Propiedades
General
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Densidad | 2.72 g/cm³ Show Material materials with Densidad of 2.72 g/cm³ | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Mecánica
| Property | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|
Coeficiente de Poisson | 0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-] | Typical for Wrought 3000 Series Aluminium | |||
Módulo de cizallamiento | 25.0 - 26.0 GPa Show Material materials with Módulo de cizallamiento of 25.0 - 26.0 GPa | Typical for Wrought 3000 Series Aluminium | |||
Módulo elástico | 70.0 GPa Show Material materials with Módulo elástico of 70.0 GPa | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube | |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m | Typical for Wrought 3000 Series Aluminium | |||
Resistencia a la tracción | 200.0 MPa Show Material materials with Resistencia a la tracción of 200.0 MPa | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Aplicaciones térmicas
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Calor específico | 893.0 - 920.0 J/(kg·K) Show Material materials with Calor específico of 893.0 - 920.0 J/(kg·K) | Typical for Wrought 3000 Series Aluminium | ||||
Coeficiente de dilatación térmica | 20 °C | 2.3199999999999998e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.3199999999999998e-05 1/K | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube | |
100 °C | 2.3199999999999998e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.3199999999999998e-05 1/K | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube | ||
Conductividad térmica | 160.0 - 190.0 W/(m·K) Show Material materials with Conductividad térmica of 160.0 - 190.0 W/(m·K) | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube | ||
Temperatura de fusión | 630.0 - 654.0 °C Show Material materials with Temperatura de fusión of 630.0 - 654.0 °C | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Eléctrico
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Conductividad eléctrica | 23000000.0 - 25000000.0 S/m Show Material materials with Conductividad eléctrica of 23000000.0 - 25000000.0 S/m | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Resistividad eléctrica | 4e-08 - 4.35e-08 Ω·m Show Material materials with Resistividad eléctrica of 4e-08 - 4.35e-08 Ω·m | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Cobre | 0.3 % Show Material materials with Cobre of 0.3 % | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Cromo | 0.1 % Show Material materials with Cromo of 0.1 % | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Hierro | 0.70 % Show Material materials with Hierro of 0.70 % | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Magnesio | 0.2 - 0.6 % Show Material materials with Magnesio of 0.2 - 0.6 % | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Manganeso | 1.0 - 1.5 % Show Material materials with Manganeso of 1.0 - 1.5 % | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Silicona | 0.6 % Show Material materials with Silicona of 0.6 % | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Titanio | 0.1 % Show Material materials with Titanio of 0.1 % | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Zinc | 0.25 % Show Material materials with Zinc of 0.25 % | H34 | EN 573-3, EN 1592 | Strip, Sheet, Plate, Welded Tube |
Technological properties
| Property | ||
|---|---|---|
| Anodizing | decorative: sufficient, Protective: very good | |
| Corrosion properties | Seawater: very good, weathering: very good | |
| Workability | Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): acceptable, Deep drawing / upsetting (Condition) very good (O) / acceptable (H12) | |