DuraSense® 3D Plus 50

Alternative und Handelsbezeichungen
PP-WF50

Want to keep this datasheet? Save it now in your required format

Description

Polypropylene (PP) reinforced with 50% S-Wood fiber (Biocomposite).

This grade is also available as biobased polypropylene (PP).

Physical properties are measured at 23°C and 50% RH

Related Standards

Diese Materialdaten wurden von Stora Enso Biocomposites zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Eigenschaften

Allgemein

Property	Temperature	Value	Comment
Bio-based content		50.0 % Show Supplier Material materials with Bio-based content of 50.0 %
Dichte	23 °C	1.1 g/cm³ Show Supplier Material materials with Dichte of 1.1 g/cm³	ISO 1183

Mechanisch

Property	Temperature	Value	Comment
Biegemodul	23 °C	2.8 GPa Show Supplier Material materials with Biegemodul of 2.8 GPa	ISO 527-2/2
Dehnung	23 °C	7 % Show Supplier Material materials with Dehnung of 7 %	ISO 527-2/50
Elastizitätsmodul	23 °C	2.7 GPa Show Supplier Material materials with Elastizitätsmodul of 2.7 GPa	ISO 527-2/2
Schlagzähigkeit, Charpy ungekerbt	23 °C	12 kJ/m² Show Supplier Material materials with Schlagzähigkeit, Charpy ungekerbt of 12 kJ/m²	ISO 179/1eU
Zugfestigkeit	23 °C	45 MPa Show Supplier Material materials with Zugfestigkeit of 45 MPa	ISO 527-2/50

Thermisch

Property	Value
Entflammbarkeit	UL94: HB

Technological properties

Property
Certifications	Chemical substances: REACH Compliant Raw material: FSC/PEFC™ Chain of Custody Food Applications: EU10/2011, GB4806.6-2016 Production: Approved according to GMP (Good Manufacturing Practice) Toys: EN 71-3, GB 6675.1-2014 ISO certifications: ISO 9001/14001/50001/ OHSAS18001 International Sustainability and Carbon Certification: ICSS Plus
Fillers	50% S-Wood Fiber
Other	General safety instructions, read also Process instructions: Avoid high temperatures an long residence time. At high temperature fibers may degrade and can result in pressure build up in machine. Avoid large piles of purged material, can start to smolder Keep reject material from flammable materials, let cool before disposal i.e in water
Processing methods	Drying: 4 hours at 100°C 3D Extrusion DuraSense® 3D comes in pellet form and is meant to be used in extrusion deposition printing. It is important for optimal surface of the printed material that a significant pressure is built up behind the nozzle. This can be accomplished by setting the layer thickness higher than the actual nozzle diameter. Temperatures: DuraSense® can be melted around 170°C and processed up to 205°C. DuraSense® is sensitive to prolonged exposure to temperatures above 180°C. Avoid unnecessary heating and residence time. Do not set any zones above 205°C. Nozzle: DuraSense® 3D can be used with nozzle diameters equal to or larger than 2mm.

DuraSense® 3D Plus 50

Description

Related Standards

Ashby charts

Anwendungen

Materialien von diesem Anbieter

Eigenschaften