KetaSpire® PEEK MS NT1 AM Filament

Want to keep this datasheet? Save it now in your required format

Description

Ketaspire® MS NT1 AM Filament provides long-term performance up to 240°C, including exceptional chemical resistance, outstanding wear and abrasion resistance. These properties make it particularly suited for metal replacement in critical applications in severe end-use environments, such as Oil & Gas, Aerospace and Automotive.

Diese Materialdaten wurden von Solvay Specialty Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Eigenschaften

Allgemein

PropertyValueComment

Dichte

1.29 g/cm³

Show Supplier Material materials with Dichte of 1.29 g/cm³

ASTM D792

Abmessung

PropertyValue

Durchmesser

1.75 mm

Show Supplier Material materials with Durchmesser of 1.75 mm

Mechanisch

PropertyValueComment

Dehnung

26.0 %

Show Supplier Material materials with Dehnung of 26.0 %

ASTM D638

Elastizitätsmodul

3.12 GPa

Show Supplier Material materials with Elastizitätsmodul of 3.12 GPa

ASTM D638

Elongation at yield

4.8 %

Show Supplier Material materials with Elongation at yield of 4.8 %

ASTM D638

Impact strength, Izod notched, ASTM

81.0 J/m

Show Supplier Material materials with Impact strength, Izod notched, ASTM of 81.0 J/m

ASTM D256

Streckgrenze

85.0 MPa

Show Supplier Material materials with Streckgrenze of 85.0 MPa

ASTM D638

Zugfestigkeit

48.0 MPa

Show Supplier Material materials with Zugfestigkeit of 48.0 MPa

ASTM D638

Thermisch

PropertyValueComment

Schmelzpunkt

343.0 °C

Show Supplier Material materials with Schmelzpunkt of 343.0 °C

ASTM D3418

Technological properties

Property
Application areas

Aerospace Applications, Automotive Applications, Oil/Gas Applications

Certifications

Substances used to manufacture the polymer grade used for this filament meets the requirements of Commission Regulation (EU) N°10/2011, which implements the framework regulation EU 1935/2004 as related to plastic materials and articles intended to come into contact with food and its subsequent amendments as well as the GMP requirements for EU 2023/2006.


Please feel free to contact the supplier for RoHS Compliance.

Color

Natural

Features

  • Chemical Resistant
  • Ductile
  • Flame Retardant
  • Good Dimensional Stability
  • Good Impact Resistance
  • High Heat Resistance
  • Other

    Test specimen parameters:

  • First layer: 0.3mm thick
  • Subsequent layers: 0.1mm
  • 100% infill
  • 3 shells
  • Printing speed: 18 mm/s

  • Note:

    Typical properties: these are not to be construed as specifications

    Processing methods

    Fused Filament Fabrication (FFF)


    Printing conditions for above data table:

  • Filament drying conditions, minimum temperature 4h: 150°C
  • Extruder temperature: 400-440°C
  • Bed temperature: 180-220°C
  • Printing tool path: cross hatching in the XY plane