No estás conectado

Categories
Cerámica
Carbono
Cerámica de ingeniería
Natural Ceramic
Compuesto
Compuesto de matriz cerámica
Compuesto de matriz metálica
Compuesto de matriz polimérica
Materiales biológicos
Madera
Polímero
Elastómero
Fraguado térmico
Termoplástico
Vidrio
Lead Glass
Vidrio de silicato
Vitrocerámica
Metal
Acero
Aluminio
Cobalto
Cobertura / Bimetálica
Cobre
Hierro
Magnesio
Manganeso
Metal noble
Metal refractario
Níquel
Otros metales
Titanio
Encontrar proveedores de metales
List Your Company
List Your Materials
Matmatch Partners
Resources
Advertise
Media Kit (Advertising)
Case Studies
AMPCO METAL
Deutsche Edelstahlwerke
Phon Technew
CERATIZITnew
Tools
Unit Converter
Hardness Converter
Advanced Search
Application Search
Sobre nosotros

Metal
Aluminio
Aluminio pudelado
5000 Serie
DIN 1725-1 Grade 3.3535 F

DIN 1725-1 Grade 3.3535 F

Want to keep this datasheet? Save it now in your required format

Description

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. It is well polishable and anodisable. The splinter-giving machinability becomes better with increasing Mg content, just as the weldability. The material is used for statically loaded construction units. It is of this type of alloy the material most common used in the technology. For decorative anodising must be proceeded from the anodising quality AlMg3EQ. Application: In the apparatus engineering for pressure and compressed gas according to AD-W6/1 and VdTUEV-Werkstoffblaetter, for tanks for very low-temperatures, for heat exchangers. In the building industry for claddings, roofings, windows, doors and window walls, fittings as well as for carrying constructions according to DIN 4113. In the automobile engineering for commercial motor vehicle superstructures (sheet metal), for silo and tank trucks as well as body parts. For diaphragm disks of brake boosters, in the aircraft construction, in the building of forms predominantly for tools and devices as base, head and stamp plates as well as guide plates. For metal goods (incl. table-ware) and metal-describe, in food industry (including commercial devices), in the building of rail-mounted vehicles for equipments, in mechanical engineering for machine bodys, for housings. In shipbuilding for trunk and superstructures and equipment. For transport container (rolling barrel, large bottles to 10 l, liquid container up to 1 cubic meter in galvanized steel rack). For packing (doses, dose cover, valve disk for aerosol doses and bottle caps), for furniture (incl. camping furniture) and for joining elements (solid rivets, blind rivets, riveting nuts and screws) as well as for flexible pipes.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por WIAM,AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Suppliers with similar grades

ALUDIUM

FABRICANTE

Information and services

Quantity:

One truck load – Specialty products on request.

Additional services:

Via Cindal (the Aludium R&D department): R&D services, benchmarking, chemical audits, material specification, process optimisation, quality monitoring, sample analysis, prototyping, training

SALOMON'S METALEN

DISTRIBUIDOR

BIKAR-METALLE GMBH

FABRICANTE Y DISTRIBUIDOR

Information and services

Additional services:

Cuttings, Parts from drawings

There are 4 other suppliers for this grade.

Preview all suppliers

Lectura sugerida

6061-T6 Aluminium – The Ultimate Guide

7075-T6 Aluminium: Overview & Properties

Aircraft Aluminium Grades

Cast vs. Wrought Aluminium: Standards, Properties and Applications

Precipitation Hardening (Age Hardening)

Mostrar todo

Do you supply similar materials?

List your company on Matmatch now and reach engineers around the world looking for such materials.

Request more information

Propiedades

General

Property	Temperature	Value	Condition	Related Standards	Shape
Densidad		2.66 g/cm³ Show Material materials with Densidad of 2.66 g/cm³	F	EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755
	20.0 °C	2.66 g/cm³ Show Material materials with Densidad of 2.66 g/cm³	F	DIN 1725-1, EN 573-3, EN 573-4	Forging, Profile, Rod, Sheet, Strip, Tube

