Kynar Flex® 3120-15

Nombres alternativos y comerciales
PVDF

Want to keep this datasheet? Save it now in your required format

Description

Kynar Flex® resins are fluorinated thermoplastic copolymers.

Kynar Flex® 3120-15 resin has been specifically designed for use in wire and cable constructions which require a 150ºC rating and improve flame and smoke resistance.

Kynar Flex® 3120-15 resin is easily processed and has excellent physical, mechanical, thermal and flame resistant characteristics. Its low viscosity allows easy processing.

Additional Characteristics:

Excellent thermal stability

Excellent abrasion resistance

High Limiting Oxygen Index

Extremely low smoke emission characteristics

Kynar Flex® 3120-15 resin meets the smoke and flame requirements of UL 910.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Condition	Comment
Absorción de agua	0.03 - 0.05 % Show Supplier Material materials with Absorción de agua of 0.03 - 0.05 %	ASTM D570
Coefficient of friction	0.3 [-] Show Supplier Material materials with Coefficient of friction of 0.3 [-]	ASTM D1894		vs Steel, Kinetic
	0.31 [-] Show Supplier Material materials with Coefficient of friction of 0.31 [-]	ASTM D1894		vs Steel, Static
Densidad	1.77 - 1.8 g/cm³ Show Supplier Material materials with Densidad of 1.77 - 1.8 g/cm³	ASTM D792
	1.78 g/cm³ Show Supplier Material materials with Densidad of 1.78 g/cm³	ISO 1183	dry
Índice límite de óxigeno	95 % Show Supplier Material materials with Índice límite de óxigeno of 95 %	ASTM D2863, ISO 4589-1/-2	dry

Mecánica

Property	Value	Testing Standard	Condition	Comment
Dureza Shore D	65 - 70 [-] Show Supplier Material materials with Dureza Shore D of 65 - 70 [-]	ASTM D2240
Elongación	50 % Show Supplier Material materials with Elongación of 50 %	ISO 527-1/-2	dry	min. \| nominal
	300 - 500 % Show Supplier Material materials with Elongación of 300 - 500 %	ASTM D638
Elongation at yield	10 - 20 % Show Supplier Material materials with Elongation at yield of 10 - 20 %	ASTM D638
	15 % Show Supplier Material materials with Elongation at yield of 15 %	ISO 527-1/-2	dry
Impact strength, Charpy notched, ASTM	No Break at 23°C	ASTM D256
Impact strength, Charpy unnotched, ASTM	No Break at 23°C	ASTM D256
Límite elástico	24.1 - 34.5 MPa Show Supplier Material materials with Límite elástico of 24.1 - 34.5 MPa	ASTM D638
	27 MPa Show Supplier Material materials with Límite elástico of 27 MPa	ISO 527-1/-2	dry
Módulo de flexión	0.621 - 0.827 GPa Show Supplier Material materials with Módulo de flexión of 0.621 - 0.827 GPa	ASTM D790
Módulo elástico	0.689 - 1.2 GPa Show Supplier Material materials with Módulo elástico of 0.689 - 1.2 GPa	ASTM D638
	0.7 GPa Show Supplier Material materials with Módulo elástico of 0.7 GPa	ISO 527-1/-2	dry
Resistencia a la compresión	31 - 41.4 MPa Show Supplier Material materials with Resistencia a la compresión of 31 - 41.4 MPa	ASTM D695
Resistencia a la flexión	20.7 - 34.5 MPa Show Supplier Material materials with Resistencia a la flexión of 20.7 - 34.5 MPa	ASTM D790		at 5% strain
Resistencia a la tracción	34.5 - 48.3 MPa Show Supplier Material materials with Resistencia a la tracción of 34.5 - 48.3 MPa	ASTM D638
Resistencia al choque, ensayo Charpy entallado	No Break at 23°C	ISO 179/1eA	dry

Aplicaciones térmicas

Property	Value	Testing Standard	Pressure	Condition	Comment
Calor específico	745 - 958 J/(kg·K) Show Supplier Material materials with Calor específico of 745 - 958 J/(kg·K)	DSC
Coeficiente de dilatación térmica	0.000126 - 0.000185 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 0.000126 - 0.000185 1/K	ASTM D696
Conductividad térmica	0.144 - 0.18 W/(m·K) Show Supplier Material materials with Conductividad térmica of 0.144 - 0.18 W/(m·K)	ASTM D433
Relative temperature index, electrical	150 °C Show Supplier Material materials with Relative temperature index, electrical of 150 °C	UL 746B
Relative temperature index, mechanical strength	150 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 150 °C	UL 746B
Temperatura de flexión bajo carga	43 - 54 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 43 - 54 °C	ASTM D648	2 MPa		248 °F/hr
	48 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 48 °C	ISO 75-1/-2	2 MPa	dry
	54 - 77 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 54 - 77 °C	ASTM D648	0.45 MPa		248 °F/hr
	65 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 65 °C	ISO 75-1/-2	0.45 MPa	dry
Temperatura de fusión	161 - 168 °C Show Supplier Material materials with Temperatura de fusión of 161 - 168 °C	ASTM D3418
	164 °C Show Supplier Material materials with Temperatura de fusión of 164 °C	ISO 11357-1/-3		dry	10°C/min
Temperatura de transición del vidrio	-41.1 - -39.4 °C Show Supplier Material materials with Temperatura de transición del vidrio of -41.1 - -39.4 °C	ASTM D7028
	-40 °C Show Supplier Material materials with Temperatura de transición del vidrio of -40 °C	ISO 11357-1/-2		dry	10°C/min
Thermal decomposition in air	375 °C Show Supplier Material materials with Thermal decomposition in air of 375 °C	TGA			1% wt. loss
Thermal decomposition in nitrogen	410 °C Show Supplier Material materials with Thermal decomposition in nitrogen of 410 °C	TGA			1% wt. loss
Inflamabilidad	At thickness 1.5 mm IEC 60695-11-10: V-0, At thickness 1 IEC 60695-11-10: V-0 and yellow card available

Eléctrico

Property	Value	Frequency	Testing Standard	Condition
Constante dieléctrica	3.2 - 10.2 [-] Show Supplier Material materials with Constante dieléctrica of 3.2 - 10.2 [-]	1KHz	ASTM D150
	6.7 [-] Show Supplier Material materials with Constante dieléctrica of 6.7 [-]	100Hz	IEC 60250	dry
Factor de disipación	1.05e-05 [-] Show Supplier Material materials with Factor de disipación of 1.05e-05 [-]	100Hz	IEC 60250	dry
	0.02 - 0.19 [-] Show Supplier Material materials with Factor de disipación of 0.02 - 0.19 [-]	100KHz	ASTM D150
Rigidez dieléctrica	51.2 - 59.1 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 51.2 - 59.1 kV/mm		ASTM D149
Surface resistivity	5.9e+11 - 6.1e+11 Ω/sq Show Supplier Material materials with Surface resistivity of 5.9e+11 - 6.1e+11 Ω/sq		ASTM D257
Volume resistivity	2e+14 Ω·cm Show Supplier Material materials with Volume resistivity of 2e+14 Ω·cm		IEC 60093	dry

Rheological Properties

Property	Value	Testing Standard	Condition	Comment
Melt viscosity	600 - 1200 Pa·s Show Supplier Material materials with Melt viscosity of 600 - 1200 Pa·s	ASTM D3835
Velocidad de flujo de la masa derretida	4 - 18 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 4 - 18 g/10min	ASTM D1238		230°C/3.8kg
Velocidad de flujo del volumen derretido	4 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 4 cm³/10min	ISO 1133	dry	232°C/3.8kg

Technological properties

Property

Application areas

Automotive Cables,Foamed PVDF Cable Jacketing,Performance Wire,Plenum Cable,Plenum Conduit,PVDF Cable Jacketing,Wire and Cables

Processing methods

Compression Molding:

Molding temperature (°C) ISO 293: 225

Molding time (min) ISO 293: 3

DeMolding temperature (°C) ISO 293: 120

Kynar Flex® 3120-15

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades