EN 573-3 Grade 3.4365 T651

View suppliers (6)
Want to keep this datasheet? Save it now in your required format

Description

DIN 3.4365 is a high-strength alloy that offers good stress-corrosion cracking resistance. Known as a mainstay in the aerospace industry since it was introduced, Aluminum 7075 brings moderate toughness as well as an excellent strength-to-weight ratio. It is also important to note that at sub-zero temperatures Aluminum 7075 increases in strength.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueConditionRelated Standards

Densidad

2.8 g/cm³

Show Material materials with Densidad of 2.8 g/cm³

T651

EN 573-3, EN 485, EN 754

Mecánica

PropertyValueConditionRelated StandardsComment

Coeficiente de Poisson

0.33 [-]

Show Material materials with Coeficiente de Poisson of 0.33 [-]

Typical for Wrought 7000 Series Aluminium

Dureza Brinell

104.0 [-]

Show Material materials with Dureza Brinell of 104.0 [-]

T651

EN 573-3, EN 485

119.0 [-]

Show Material materials with Dureza Brinell of 119.0 [-]

T651

EN 573-3, EN 485

135.0 [-]

Show Material materials with Dureza Brinell of 135.0 [-]

T651

EN 573-3, EN 485

144.0 [-]

Show Material materials with Dureza Brinell of 144.0 [-]

T651

EN 573-3, EN 485

147.0 [-]

Show Material materials with Dureza Brinell of 147.0 [-]

T651

EN 573-3, EN 485

155.0 [-]

Show Material materials with Dureza Brinell of 155.0 [-]

T651

EN 573-3, EN 485

157.0 [-]

Show Material materials with Dureza Brinell of 157.0 [-]

T651

EN 573-3, EN 485

158.0 [-]

Show Material materials with Dureza Brinell of 158.0 [-]

T651

EN 573-3, EN 485

160.0 [-]

Show Material materials with Dureza Brinell of 160.0 [-]

T651

EN 573-3, EN 485

161.0 [-]

Show Material materials with Dureza Brinell of 161.0 [-]

T651

EN 573-3, EN 485

163.0 [-]

Show Material materials with Dureza Brinell of 163.0 [-]

T651

EN 573-3, EN 485

Módulo de cizallamiento

27.1 GPa

Show Material materials with Módulo de cizallamiento of 27.1 GPa

T651

EN 573-3, EN 485, EN 754

Módulo elástico

72.0 GPa

Show Material materials with Módulo elástico of 72.0 GPa

T651

EN 573-3, EN 485, EN 754

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 7000 Series Aluminium

Resistencia a la tracción

360.0 MPa

Show Material materials with Resistencia a la tracción of 360.0 MPa

T651

EN 573-3, EN 485

410.0 MPa

Show Material materials with Resistencia a la tracción of 410.0 MPa

T651

EN 573-3, EN 485

460.0 MPa

Show Material materials with Resistencia a la tracción of 460.0 MPa

T651

EN 573-3, EN 485

490.0 MPa

Show Material materials with Resistencia a la tracción of 490.0 MPa

T651

EN 573-3, EN 485

495.0 MPa

Show Material materials with Resistencia a la tracción of 495.0 MPa

T651

EN 573-3, EN 485

525.0 MPa

Show Material materials with Resistencia a la tracción of 525.0 MPa

T651

EN 573-3, EN 485

530.0 MPa

Show Material materials with Resistencia a la tracción of 530.0 MPa

T651

EN 573-3, EN 485

540.0 MPa

Show Material materials with Resistencia a la tracción of 540.0 MPa

T651

EN 573-3, EN 485, EN 754

545.0 MPa

Show Material materials with Resistencia a la tracción of 545.0 MPa

T651

EN 573-3, EN 485

Ángulo de flexión a 90°

4.5 °/t

Show Material materials with Ángulo de flexión a 90° of 4.5 °/t

T651

EN 573-3, EN 485

5.5 °/t

Show Material materials with Ángulo de flexión a 90° of 5.5 °/t

T651

EN 573-3, EN 485

6.5 °/t

Show Material materials with Ángulo de flexión a 90° of 6.5 °/t

T651

EN 573-3, EN 485

8.0 °/t

Show Material materials with Ángulo de flexión a 90° of 8.0 °/t

T651

EN 573-3, EN 485

12.0 °/t

Show Material materials with Ángulo de flexión a 90° of 12.0 °/t

T651

EN 573-3, EN 485

Aplicaciones térmicas

PropertyTemperatureValueConditionRelated Standards

Calor específico

862.0 J/(kg·K)

Show Material materials with Calor específico of 862.0 J/(kg·K)

T651

EN 573-3, EN 485, EN 754

Coeficiente de dilatación térmica

-50 °C

2.16e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.16e-05 1/K

T651

EN 573-3, EN 485, EN 754

20 °C

2.16e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.16e-05 1/K

T651

EN 573-3, EN 485, EN 754

20 °C

2.3399999999999996e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.3399999999999996e-05 1/K

T651

EN 573-3, EN 485, EN 754

20 °C

2.43e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.43e-05 1/K

T651

EN 573-3, EN 485, EN 754

20 °C

2.52e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.52e-05 1/K

T651

EN 573-3, EN 485, EN 754

100 °C

2.3399999999999996e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.3399999999999996e-05 1/K

T651

EN 573-3, EN 485, EN 754

200 °C

2.43e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.43e-05 1/K

T651

EN 573-3, EN 485, EN 754

300 °C

2.52e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.52e-05 1/K

T651

EN 573-3, EN 485, EN 754

Conductividad térmica

130.0 - 160.0 W/(m·K)

Show Material materials with Conductividad térmica of 130.0 - 160.0 W/(m·K)

T651

EN 573-3, EN 485, EN 754

Temperatura de fusión

480.0 - 640.0 °C

Show Material materials with Temperatura de fusión of 480.0 - 640.0 °C

T651

EN 573-3, EN 485, EN 754

Eléctrico

PropertyValueConditionRelated Standards

Conductividad eléctrica

19000000.0 - 23000000.0 S/m

Show Material materials with Conductividad eléctrica of 19000000.0 - 23000000.0 S/m

T651

EN 573-3, EN 485, EN 754

Resistividad eléctrica

4.35e-08 - 5.26e-08 Ω·m

Show Material materials with Resistividad eléctrica of 4.35e-08 - 5.26e-08 Ω·m

T651

EN 573-3, EN 485, EN 754

Chemical properties

PropertyValueConditionRelated Standards

Cobre

1.2 - 2.0 %

Show Material materials with Cobre of 1.2 - 2.0 %

T651

EN 573-3, EN 485, EN 754

Cromo

0.18 - 0.28 %

Show Material materials with Cromo of 0.18 - 0.28 %

T651

EN 573-3, EN 485, EN 754

Hierro

0.50 %

Show Material materials with Hierro of 0.50 %

T651

EN 573-3, EN 485, EN 754

Magnesio

2.1 - 2.9 %

Show Material materials with Magnesio of 2.1 - 2.9 %

T651

EN 573-3, EN 485, EN 754

Manganeso

0.3 %

Show Material materials with Manganeso of 0.3 %

T651

EN 573-3, EN 485, EN 754

Silicona

0.4 %

Show Material materials with Silicona of 0.4 %

T651

EN 573-3, EN 485, EN 754

Titanio

0.2 %

Show Material materials with Titanio of 0.2 %

T651

EN 573-3, EN 485, EN 754

Zinc

5.1 - 6.1 %

Show Material materials with Zinc of 5.1 - 6.1 %

T651

EN 573-3, EN 485, EN 754

Technological properties

Property
Anodizing

decorative: not suitable, Protective: acceptable

Brazing

hard brazing (with flux/ without flux): not suitable / not suitable, friction soldering: not suitable, soft brazing with flux: not suitable

Corrosion properties

Seawater: sufficient to poor, weathering: sufficient to poor

Workability

Bending / Spinning (cold): sufficient (O) / not suitable, Impact extrusion (cold): not suitable, Deep drawing / upsetting (Condition) not suitable / not suitable