Mecánica

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coeficiente de Poisson		0.33 [-] Show Material materials with Coeficiente de Poisson of 0.33 [-]				Typical for Wrought 5000 Series Aluminium
Dureza Brinell		58.0 [-] Show Material materials with Dureza Brinell of 58.0 [-]	F	EN 573-3, EN 570
	20.0 °C	45.0 [-] Show Material materials with Dureza Brinell of 45.0 [-]	F	DIN 1725-1, EN 573-3, EN 573-4	Forging, Profile, Rod, Tube
	20.0 °C	50.0 [-] Show Material materials with Dureza Brinell of 50.0 [-]	F	DIN 1725-1, EN 573-3, EN 573-4	Sheet
	20.0 °C	60.0 [-] Show Material materials with Dureza Brinell of 60.0 [-]	F	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
Elongación		12.0 % Show Material materials with Elongación of 12.0 %	F	EN 573-3, EN 755		A50
		14.0 % Show Material materials with Elongación of 14.0 %	F	EN 573-3, EN 755		A100
	20.0 °C	10.0 % Show Material materials with Elongación of 10.0 %	F	DIN 1725-1, EN 573-3, EN 573-4	Sheet
	20.0 °C	12.0 % Show Material materials with Elongación of 12.0 %	F	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip
	20.0 °C	12.0 % Show Material materials with Elongación of 12.0 %	F	DIN 1725-1, EN 573-3, EN 573-4	Profile, Rod, Tube	A10
	20.0 °C	14.0 % Show Material materials with Elongación of 14.0 %	F	DIN 1725-1, EN 573-3, EN 573-4	Forging, Profile, Rod, Tube
	20.0 °C	23.0 % Show Material materials with Elongación of 23.0 %	F	DIN 1725-1, EN 573-3, EN 573-4
	60.0 °C	22.0 % Show Material materials with Elongación of 22.0 %	F	DIN 1725-1, EN 573-3, EN 573-4
	100.0 °C	21.0 % Show Material materials with Elongación of 21.0 %	F	DIN 1725-1, EN 573-3, EN 573-4
	140.0 °C	38.0 % Show Material materials with Elongación of 38.0 %	F	DIN 1725-1, EN 573-3, EN 573-4
	180.0 °C	38.0 % Show Material materials with Elongación of 38.0 %	F	DIN 1725-1, EN 573-3, EN 573-4
	240.0 °C	47.0 % Show Material materials with Elongación of 47.0 %	F	DIN 1725-1, EN 573-3, EN 573-4
	300.0 °C	66.0 % Show Material materials with Elongación of 66.0 %	F	DIN 1725-1, EN 573-3, EN 573-4
	360.0 °C	102.0 % Show Material materials with Elongación of 102.0 %	F	DIN 1725-1, EN 573-3, EN 573-4
Módulo de cizallamiento		26.5 GPa Show Material materials with Módulo de cizallamiento of 26.5 GPa	F	EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755
	20.0 °C	27.0 GPa Show Material materials with Módulo de cizallamiento of 27.0 GPa	F	DIN 1725-1, EN 573-3, EN 573-4	Forging, Profile, Rod, Sheet, Strip, Tube
Módulo elástico		70.5 GPa Show Material materials with Módulo elástico of 70.5 GPa	F	EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755
	20.0 °C	68.0 - 72.0 GPa Show Material materials with Módulo elástico of 68.0 - 72.0 GPa	F	DIN 1725-1, EN 573-3, EN 573-4	Forging, Profile, Rod, Sheet, Strip, Tube
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Resistencia a la tracción		180.0 MPa Show Material materials with Resistencia a la tracción of 180.0 MPa	F	EN 573-3, EN 485, EN 755
		190.0 - 250.0 MPa Show Material materials with Resistencia a la tracción of 190.0 - 250.0 MPa	F	EN 573-3, EN 1715-3, EN 1715-4
		190.0 MPa Show Material materials with Resistencia a la tracción of 190.0 MPa	F	EN 573-3, EN 485
	20.0 °C	180.0 MPa Show Material materials with Resistencia a la tracción of 180.0 MPa	F	DIN 1725-1, EN 573-3, EN 573-4	Forging, Profile, Rod, Tube
	20.0 °C	190.0 MPa Show Material materials with Resistencia a la tracción of 190.0 MPa	F	DIN 1725-1, EN 573-3, EN 573-4	Sheet
	20.0 °C	200.0 MPa Show Material materials with Resistencia a la tracción of 200.0 MPa	F	DIN 1725-1, EN 573-3, EN 573-4	Sheet
	20.0 °C	210.0 MPa Show Material materials with Resistencia a la tracción of 210.0 MPa	F	DIN 1725-1, EN 573-3, EN 573-4	Sheet, Strip

