Kepstan® 6010G30

Nombres alternativos y comerciales
PEKK-GF30

Want to keep this datasheet? Save it now in your required format

Description

KEPSTAN® PEKK resin is a high performance thermoplastic material, based on PolyEtherKetoneKetone (PEKK) highly stable chemical backbone. KEPSTAN® is a unique member of the PAEK family that incorporates distinctive structural features that allow for exceptional possibilities in the control of crystallinity. These features include a low Ether/Ketone ratio and a copolymer structure incorporating Terephthalic and Isophthalic moieties.

KEPSTAN® 6010G30 resin is a glass fiber reinforced compound, based on the 6000 series of KEPSTAN® resins. This series represents the pseudo-amorphous products of the KEPSTAN® family, offering the lowest melting point and the slowest crystallization behavior, while keeping Tg close to 160°C. These properties allow for lower processing temperatures and lead to glassy or semi-crystalline structures, depending on processing technologies and cooling conditions.

KEPSTAN® 6010G30 resin is a low flow grade, suitable for extrusion, compression and injection molding.

KEPSTAN® 6010G30 resin is available in pellet form and standard packaging is 10 kg boxes.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Densidad	1.51 g/cm³ Show Supplier Material materials with Densidad of 1.51 g/cm³	dry	ISO 1183
Índice límite de óxigeno	38 % Show Supplier Material materials with Índice límite de óxigeno of 38 %	dry	ISO 4589-1/-2

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Velocidad de flujo del volumen derretido	12 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 12 cm³/10min	dry	ISO 1133	380°C/5kg

Technological properties

Property

Application areas

Connectors,Fittings, Components, and Injection Molded Parts,Chemical Process Industry,Chemical Process Industry - Injection Molding,Connectors E&E

Fillers

30% Glass Fiber

Processing methods

Injection Molding:

Drying temperature and time: 120°C for 6 to 8 hours

Processing temperature: 320 – 360°C

Temperature settings - Injection: Rear 300°C / Center 315°C / Front 320°C / Nozzle 330°C

Mold temperature (below Tg in any case): 80 - 120°C

Temperature settings - Extrusion Zones 1/2/3/4: 290°C/ 320°C/ 330°C/ 320°C Die: 320°C

Kepstan® 6010G30

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades