EN 573-3 Grade AW-2017A O

Want to keep this datasheet? Save it now in your required format

Description

The material EN AW-Al Cu4mgSi(A) is produced for sheet, strip and plates, for extruded and drawn components as well as for wire and prewire for mechanical application. It is used for forged parts and prematerial. The alloy is not food-safe. To the comparable mark AlCuMg1, material No. 3.1325, acc. to DIN 1725-1 applies: The alloy pertains to the alloy-type (AlCuMg-Typ) used as the first of the aluminium- forgeable materials in technics. Alloys of this type are usable for natural and artificial aging. They achieve high mechanical strength and they are relatively heat-resistant even in a soft condition. In age hardened condition the material achieves strength above 400 N/mm². Heat-treatment for hardening: Solution annealing: 495° to 505°C, quenching in water Natural aging: 5 to 8 d at RT Artificial aging:16 to 24 h at 180 to 195°C Artificial aging is impossible in practice due to the decreasing corrosion resistance in artificially aged material condition. Even in a naturally aged condition is a surface protection necessary. Considerable strength decrease as well as complicate weldability and hot workability of this alloy as a result of insignificant heat-treatment failures are very unfavorable. Additionally, by welding is caused an economically unacceptable strength loss in the weld seam sector. The application of this material in welding constructions is for economical reasons impossible. It has a very favorable machinability what justifies the application of screws and rivets as connecting elements. The alloy AlCuMg1 is particularly well suitable for construction parts of a higher static load. Application: in machine engineering (incl. mold making) for machine benches, hydraulic turned parts, for tools, appliances (anchor plates, head and punch unit holder plates as well as guide plate). As connecting elements (screws, solid rivets), in vehicle engineering as bumper, axle bearing cases, as body and safety parts and in transport for air freight container as well as in aircraft construction.

Related Standards

Equivalent Materials

Diese Materialdaten wurden von WIAM,AluKey zur Verfügung gestellt

Alle Daten beziehen sich auf Raumtemperatur soweit nicht anderweitig spezifiziert. SI Einheiten werden verwendt soweit nicht anderweitig spezifiziert.
Äquivalente Standards sind ähnlich zu einem oder mehreren Standards die der Anbieter angegeben hat. Manche äquivalente Standards können strikter sein oder außerhalb der Bedingungen des ursprünglichen Standards.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Empfohlene Literatur

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Alle anzeigen

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Eigenschaften

Allgemein

Property	Temperature	Value	Condition	Related Standards	Shape
Dichte		2.8 g/cm³ Show Material materials with Dichte of 2.8 g/cm³	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
	20.0 °C	2.8 g/cm³ Show Material materials with Dichte of 2.8 g/cm³	O	EN 573-3	Rod, Flat, Tube

Mechanisch

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending Fatigue Strength		90.0 MPa Show Material materials with Bending Fatigue Strength of 90.0 MPa	O	EN 573-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
Biegewinkel 180°		0.5 °/t Show Material materials with Biegewinkel 180° of 0.5 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
		1.0 °/t Show Material materials with Biegewinkel 180° of 1.0 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
Biegewinkel 90°		1.0 °/t Show Material materials with Biegewinkel 90° of 1.0 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
		1.5 °/t Show Material materials with Biegewinkel 90° of 1.5 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
		2.5 °/t Show Material materials with Biegewinkel 90° of 2.5 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
		4.0 °/t Show Material materials with Biegewinkel 90° of 4.0 °/t	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
Dehnung		10.0 % Show Material materials with Dehnung of 10.0 %	O	EN 573-3, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar	A50
		12.0 % Show Material materials with Dehnung of 12.0 %	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar	A50
		12.0 % Show Material materials with Dehnung of 12.0 %	O	EN 573-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar	A100
		13.0 % Show Material materials with Dehnung of 13.0 %	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar	A50
		14.0 % Show Material materials with Dehnung of 14.0 %	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar	A50
	20.0 °C	10.0 % Show Material materials with Dehnung of 10.0 %	O	EN 573-3	Rod, Tube	A50
	20.0 °C	12.0 % Show Material materials with Dehnung of 12.0 %	O	EN 573-3	Flat	A50
	20.0 °C	12.0 % Show Material materials with Dehnung of 12.0 %	O	EN 573-3	Flat, Rod, Tube
	20.0 °C	12.0 % Show Material materials with Dehnung of 12.0 %	O	EN 573-3	Flat	A50 Transverse
	20.0 °C	12.0 % Show Material materials with Dehnung of 12.0 %	O	EN 573-3	Flat	Transverse
	20.0 °C	13.0 % Show Material materials with Dehnung of 13.0 %	O	EN 573-3	Flat	A50
	20.0 °C	13.0 % Show Material materials with Dehnung of 13.0 %	O	EN 573-3	Flat	A50 Transverse
	20.0 °C	14.0 % Show Material materials with Dehnung of 14.0 %	O	EN 573-3	Flat	A50
	20.0 °C	14.0 % Show Material materials with Dehnung of 14.0 %	O	EN 573-3	Flat	A50 Transverse
Elastizitätsmodul		72.5 GPa Show Material materials with Elastizitätsmodul of 72.5 GPa	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
	20.0 °C	65.0 - 73.5 GPa Show Material materials with Elastizitätsmodul of 65.0 - 73.5 GPa	O	EN 573-3	Rod, Flat, Tube
Härte, Brinell		55.0 [-] Show Material materials with Härte, Brinell of 55.0 [-]	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
	20.0 °C	45.0 [-] Show Material materials with Härte, Brinell of 45.0 [-]	O	EN 573-3	Rod, Tube
	20.0 °C	55.0 [-] Show Material materials with Härte, Brinell of 55.0 [-]	O	EN 573-3	Flat
	20.0 °C	55.0 [-] Show Material materials with Härte, Brinell of 55.0 [-]	O	EN 573-3	Flat	Transverse
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 2000 Series Aluminium
Poissonzahl		0.33 [-] Show Material materials with Poissonzahl of 0.33 [-]				Typical for Wrought 2000 Series Aluminium
Schubmodule		27.2 GPa Show Material materials with Schubmodule of 27.2 GPa	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
	20.0 °C	26.0 - 28.5 GPa Show Material materials with Schubmodule of 26.0 - 28.5 GPa	O	EN 573-3	Rod, Flat, Tube
Zugfestigkeit		150.0 - 220.0 MPa Show Material materials with Zugfestigkeit of 150.0 - 220.0 MPa	O	EN 573-3, EN 1715-3	Strip, Sheet, Plate, Tube, Bar
		225.0 MPa Show Material materials with Zugfestigkeit of 225.0 MPa	O	EN 573-3, EN 485	Strip, Sheet, Plate, Tube, Bar
		240.0 MPa Show Material materials with Zugfestigkeit of 240.0 MPa	O	EN 573-3, EN 754	Strip, Sheet, Plate, Tube, Bar
		250.0 MPa Show Material materials with Zugfestigkeit of 250.0 MPa	O	EN 573-3, EN 755	Strip, Sheet, Plate, Tube, Bar
	20.0 °C	225.0 MPa Show Material materials with Zugfestigkeit of 225.0 MPa	O	EN 573-3	Flat
	20.0 °C	225.0 MPa Show Material materials with Zugfestigkeit of 225.0 MPa	O	EN 573-3	Flat	Transverse
	20.0 °C	240.0 MPa Show Material materials with Zugfestigkeit of 240.0 MPa	O	EN 573-3	Rod, Tube
	20.0 °C	250.0 MPa Show Material materials with Zugfestigkeit of 250.0 MPa	O	EN 573-3	Rod, Tube
	20.0 °C	436.0 MPa Show Material materials with Zugfestigkeit of 436.0 MPa	O	EN 573-3
	100.0 °C	394.0 MPa Show Material materials with Zugfestigkeit of 394.0 MPa	O	EN 573-3
	150.0 °C	281.0 MPa Show Material materials with Zugfestigkeit of 281.0 MPa	O	EN 573-3
	200.0 °C	155.0 MPa Show Material materials with Zugfestigkeit of 155.0 MPa	O	EN 573-3
	250.0 °C	84.0 MPa Show Material materials with Zugfestigkeit of 84.0 MPa	O	EN 573-3
	300.0 °C	46.0 MPa Show Material materials with Zugfestigkeit of 46.0 MPa	O	EN 573-3
	370.0 °C	32.0 MPa Show Material materials with Zugfestigkeit of 32.0 MPa	O	EN 573-3

