EN 573-3 Grade AW-3005 O

View suppliers (12)
Want to keep this datasheet? Save it now in your required format

Description

Naturally hard AlMn alloy. The alloy is food safe.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM,AluKey,Aludium.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueConditionRelated StandardsShape

Densidad

2.72 g/cm³

Show Material materials with Densidad of 2.72 g/cm³

O

EN 573-3, EN 1396, EN 485, EN 546

Strip, Sheet, Plate, Welded Tube

20.0 °C

2.72 g/cm³

Show Material materials with Densidad of 2.72 g/cm³

O

EN 573-3, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Sheet, Strip, Foil, Flat, Coil, Sheet

Medidas

PropertyValueConditionRelated StandardsThicknessShape

Espesor

0.04 mm

Show Material materials with Espesor of 0.04 mm

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

0.04 mm

Coil, Sheet

2.0 mm

Show Material materials with Espesor of 2.0 mm

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

2.0 mm

Coil, Sheet

Mecánica

PropertyTemperatureValueConditionRelated StandardsShapeComment

Coeficiente de Poisson

0.33 [-]

Show Material materials with Coeficiente de Poisson of 0.33 [-]

Typical for Wrought 3000 Series Aluminium

Dureza Brinell

33.0 [-]

Show Material materials with Dureza Brinell of 33.0 [-]

O

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

20.0 °C

33.0 [-]

Show Material materials with Dureza Brinell of 33.0 [-]

O

EN 573-3

Flat

Dureza Brinell (HBW)

33.0 - 73.0 [-]

Show Material materials with Dureza Brinell (HBW) of 33.0 - 73.0 [-]

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Límite elástico

45.0 MPa

Show Material materials with Límite elástico of 45.0 MPa

O

EN 573-3, EN 1396, EN 485

Strip, Sheet, Plate, Welded Tube

RP02

45 MPa

Show Material materials with Límite elástico of 45 MPa

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20.0 °C

45.0 MPa

Show Material materials with Límite elástico of 45.0 MPa

O

EN 573-3

Sheet, Strip, Flat

RP02 Transverse

20.0 °C

45.0 MPa

Show Material materials with Límite elástico of 45.0 MPa

O

EN 573-3

Sheet, Strip, Flat

RP02

Módulo de cizallamiento

26.0 GPa

Show Material materials with Módulo de cizallamiento of 26.0 GPa

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20.0 °C

26.5 GPa

Show Material materials with Módulo de cizallamiento of 26.5 GPa

O

EN 573-3

Sheet, Strip, Foil, Flat

Módulo elástico

69.0 GPa

Show Material materials with Módulo elástico of 69.0 GPa

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

70.0 GPa

Show Material materials with Módulo elástico of 70.0 GPa

O

EN 573-3, EN 1396, EN 485, EN 546

Strip, Sheet, Plate, Welded Tube

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 3000 Series Aluminium

Resistencia a la tracción

115.0 - 290.0 MPa

Show Material materials with Resistencia a la tracción of 115.0 - 290.0 MPa

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20.0 °C

115.0 - 165.0 MPa

Show Material materials with Resistencia a la tracción of 115.0 - 165.0 MPa

O

EN 573-3

Sheet, Strip, Flat

Transverse

20.0 °C

115.0 - 165.0 MPa

Show Material materials with Resistencia a la tracción of 115.0 - 165.0 MPa

O

EN 573-3, EN 1396, EN 485

Strip, Sheet, Plate, Welded Tube, Flat

20.0 °C

125.0 - 165.0 MPa

Show Material materials with Resistencia a la tracción of 125.0 - 165.0 MPa

O

EN 573-3, EN 546

Strip, Sheet, Plate, Welded Tube, Foil

Ángulo de flexión a 180°

1.0 °/t

Show Material materials with Ángulo de flexión a 180° of 1.0 °/t

O

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Ángulo de flexión a 90°

0.5 °/t

Show Material materials with Ángulo de flexión a 90° of 0.5 °/t

O

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

1.0 °/t

Show Material materials with Ángulo de flexión a 90° of 1.0 °/t

O

EN 573-3, EN 485

Strip, Sheet, Plate, Welded Tube

Aplicaciones térmicas

PropertyTemperatureValueConditionRelated StandardsShapeComment

Calor específico

20.0 °C

893.0 J/(kg·K)

Show Material materials with Calor específico of 893.0 J/(kg·K)

O

EN 573-3

Sheet, Strip, Foil, Flat

Coeficiente de dilatación térmica

20 °C

2.3199999999999998e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.3199999999999998e-05 1/K

O

EN 573-3, EN 1396, EN 485, EN 546

Strip, Sheet, Plate, Welded Tube

100 °C

2.3199999999999998e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.3199999999999998e-05 1/K

O

EN 573-3, EN 1396, EN 485, EN 546

Strip, Sheet, Plate, Welded Tube

100 °C

0.000024 1/K

Show Material materials with Coeficiente de dilatación térmica of 0.000024 1/K

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20-100°C

Conductividad térmica

160.0 - 190.0 W/(m·K)

Show Material materials with Conductividad térmica of 160.0 - 190.0 W/(m·K)

O

EN 573-3, EN 1396, EN 485, EN 546

Strip, Sheet, Plate, Welded Tube

172 W/(m·K)

Show Material materials with Conductividad térmica of 172 W/(m·K)

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

20.0 °C

200.0 W/(m·K)

Show Material materials with Conductividad térmica of 200.0 W/(m·K)

O

EN 573-3

Sheet, Strip, Foil, Flat

Temperatura de fusión

630.0 - 654.0 °C

Show Material materials with Temperatura de fusión of 630.0 - 654.0 °C

O

EN 573-3, EN 1396, EN 485, EN 546

Strip, Sheet, Plate, Welded Tube

Eléctrico

PropertyTemperatureValueConditionRelated StandardsShape

Conductividad eléctrica

23000000.0 - 25000000.0 S/m

Show Material materials with Conductividad eléctrica of 23000000.0 - 25000000.0 S/m

O

EN 573-3, EN 1396, EN 485, EN 546

Strip, Sheet, Plate, Welded Tube

20.0 °C

28000000.0 S/m

Show Material materials with Conductividad eléctrica of 28000000.0 S/m

O

EN 573-3

Sheet, Strip, Foil, Flat

Resistividad eléctrica

3.7999999999999996e-08 Ω·m

Show Material materials with Resistividad eléctrica of 3.7999999999999996e-08 Ω·m

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

4e-08 - 4.35e-08 Ω·m

Show Material materials with Resistividad eléctrica of 4e-08 - 4.35e-08 Ω·m

O

EN 573-3, EN 1396, EN 485, EN 546

Strip, Sheet, Plate, Welded Tube

Chemical properties

PropertyValueConditionRelated StandardsShape

Cobre

0.3 %

Show Material materials with Cobre of 0.3 %

O

EN 573-3, EN 1396, EN 485, EN 546

Sheet, Strip, Foil, Flat, Plate, Welded Tube

0.3 %

Show Material materials with Cobre of 0.3 %

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Cromo

0.1 %

Show Material materials with Cromo of 0.1 %

O

EN 573-3, EN 1396, EN 485, EN 546

Sheet, Strip, Foil, Flat, Plate, Welded Tube

0.1 %

Show Material materials with Cromo of 0.1 %

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Hierro

0.7 %

Show Material materials with Hierro of 0.7 %

O

EN 573-3

Sheet, Strip, Foil, Flat

0.70 %

Show Material materials with Hierro of 0.70 %

O

EN 573-3, EN 1396, EN 485, EN 546

Strip, Sheet, Plate, Welded Tube

0.7 %

Show Material materials with Hierro of 0.7 %

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Magnesio

0.2 - 0.6 %

Show Material materials with Magnesio of 0.2 - 0.6 %

O

EN 573-3, EN 1396, EN 485, EN 546, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Sheet, Strip, Foil, Flat, Plate, Welded Tube, Coil, Sheet

Manganeso

1.0 - 1.5 %

Show Material materials with Manganeso of 1.0 - 1.5 %

O

EN 573-3, EN 1396, EN 485, EN 546, EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Sheet, Strip, Foil, Flat, Plate, Welded Tube, Coil, Sheet

Silicona

0.6 %

Show Material materials with Silicona of 0.6 %

O

EN 573-3, EN 1396, EN 485, EN 546

Sheet, Strip, Foil, Flat, Plate, Welded Tube

0.6 %

Show Material materials with Silicona of 0.6 %

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Titanio

0.1 %

Show Material materials with Titanio of 0.1 %

O

EN 573-3, EN 1396, EN 485, EN 546

Sheet, Strip, Foil, Flat, Plate, Welded Tube

Zinc

0.25 %

Show Material materials with Zinc of 0.25 %

O

EN 573-3, EN 1396, EN 485, EN 546

Sheet, Strip, Foil, Flat, Plate, Welded Tube

0.25 %

Show Material materials with Zinc of 0.25 %

O

EN 573-1, EN 573-2, EN 573-3, EN 485-2, EN 546-2, EN 541

Coil, Sheet

Technological properties

Property
Anodizing

decorative: sufficient, Protective: very good

Application areas

Facades: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Roofing: Single sheet, Sheets for composites/ sandwich Panels; Doors: Sheets for composites/ sandwich Panels, Sheets for mechanized panels; Sun Protection Systems: Single sheet (covering, sun breakers and gutters); Interiors and ceilings: Single sheet, Sheets for composites/ sandwich Panels, Sheets for mechanized panels, Decoration; Electronic devices: Housing of devices; Insulation; Cosmetics: Cosmetics pieces

Brazing

Good

Corrosion properties

Seawater: very good, weathering: very good

Welding

Good

Workability

Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12)