DIN 17742 Grade 2.4889

Want to keep this datasheet? Save it now in your required format

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyTemperatureValueComment

Densidad

23.0 °C

7.75 - 8.4 g/cm³

Show Material materials with Densidad of 7.75 - 8.4 g/cm³

Typical for Nickel Chromium Iron Alloy

Mecánica

PropertyTemperatureValueComment

Módulo elástico

23.0 °C

150 GPa

Show Material materials with Módulo elástico of 150 GPa

Typical for Nickel Chromium Iron Alloy

Aplicaciones térmicas

PropertyTemperatureValueComment

Calor específico

23.0 °C

285 - 545 J/(kg·K)

Show Material materials with Calor específico of 285 - 545 J/(kg·K)

Typical for Nickel Chromium Iron Alloy

Coeficiente de dilatación térmica

23.0 °C

7.6E-6 - 1.7E-5 1/K

Show Material materials with Coeficiente de dilatación térmica of 7.6E-6 - 1.7E-5 1/K

Typical for Nickel Chromium Iron Alloy

Conductividad térmica

23.0 °C

8 - 35 W/(m·K)

Show Material materials with Conductividad térmica of 8 - 35 W/(m·K)

Typical for Nickel Chromium Iron Alloy

Temperatura de fusión

1200 - 1480 °C

Show Material materials with Temperatura de fusión of 1200 - 1480 °C

Typical for Nickel Chromium Iron Alloy

Chemical properties

PropertyValue

Azufre

0.01 %

Show Material materials with Azufre of 0.01 %

Carbono

0.05 - 0.12 %

Show Material materials with Carbono of 0.05 - 0.12 %

Cerio

0.03 - 0.09 %

Show Material materials with Cerio of 0.03 - 0.09 %

Cobre

0.3 %

Show Material materials with Cobre of 0.3 %

Cromo

26 - 29 %

Show Material materials with Cromo of 26 - 29 %

Fósforo

0.02 %

Show Material materials with Fósforo of 0.02 %

Hierro

21 - 25 %

Show Material materials with Hierro of 21 - 25 %

Manganeso

1 %

Show Material materials with Manganeso of 1 %

Níquel

45 %

Show Material materials with Níquel of 45 %

Otro

In the product standard DIN EN 10095 slightly different limits are defined., A maximum value of 1.5 % Co, counted as Ni, is permitted. The identification of Co is not required.

Silicona

2.5 - 3 %

Show Material materials with Silicona of 2.5 - 3 %