EN 573-3 Grade 3.4365 T73510

View suppliers (6)
Want to keep this datasheet? Save it now in your required format

Description

DIN 3.4365 is a high-strength alloy that offers good stress-corrosion cracking resistance. Known as a mainstay in the aerospace industry since it was introduced, Aluminum 7075 brings moderate toughness as well as an excellent strength-to-weight ratio. It is also important to note that at sub-zero temperatures Aluminum 7075 increases in strength.

Related Standards

Equivalent Materials

Los datos sobre este material han sido proporcionados por AluKey.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueConditionRelated Standards

Densidad

2.8 g/cm³

Show Material materials with Densidad of 2.8 g/cm³

T73510

EN 573-3, EN 754, EN 755

Mecánica

PropertyValueConditionRelated StandardsComment

Coeficiente de Poisson

0.33 [-]

Show Material materials with Coeficiente de Poisson of 0.33 [-]

Typical for Wrought 7000 Series Aluminium

Módulo de cizallamiento

27.1 GPa

Show Material materials with Módulo de cizallamiento of 27.1 GPa

T73510

EN 573-3, EN 754, EN 755

Módulo elástico

72.0 GPa

Show Material materials with Módulo elástico of 72.0 GPa

T73510

EN 573-3, EN 754, EN 755

Plane-Strain Fracture Toughnes

22.0 - 35.0 MPa·√m

Show Material materials with Plane-Strain Fracture Toughnes of 22.0 - 35.0 MPa·√m

Typical for Wrought 7000 Series Aluminium

Resistencia a la tracción

440.0 MPa

Show Material materials with Resistencia a la tracción of 440.0 MPa

T73510

EN 573-3, EN 755

455.0 MPa

Show Material materials with Resistencia a la tracción of 455.0 MPa

T73510

EN 573-3, EN 754

470.0 MPa

Show Material materials with Resistencia a la tracción of 470.0 MPa

T73510

EN 573-3, EN 755

475.0 MPa

Show Material materials with Resistencia a la tracción of 475.0 MPa

T73510

EN 573-3, EN 755

485.0 MPa

Show Material materials with Resistencia a la tracción of 485.0 MPa

T73510

EN 573-3, EN 755

Aplicaciones térmicas

PropertyTemperatureValueConditionRelated Standards

Calor específico

862.0 J/(kg·K)

Show Material materials with Calor específico of 862.0 J/(kg·K)

T73510

EN 573-3, EN 754, EN 755

Coeficiente de dilatación térmica

-50 °C

2.16e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.16e-05 1/K

T73510

EN 573-3, EN 754, EN 755

20 °C

2.16e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.16e-05 1/K

T73510

EN 573-3, EN 754, EN 755

20 °C

2.3399999999999996e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.3399999999999996e-05 1/K

T73510

EN 573-3, EN 754, EN 755

20 °C

2.43e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.43e-05 1/K

T73510

EN 573-3, EN 754, EN 755

20 °C

2.52e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.52e-05 1/K

T73510

EN 573-3, EN 754, EN 755

100 °C

2.3399999999999996e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.3399999999999996e-05 1/K

T73510

EN 573-3, EN 754, EN 755

200 °C

2.43e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.43e-05 1/K

T73510

EN 573-3, EN 754, EN 755

300 °C

2.52e-05 1/K

Show Material materials with Coeficiente de dilatación térmica of 2.52e-05 1/K

T73510

EN 573-3, EN 754, EN 755

Conductividad térmica

130.0 - 160.0 W/(m·K)

Show Material materials with Conductividad térmica of 130.0 - 160.0 W/(m·K)

T73510

EN 573-3, EN 754, EN 755

Temperatura de fusión

480.0 - 640.0 °C

Show Material materials with Temperatura de fusión of 480.0 - 640.0 °C

T73510

EN 573-3, EN 754, EN 755

Eléctrico

PropertyValueConditionRelated Standards

Conductividad eléctrica

19000000.0 - 23000000.0 S/m

Show Material materials with Conductividad eléctrica of 19000000.0 - 23000000.0 S/m

T73510

EN 573-3, EN 754, EN 755

Resistividad eléctrica

4.35e-08 - 5.26e-08 Ω·m

Show Material materials with Resistividad eléctrica of 4.35e-08 - 5.26e-08 Ω·m

T73510

EN 573-3, EN 754, EN 755

Chemical properties

PropertyValueConditionRelated Standards

Cobre

1.2 - 2.0 %

Show Material materials with Cobre of 1.2 - 2.0 %

T73510

EN 573-3, EN 754, EN 755

Cromo

0.18 - 0.28 %

Show Material materials with Cromo of 0.18 - 0.28 %

T73510

EN 573-3, EN 754, EN 755

Hierro

0.50 %

Show Material materials with Hierro of 0.50 %

T73510

EN 573-3, EN 754, EN 755

Magnesio

2.1 - 2.9 %

Show Material materials with Magnesio of 2.1 - 2.9 %

T73510

EN 573-3, EN 754, EN 755

Manganeso

0.3 %

Show Material materials with Manganeso of 0.3 %

T73510

EN 573-3, EN 754, EN 755

Silicona

0.4 %

Show Material materials with Silicona of 0.4 %

T73510

EN 573-3, EN 754, EN 755

Titanio

0.2 %

Show Material materials with Titanio of 0.2 %

T73510

EN 573-3, EN 754, EN 755

Zinc

5.1 - 6.1 %

Show Material materials with Zinc of 5.1 - 6.1 %

T73510

EN 573-3, EN 754, EN 755

Technological properties

Property
Anodizing

decorative: not suitable, Protective: acceptable

Brazing

hard brazing (with flux/ without flux): not suitable / not suitable, friction soldering: not suitable, soft brazing with flux: not suitable

Corrosion properties

Seawater: sufficient to poor, weathering: sufficient to poor

Workability

Bending / Spinning (cold): sufficient (O) / not suitable, Impact extrusion (cold): not suitable, Deep drawing / upsetting (Condition) not suitable / not suitable