 470 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. | |
400.0 °C | 460 MPa Show Supplier Material materials with Zugfestigkeit of 460 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. | |
450.0 °C | 455 MPa Show Supplier Material materials with Zugfestigkeit of 455 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. | |
500.0 °C | 450 MPa Show Supplier Material materials with Zugfestigkeit of 450 MPa | Requirements according to EN 1.4466, W.-Nr. 1.4465 and AFNOR can be fulfilled on request. | |
Thermisch
Property | Temperature | Value | Comment |
---|---|---|---|
Koeffizient der thermischen Ausdehnung | 100.0 °C | 1.55E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.55E-5 1/K | for 30°C to the mentioned temperature |
200.0 °C | 1.6E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.6E-5 1/K | for 30°C to the mentioned temperature | |
300.0 °C | 1.65E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.65E-5 1/K | for 30°C to the mentioned temperature | |
400.0 °C | 1.7E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.7E-5 1/K | for 30°C to the mentioned temperature | |
500.0 °C | 1.7E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.7E-5 1/K | for 30°C to the mentioned temperature | |
600.0 °C | 1.7E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.7E-5 1/K | for 30°C to the mentioned temperature | |
700.0 °C | 1.75E-5 1/K Show Supplier Material materials with Koeffizient der thermischen Ausdehnung of 1.75E-5 1/K | for 30°C to the mentioned temperature | |
Spezifische Wärmekapazität | 20.0 °C | 485 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 485 J/(kg·K) | |
100.0 °C | 505 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 505 J/(kg·K) | ||
200.0 °C | 540 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 540 J/(kg·K) | ||
300.0 °C | 565 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 565 J/(kg·K) | ||
400.0 °C | 585 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 585 J/(kg·K) | ||
500.0 °C | 605 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 605 J/(kg·K) | ||
600.0 °C | 615 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 615 J/(kg·K) | ||
700.0 °C | 625 J/(kg·K) Show Supplier Material materials with Spezifische Wärmekapazität of 625 J/(kg·K) | ||
Wärmeleitfähigkeit | 20.0 °C | 13 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 13 W/(m·K) | |
100.0 °C | 15 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 15 W/(m·K) | ||
200.0 °C | 17 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 17 W/(m·K) | ||
300.0 °C | 19 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 19 W/(m·K) | ||
400.0 °C | 21 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 21 W/(m·K) | ||
500.0 °C | 23 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 23 W/(m·K) | ||
600.0 °C | 25 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 25 W/(m·K) | ||
700.0 °C | 26 W/(m·K) Show Supplier Material materials with Wärmeleitfähigkeit of 26 W/(m·K) | ||
Magnetisch
Property | Temperature | Value | Comment |
---|---|---|---|
Relative magnetische Permeabilität | 23.0 °C | 1 [-] Show Supplier Material materials with Relative magnetische Permeabilität of 1 [-] | at 6400–55700 A/m |
Chemical properties
Property | Value | Comment | |
---|---|---|---|
Chrom | 25 % Show Supplier Material materials with Chrom of 25 % | ||
Eisen | Balance | ||
Kohlenstoff | 0.02 % Show Supplier Material materials with Kohlenstoff of 0.02 % | max. | |
Mangan | 1.7 % Show Supplier Material materials with Mangan of 1.7 % | ||
Molybdän | 2.1 % Show Supplier Material materials with Molybdän of 2.1 % | ||
Nickel | 22 % Show Supplier Material materials with Nickel of 22 % | ||
Phosphor | 0.02 % Show Supplier Material materials with Phosphor of 0.02 % | max. | |
Schwefel | 0.01 % Show Supplier Material materials with Schwefel of 0.01 % | max. | |
Silizium | 0.4 % Show Supplier Material materials with Silizium of 0.4 % | max. | |
Stickstoff | 0.12 % Show Supplier Material materials with Stickstoff of 0.12 % |
Technological properties
Property | ||
---|---|---|
Application areas | Sandvik 2RE69 is used successfully in all critical high-pressure units of modern urea processes, such as: Sandvik 2RE69 has also found extensive use in other corrosive environments in fertilizer plants, such as: | |
Certifications | Urea specifications issued by: Stamicarbon, Snamprogetti, Urea Casale and Kellogg Approvals: | |
Cold Forming | The excellent formability of Sandvik 2RE69 permits cold bending to small bending radii. Annealing is not normally necessary after cold bending. Heat treatment, if any, should take the form of solution annealing, see under 'Heat treatment'. | |
Corrosion properties | General corrosion: Sandvik 2RE69 was originally developed for stripper tubes used in the production of urea. Practical experience has confirmed its excellent corrosion resistance in urea/carbamate solutions at high pressures and temperatures. Sandvik 2RE69 is also highly resistant to inorganic acids, as illustrated by the iso-corrosion diagram for nitric acid, Figure 1. Intergranular corrosion: Sandvik 2RE69 is highly resistant to intergranular corrosion after welding. Huey test values for TIG welded specimens are typically below 0.12 mm/year for unsensitized material (4.8 mpy, 0.66 μm/48 h). A statistical evaluation of Huey tests, as specified in the urea specifications, is shown in Figure 2. A maximum value of 0.12 mm/year (4.8 mpy, 0.66 μm/48 h) can be guaranteed for straight Sandvik 2RE69 tubes in the 'as delivered' condition. Max. 20 μm (8 mils) selective attack is similarly guaranteed. Pitting and crevice corrosion: Sandvik 2RE69 has very good resistance to pitting, as illustrated in Figure 3, and is also far more resistant to crevice corrosion than ASTM 316L. Stress corrosion cracking (SCC): Conventional austenitic stainless steels of type ASTM 304 and 316 are susceptible to stress corrosion cracking (SCC) in chloride-bearing solutions at temperatures exceeding about 60°C (140°F). The higher nickel content makes Sandvik 2RE69 slightly more resistant, as assessed in laboratory tests, see Figure 4. Erosion corrosion: The good mechanical strength of Sandvik 2RE69 makes it resistant to erosion-corrosion. Ferrules for urea strippers are one application where this property is utilized. | |
Heat Treatment | If heat treatment is needed after further processing the following is recommended. Solution annealing: 1070–1120°C (1960–2050°F), 5–15 minutes, depending on size, followed by rapid cooling in water or air. | |
Hot forming | Hot bending is carried out at 1100–850°C (2010–1560°F), usually without subsequent heat treatment. | |
Machining | The chip removing machining of stainless steels always requires an adjustment of cutting data and machining method to give satisfactory results. When turning is undertaken with carbide tipped tools, the cutting speed should be reduced by 30% for finish machining and 60% for rough machining compared with the cutting speeds applied for ASTM 316L. Much the same applies to other operations. If high speed steel tools are used, the cutting speed should be reduced by 20 % compared with the cutting speeds applied for ASTM 316L. Sandvik can provide detailed recommendations for the choice of tools and cutting data. Data to be selected as for grade Sanmac 316/316L, taking into account the above comments. | |
Other | Forms of supply: Sandvik 2RE69 seamless tube and pipe is supplied in dimensions up to 355 mm (14.0 in.) outside diameter in the solution annealed and white pickled condition, or solution annealed by a bright annealing process. U-tubes can be supplied on request. Other forms of supply: | |
Welding | The weldability of Sandvik 2RE69 is good. Welding must be carried out without preheating, and normally there is no need for any subsequent heat treatment. Suitable methods of fusion welding are manual metal-arc welding (MMA/SMAW) and gas-shielded arc welding, with the TIG/GTAW method as first choice. In common with all fully austenitic stainless steels, Sandvik 2RE69 has low thermal conductivity and high thermal expansion. Welding plans should therefore be carefully selected in advance, so that distortions of the welded joint are minimized. If residual stresses are a concern, solution annealing can be performed after welding. For Sandvik 2RE69, heat-input of <1.0 kJ/mm and interpass temperature of <100°C (210°F) are recommended. A string bead welding technique should be used. Recommended filler metals:
|