Aplicaciones térmicas

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Calor específico	20.0 °C	963.0 J/(kg·K) Show Material materials with Calor específico of 963.0 J/(kg·K)	F	DIN 1725-1, EN 573-3, EN 573-4	Forging, Profile, Rod, Sheet, Strip, Tube
Coeficiente de dilatación térmica	20 °C	2.3899999999999998e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.3899999999999998e-05 1/K	F	EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755
	100 °C	2.3899999999999998e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.3899999999999998e-05 1/K	F	EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755
	100.0 °C	2.39e-05 1/K Show Material materials with Coeficiente de dilatación térmica of 2.39e-05 1/K	F	DIN 1725-1, EN 573-3, EN 573-4	Forging, Profile, Rod, Sheet, Strip, Tube
Conductividad térmica	20.0 °C	140.0 - 160.0 W/(m·K) Show Material materials with Conductividad térmica of 140.0 - 160.0 W/(m·K)	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755	Forging, Profile, Rod, Sheet, Strip, Tube
Temperatura de fusión		610.0 - 640.0 °C Show Material materials with Temperatura de fusión of 610.0 - 640.0 °C	F	EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755
Temperatura máx. de funcionamiento		150.0 °C Show Material materials with Temperatura máx. de funcionamiento of 150.0 °C				Typical for Wrought 5000 Series Aluminium

Eléctrico

Property	Temperature	Value	Condition	Related Standards	Shape
Conductividad eléctrica	20.0 °C	20000000.0 - 23000000.0 S/m Show Material materials with Conductividad eléctrica of 20000000.0 - 23000000.0 S/m	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755	Forging, Profile, Rod, Sheet, Strip, Tube
Resistividad eléctrica		4.35e-08 - 5e-08 Ω·m Show Material materials with Resistividad eléctrica of 4.35e-08 - 5e-08 Ω·m	F	EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755

Chemical properties

Property	Value	Condition	Related Standards	Shape
Cobre	0.1 % Show Material materials with Cobre of 0.1 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755	Forging, Profile, Rod, Sheet, Strip, Tube
Cromo	0.3 Show Material materials with Cromo of 0.3	F	DIN 1725-1, EN 573-3, EN 573-4	Forging, Profile, Rod, Sheet, Strip, Tube
Hierro	0.4 % Show Material materials with Hierro of 0.4 %	F	DIN 1725-1, EN 573-3, EN 573-4	Forging, Profile, Rod, Sheet, Strip, Tube
	0.40 % Show Material materials with Hierro of 0.40 %	F	EN 573-3, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755
Magnesio	2.6 - 3.6 % Show Material materials with Magnesio of 2.6 - 3.6 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755	Forging, Profile, Rod, Sheet, Strip, Tube
Manganeso	0.5 % Show Material materials with Manganeso of 0.5 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755	Forging, Profile, Rod, Sheet, Strip, Tube
Silicona	0.4 % Show Material materials with Silicona of 0.4 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755	Forging, Profile, Rod, Sheet, Strip, Tube
Titanio	0.15 % Show Material materials with Titanio of 0.15 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755	Forging, Profile, Rod, Sheet, Strip, Tube
Zinc	0.2 % Show Material materials with Zinc of 0.2 %	F	DIN 1725-1, EN 573-3, EN 573-4, EN 1386, EN 1715-3, EN 1715-4, EN 485, EN 570, EN 755	Forging, Profile, Rod, Sheet, Strip, Tube

Technological properties

Property
Anodizing	decorative: gut (EQ: sehr gut), Protective: very good
Brazing	hard brazing (with flux/ without flux): poor / sufficient, friction soldering: acceptable, soft brazing with flux: poor
Corrosion properties	Seawater: very good to good, weathering: very good
Workability	Bending / Spinning (cold): good / acceptable, Impact extrusion (cold): sufficient, Deep drawing / upsetting (Condition) good (O) / good (H12)

Looking for suppliers of this material? Click to see 7 supplier of DIN 1725-1 Grade 3.3535 F on Matmatch