Radel® PPSU MS NT1 AM Filament

Want to keep this datasheet? Save it now in your required format

Description

Radel® MS NT1 AM Filament offers the best of sulfone polymers, with a superiority in both toughness and impact strength, high temperature capabilities, as well as proven outperformance in chemical resistance relative to both PSU and PEI. It enables applications in Aerospace, Healthcare, Smart Devices, and Energy Storage.

Diese Materialdaten wurden von Solvay Specialty Polymers zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Value	Comment
Dichte	1.29 g/cm³ Show Supplier Material materials with Dichte of 1.29 g/cm³	ASTM D792

Abmessung

Property	Value
Durchmesser	1.75 mm Show Supplier Material materials with Durchmesser of 1.75 mm

Mechanisch

Property	Value	Comment
Dehnung	21.0 % Show Supplier Material materials with Dehnung of 21.0 %	ASTM D638
Elastizitätsmodul	2.0 GPa Show Supplier Material materials with Elastizitätsmodul of 2.0 GPa	ASTM D638
Elongation at yield	7.0 % Show Supplier Material materials with Elongation at yield of 7.0 %	ASTM D638
Impact strength, Izod notched, ASTM	480.0 J/m Show Supplier Material materials with Impact strength, Izod notched, ASTM of 480.0 J/m	ASTM D256
Streckgrenze	62.0 MPa Show Supplier Material materials with Streckgrenze of 62.0 MPa	ASTM D638
Zugfestigkeit	42.0 MPa Show Supplier Material materials with Zugfestigkeit of 42.0 MPa	ASTM D638

Thermisch

Property	Value	Comment
Glasübergangstemperatur	220.0 °C Show Supplier Material materials with Glasübergangstemperatur of 220.0 °C	DSC

Technological properties

Property
Application areas	Aerospace Applications, Additive Manufacturing (3D Printing), Energy Storage, Medical/Healthcare applications, Smart Devices
Certifications	Substances used to manufacture the polymer grade used for this filament meets the requirements of Commission Regulation (EU) N°10/2011, which implements the framework regulation EU 1935/2004 as related to plastic materials and articles intended to come into contact with food and its subsequent amendments as well as the GMP requirements for EU 2023/2006. Please feel free to contact the supplier for RoHS Compliance.
Color	Natural
Features	Acid Resistant Base Resistant Chemical Resistant Flame Retardant Good Impact Resistance Good Thermal Stability High Heat Resistance Ultra High Toughness
Other	Test specimen parameters: First layer: 0.3mm thick Subsequent layers: 0.1mm 100% infill 3 shells Printing speed: 18 mm/s Note: Typical properties: these are not to be construed as specifications
Processing methods	Fused Filament Fabrication (FFF) Printing conditions for above data table: Filament drying conditions, minimum temperature 4h: 150°C Extruder temperature: 380-410°C Bed temperature: 180-220°C Printing tool path: cross hatching in the XY plane

Radel® PPSU MS NT1 AM Filament

Description

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Anwendungsfälle

Eigenschaften