Kynar® 1000 HD

Nombres alternativos y comerciales
PVDF

Want to keep this datasheet? Save it now in your required format

Description

Kynar® resins are fluorinated thermoplastic homopolymers.

Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo mechanical properties.

Kynar® 1000 HD resin is a standard grade of granules for compression and transfer molding, for extrusion of thick walled parts: blocks, rods, plaques, tubes.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Condition
Absorción de agua	0.01 - 0.03 % Show Supplier Material materials with Absorción de agua of 0.01 - 0.03 %	ASTM D570
	0.03 % Show Supplier Material materials with Absorción de agua of 0.03 %	Sim. to ISO 62
Densidad	1.77 - 1.79 g/cm³ Show Supplier Material materials with Densidad of 1.77 - 1.79 g/cm³	ASTM D792
	1.77 g/cm³ Show Supplier Material materials with Densidad of 1.77 g/cm³	ISO 1183	dry
Moisture absorption	0.015 % Show Supplier Material materials with Moisture absorption of 0.015 %	Sim. to ISO 62
Índice límite de óxigeno	60 % Show Supplier Material materials with Índice límite de óxigeno of 60 %	ASTM D2863
	83 % Show Supplier Material materials with Índice límite de óxigeno of 83 %	ISO 4589-1/-2	dry

Mecánica

Property	Temperature	Value	Testing Standard	Condition	Comment
Dureza Shore D		76 - 80 [-] Show Supplier Material materials with Dureza Shore D of 76 - 80 [-]	ASTM D2240
Elongación		20 - 100 % Show Supplier Material materials with Elongación of 20 - 100 %	ASTM D638
		50 % Show Supplier Material materials with Elongación of 50 %	ISO 527-1/-2	dry	min. \| nominal
Elongation at yield		9 % Show Supplier Material materials with Elongation at yield of 9 %	ISO 527-1/-2	dry
Límite elástico		44.8 - 55.2 MPa Show Supplier Material materials with Límite elástico of 44.8 - 55.2 MPa	ASTM D638
Módulo de flexión		1.4 - 2.3 GPa Show Supplier Material materials with Módulo de flexión of 1.4 - 2.3 GPa	ASTM D790
Módulo elástico		2 GPa Show Supplier Material materials with Módulo elástico of 2 GPa	ISO 527-1/-2	dry
Resistencia a la compresión		68.9 - 103 MPa Show Supplier Material materials with Resistencia a la compresión of 68.9 - 103 MPa	ASTM D695
Resistencia a la tracción		34.5 - 55.2 MPa Show Supplier Material materials with Resistencia a la tracción of 34.5 - 55.2 MPa	ASTM D638
Resistencia al choque, ensayo Charpy entallado	-30 °C	5 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 5 kJ/m²	ISO 179/1eA	dry
	23 °C	22 kJ/m² Show Supplier Material materials with Resistencia al choque, ensayo Charpy entallado of 22 kJ/m²	ISO 179/1eA	dry
Resistencia al choque, ensayo Charpy no entallado		No Break at 23 and -30°C	ISO 179/1eU	dry

Aplicaciones térmicas

Property	Value	Testing Standard	Condition	Pressure	Comment
Calor específico	745 - 958 J/(kg·K) Show Supplier Material materials with Calor específico of 745 - 958 J/(kg·K)	DSC
Coeficiente de dilatación térmica	0.000119 - 0.000144 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 0.000119 - 0.000144 1/K	ASTM D696
	0.00015 1/K Show Supplier Material materials with Coeficiente de dilatación térmica of 0.00015 1/K	ISO 11359-1/-2	dry
Conductividad térmica	0.17 - 0.19 W/(m·K) Show Supplier Material materials with Conductividad térmica of 0.17 - 0.19 W/(m·K)	ASTM D433
Relative temperature index, electrical	150 °C Show Supplier Material materials with Relative temperature index, electrical of 150 °C	UL 746B
Relative temperature index, mechanical strength	150 °C Show Supplier Material materials with Relative temperature index, mechanical strength of 150 °C	UL 746B
Temperatura de flexión bajo carga	104 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 104 °C	ISO 75-1/-2	dry	2 MPa
	105 - 115 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 105 - 115 °C	ASTM D648		2 MPa	248 °F/hr
	125 - 140 °C Show Supplier Material materials with Temperatura de flexión bajo carga of 125 - 140 °C	ASTM D648		0.45 MPa	248 °F/hr
Temperatura de fusión	169 °C Show Supplier Material materials with Temperatura de fusión of 169 °C	ISO 11357-1/-3	dry		10°C/min
	172 °C Show Supplier Material materials with Temperatura de fusión of 172 °C	ASTM D3418
Temperatura de reblandecimiento Vicat	138 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 138 °C	ISO 306			50°C/h 50N
Temperatura de transición del vidrio	-40 °C Show Supplier Material materials with Temperatura de transición del vidrio of -40 °C	ASTM D7028, ISO 11357-1/-2	dry		10°C/min
Thermal decomposition in air	375 °C Show Supplier Material materials with Thermal decomposition in air of 375 °C	TGA			1% wt. loss
Thermal decomposition in nitrogen	410 °C Show Supplier Material materials with Thermal decomposition in nitrogen of 410 °C	TGA			1% wt. loss
Inflamabilidad	At thickness 1.6 mm IEC 60695-11-10: V-0, At thickness 0.8 mm IEC 60695-11-10: V-0

Eléctrico

Property	Value	Condition	Frequency	Testing Standard
Constante dieléctrica	7 [-] Show Supplier Material materials with Constante dieléctrica of 7 [-]	dry	1MHz	IEC 60250
	10.5 [-] Show Supplier Material materials with Constante dieléctrica of 10.5 [-]	dry	100Hz	IEC 60250
Factor de disipación	0.027 [-] Show Supplier Material materials with Factor de disipación of 0.027 [-]	dry	100Hz	IEC 60250
	0.24 [-] Show Supplier Material materials with Factor de disipación of 0.24 [-]	dry	1MHz	IEC 60250
Rigidez dieléctrica	27 kV/mm Show Supplier Material materials with Rigidez dieléctrica of 27 kV/mm	dry		IEC 60243-1
Surface resistivity	4e+13 Ω/sq Show Supplier Material materials with Surface resistivity of 4e+13 Ω/sq	cond.		IEC 60093
Volume resistivity	2.3e+12 Ω·cm Show Supplier Material materials with Volume resistivity of 2.3e+12 Ω·cm	dry		IEC 60093
	2e+14 Ω·cm Show Supplier Material materials with Volume resistivity of 2e+14 Ω·cm	65% RH		ASTM D257
Índice de seguimiento comparativo	600 V Show Supplier Material materials with Índice de seguimiento comparativo of 600 V	dry		IEC 60112

Óptico

Property	Value	Testing Standard	Comment
Índice de refracción	1 [-] Show Supplier Material materials with Índice de refracción of 1 [-]	ASTM D542	sodium D line

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	2 % Show Supplier Material materials with Contracción of 2 %	dry	ISO 294-4
	2 % Show Supplier Material materials with Contracción of 2 %	dry	ISO 294-4	Transverse
Melt viscosity	1500 - 2000 Pa·s Show Supplier Material materials with Melt viscosity of 1500 - 2000 Pa·s		ASTM D3835
Velocidad de flujo de la masa derretida	1 - 3 g/10min Show Supplier Material materials with Velocidad de flujo de la masa derretida of 1 - 3 g/10min		ASTM D1238	230°C/5kg
Velocidad de flujo del volumen derretido	1.1 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 1.1 cm³/10min	dry	ISO 1133	230°C/5kg

Technological properties

Property
Application areas	Chemical Process Industry,Chemical Process Industry - High Purity Piping,Chemical Process Industry - Injection Molding,Chemical Process Industry - Stock Shapes,Plenum Pipe,Tubing and Hoses

Kynar® 1000 HD

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades