EN 1706 Grade AC-51000 F

Want to keep this datasheet? Save it now in your required format

Description

Material EN AC-AlMg3(b) is produced as sand and die cast. It shows the following casting characteristics and properties: plasticity: acceptable heat crack resistance: insufficient pressure tightness: insufficient workability (after heat-treatment): excellent corrosion resistance: excellent decorative anodic oxidation: excellent weldability: acceptable polishability: acceptable strength at room temperature: insufficient strength at increased temp. (up to 200°C): good ductility (impact strength): good fatigue strength amounts 60 to 90 N/mm² ( best available casting method, values for vibration durability up to 50*10 hoch 6 cycles [Woehler diagram]).

Related Standards

EN 1706

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM,AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Temperature	Value	Condition	Related Standards
Densidad	20.0 °C	2.7 g/cm³ Show Material materials with Densidad of 2.7 g/cm³	F	EN 1706

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Bending Fatigue Strength		60.0 - 90.0 MPa Show Material materials with Bending Fatigue Strength of 60.0 - 90.0 MPa	F	EN 1706	Casting
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Cast 5xx.x Series Aluminium
Dureza Brinell		50.0 [-] Show Material materials with Dureza Brinell of 50.0 [-]	F	EN 1706	Casting
	20.0 °C	50.0 [-] Show Material materials with Dureza Brinell of 50.0 [-]	F	EN 1706
Módulo elástico		68.0 - 70.0 GPa Show Material materials with Módulo elástico of 68.0 - 70.0 GPa				Typical for Cast 5xx.x Series Aluminium
Resistencia a la tracción		140.0 MPa Show Material materials with Resistencia a la tracción of 140.0 MPa	F	EN 1706	Casting
		150.0 MPa Show Material materials with Resistencia a la tracción of 150.0 MPa	F	EN 1706	Casting
	20.0 °C	140.0 MPa Show Material materials with Resistencia a la tracción of 140.0 MPa	F	EN 1706
	20.0 °C	150.0 MPa Show Material materials with Resistencia a la tracción of 150.0 MPa	F	EN 1706

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Calor específico		963.0 J/(kg·K) Show Material materials with Calor específico of 963.0 J/(kg·K)				Typical for Cast 5xx.x Series Aluminium
Coeficiente de dilatación térmica	20 °C	2.4e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.4e-05 1/K	F	EN 1706	Casting
	100.0 °C	2.4e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.4e-05 1/K	F	EN 1706	Casting
	100 °C	2.4e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.4e-05 1/K	F	EN 1706	Casting
Conductividad térmica	20.0 °C	130.0 - 140.0 W/(m·K) Show Material materials with Conductividad térmica of 130.0 - 140.0 W/(m·K)	F	EN 1706	Casting
Temperatura de fusión		450.0 - 640.0 °C Show Material materials with Temperatura de fusión of 450.0 - 640.0 °C				Typical for Cast 5xx.x Series Aluminium

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape
Conductividad eléctrica	20.0 °C	17000000.0 - 22000000.0 S/m Show Material materials with Conductividad eléctrica of 17000000.0 - 22000000.0 S/m	F	EN 1706	Casting
Resistividad eléctrica		4.55e-08 - 5.88e-08 Ω·m Show Material materials with Resistividad eléctrica of 4.55e-08 - 5.88e-08 Ω·m	F	EN 1706	Casting

Chemical properties

Property	Value	Condition	Related Standards	Shape
Aluminio	94.4 % Show Material materials with Aluminio of 94.4 %	F	EN 1706
Cobre	0.1 % Show Material materials with Cobre of 0.1 %	F	EN 1706	Casting
Hierro	0.55 % Show Material materials with Hierro of 0.55 %	F	EN 1706
	0.55 % Show Material materials with Hierro of 0.55 %	F	EN 1706	Casting
Magnesio	2.5 - 3.5 % Show Material materials with Magnesio of 2.5 - 3.5 %	F	EN 1706	Casting
Manganeso	0.45 % Show Material materials with Manganeso of 0.45 %	F	EN 1706	Casting
Silicona	0.55 % Show Material materials with Silicona of 0.55 %	F	EN 1706	Casting
Titanio	0.2 % Show Material materials with Titanio of 0.2 %	F	EN 1706	Casting
Zinc	0.1 % Show Material materials with Zinc of 0.1 %	F	EN 1706	Casting

Technological properties

Property
Anodizing	decorative: excellent
Corrosion properties	general: excellent
General machinability	after thermal treatment: excellent
Processing methods	permanent mould casting, separately cast test sample