Thermisch

Property	Temperature	Value	Condition	Related Standards	Shape
Koeffizient der thermischen Ausdehnung	20 °C	2.3e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3e-05 1/K	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
	100 °C	2.3e-05 1/K Show Material materials with Koeffizient der thermischen Ausdehnung of 2.3e-05 1/K	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
Schmelzpunkt		512.0 - 650.0 °C Show Material materials with Schmelzpunkt of 512.0 - 650.0 °C	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
Spezifische Wärmekapazität	20.0 °C	921.0 J/(kg·K) Show Material materials with Spezifische Wärmekapazität of 921.0 J/(kg·K)	O	EN 573-3	Rod, Flat, Tube
Wärmeleitfähigkeit	20.0 °C	130.0 - 200.0 W/(m·K) Show Material materials with Wärmeleitfähigkeit of 130.0 - 200.0 W/(m·K)	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Rod, Flat, Tube, Strip, Sheet, Plate, Bar

Elektrisch

Property	Temperature	Value	Condition	Related Standards	Shape
Elektrische Leitfähigkeit	20.0 °C	18000000.0 - 28000000.0 S/m Show Material materials with Elektrische Leitfähigkeit of 18000000.0 - 28000000.0 S/m	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Rod, Flat, Tube, Strip, Sheet, Plate, Bar
spezifischer Widerstand		3.57e-08 - 5.56e-08 Ω·m Show Material materials with spezifischer Widerstand of 3.57e-08 - 5.56e-08 Ω·m	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chrom	0.1 % Show Material materials with Chrom of 0.1 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar
Eisen	0.7 % Show Material materials with Eisen of 0.7 %	O	EN 573-3	Flat, Rod, Tube
	0.70 % Show Material materials with Eisen of 0.70 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Strip, Sheet, Plate, Tube, Bar
Kupfer	3.5 - 4.5 % Show Material materials with Kupfer of 3.5 - 4.5 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar
Magnesium	0.4 - 1.0 % Show Material materials with Magnesium of 0.4 - 1.0 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar
Mangan	0.4 - 1.0 % Show Material materials with Mangan of 0.4 - 1.0 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar
Silizium	0.2 - 0.8 % Show Material materials with Silizium of 0.2 - 0.8 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar
Zink	0.25 % Show Material materials with Zink of 0.25 %	O	EN 573-3, EN 1715-3, EN 485, EN 754, EN 755	Flat, Rod, Tube, Strip, Sheet, Plate, Bar

Technological properties

Property
Anodizing	decorative: not suitable, Protective: good
Brazing	hard brazing (with flux/ without flux): not suitable / not suitable, friction soldering: acceptable, soft brazing with flux: not suitable
Corrosion properties	Seawater: poor, weathering: sufficient
Workability	Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) acceptable (O) / acceptable (O)

Looking for suppliers of this material? Click to see 12 supplier of EN 573-3 Grade AW-2017A O on Matmatch