Bosch is world-renowned for its quality and precision in the field of advanced ceramics for the automotive sector. Bosch Advanced Ceramics, the ceramics division of grow platform GmbH, now enables the use of these advanced ceramics in new markets and offers functional ceramics for the household, industrial, electrical, engineering and medical sectors. The combination of innovative production capabilities and Bosch's proprietary materials makes it possible to develop unique and precise ceramic products for a wide variety of markets. The demand for ceramic products is continuously increasing: the requirement is higher complexity combined with precision and economy. At this interface, Bosch Advanced Ceramics sets the new benchmark with innovative production technologies. Ceramic injection molding in combination with inmoldlabeling for functional layers and 3D printing enables the production of complex structures while taking into accountthe highest precision and almost unlimited possibilities in design for use in a wide range of applications - from batch size 1 to large series. Depending on the application, three different materials are available. Zirconium oxide, high-purity aluminum oxide and ZTA are the basic materials for ceramic injection molding or 3D printing. Of course, we are also happy to use other technologies and materials accessible to us to meet your challenge. Here we can draw on existing expertise from the spark plug and lambda sensor sectors.
Spiral-Mixer:
Seamless spiral mixer manufacturing in one piece.
This mixer cannot be manufactured by ceramic injection molding or pressing.
Only additive manufacturing is able tocreate such geometries.
This component is mainly used in the chemicalindustry.
It is used to control the flow of corrosive liquids and gases.
The turbine rotor has the following dimensions:
- Height: 25 mm
- Diameter: 10 mm
- Wall thickness: 0,3 mm
Advantages and application areas of the turbine rotor:
- very good shaft - hub connection
- Extremely good stress distribution
- uniform expansionas well as compression
- High temperature ranges
- speeds in very high range possible
- There is no need to balance it, because it is made in one piece
Sugar-Cube/ Ring with channels:
Ceramic 3D printing enables finest internal channels and structures!
In process technology for example an optimized flow behavior is crucial for a high yield.
Through this production process we can produce complex structures to guide the fluid wherever it needs to go. No matter how intricate the path.
in additionadvanced ceramics provide an ideal thermal management even at high temperatures and combined with cooling fluids entire assembly groups can be realized in a single 3D printed component.
Dimensions:
Ring with channels:
Outer diameter: 12.45 mm
Height: 8,2 mm
Internal channels: 0,7 mm
Sugar cube:
Openings: 0.4 mm
Edge length: 11,5 mm x 8,3 mm
Heat-Exchanger:
If you want to work with high corrosive combustion air or liquidsyou can use this kind of ceramic heat exchangers.
Maybe you have also looked intoCeramic materials. But due to the design limitations of conventionally produced Ceramics many heat exchanger designs were not possible.
3dprintingof Ceramics has proven to be a gamechangerin the design of ceramic components.
Especially for Heat exchangers with very thin channels we can provide a solution that is tailored exactly to your use case!
With our additive manufacturing technologywe are able tocreate internal channels as thin as 1 mm to ensure that you can reach exactly the spot, where you need to remove the heat.
Since we don’t have to machine those channelsit doesn't matter if those channels are straight, bend or a maze.
Dimensions::
Outer diameter -> 20 mm
Component height -> 25 mm
channel diameter -> 1.4 mm
Functional coatings
Durable coatings to extend functionality
Coatings on technical ceramics can have different objectives: Either the existing properties are improved, for example by applying friction-reducing layers, or entirely new properties are added. For example, ceramics – actually an insulating material – can be made conductive at certain points by applying metallic layers. These layers are permanently bonded to the ceramic base material by sintering. The ceramic can thus be used for completely new applications.
Wide range of coating materials and technologies
Depending on the materials used, the coating can be sintered together with the component at high temperatures (co-firing); or the coating is applied to the already sintered component. Then sintering must be carried out again at lower temperatures (post-firing). Co-firing achieves better layer adhesion, but cannot be used with all materials. Bosch Ceramics has already realised many coatings, for example with gold, silver, platinum, chrome but also hard materials such as DLC. The wide range of coating technologies ensures an extensive choice of materials here.
Our processes for functional coatings
In-mold labelling
With In-mold labeling, a film with printed coatings is placed in an injection molding tool and then encapsulated with ceramic material. The film is removed in the subsequent processes, while the functional coating is permanently bonded to the ceramic.
Tampography
With this process, coatings can be applied using a flexible silicone die to non-planar ceramic components, such as curved surfaces.
Screen printing
With screen printing, metallic pastes can be applied with great precision to flat components. For electronics, this means producing multi-layer circuits with ceramic carrier plates (LTCC technology).
CVD
With chemical vapor deposition, highly complex parts can be refined with precise layers on a three-dimensional level. Advanced Ceramics works sustainably using unique processing techniques to avoid the formation of harmful hexavalent chromium.
PVD
The technically demanding process of physical vapor deposition achieves excellent layer adhesion, producing thin, compact coatings in a wide variety of materials.
Webseite
Gründungsjahr
2016
Art
Hersteller
Verarbeitungsmöglichkeiten
3D Printing, Ceramic Injection Molding, Pressing, Fine Machining, Laser Machining, Functional Coatings by Screen printing, Tampon Printing, PVD, CVD
Qualitätszertifikate
ISO 9001, 16949 by Bosch Plants
Umwelt-Zertifizierungen
14001 by Bosch Plants
Sie haben eine E-Mail mit dem Link zum Zurücksetzen Ihres Passworts erhalten.
Engineering Services
Zusätzlich: Aluminium Oxide, Zirconium Oxide, Silicon Oxide
Advanced Ceramics
Ceramic Products
Ceramics
Ceramics In General
Ceramics Raw Materials
Glas und Keramik
Other Standards Related To Ceramics
Herstellung
Materialbearbeitung
Additive Fertigung
Cooking Ranges
Elektrotechnik
Konsumgüter
Küchenausstattung
Ovens & Similar Appliances
Stereolithography
Working Tables
Automobil
Ceramic & Mica Capacitors
Chirurgische Instrumente
Düsen
Electrical & Electronic Testing
Elektrische Isolierung
Elektronik
Elektronische Komponenten
Emission Control Systems
Equipment For The Paper Industry
Flüssigkeitssysteme
Glas- und Keramikisolierung
Healthcare
Industriemaschinen
Kondensatoren
Lager
Mechanische Systeme
Medical Equipment General
Medizinische Ausrüstung
Messtechnik
Metallspritzguss
Non-Destructive Testing
Paper Products
Papierindustrie
Pharmaceutical Packaging
Pharmaceutical Production
Pharmaindustrie
Plain Bearings
Sensoren
Textile Machinery In General
Textilindustrie
Textilmaschinen
Verbrennungsmotoren
Verschleißteile
Zahnmedizin
Zahnmedizinische Instrumente
Commercial & Industrial Heating Appliances
Büchsen
Domestic
Heizelemente
Isolierung
Isolierungen
Anlagen für die Chemieindustrie
Bekleidungsindustrie
Brenner & Boiler
Brillen
Brillenrahmen
Chemie-Industrie
Chemieindustrie Produktion
Elektrisches Gehäuse
Elektrisches Zubehör
Elektromotoren
Energie
Gas Fuel Burners
Geschirrspüler
Kleine Küchengeräte
Other Equipment For The Chemical Industry
Packaging Machinery
Sewing Machines
Verpackung
Versiegelungen
Wäschewaschgeräte
Ceramic Injection Molding
Dental Materials
Implantate
Mechanical Testing
Präzisionsmechanik
Schneiden
Schneidwerkzeuge
Uhren
Zahnimplantate
Zeitmessung