Kynar® MG15

Nombres alternativos y comerciales
PVDF

Want to keep this datasheet? Save it now in your required format

Description

Kynar® resins are fluorinated thermoplastic homopolymers.

Kynar® MG15 resin is a crystalline high viscosity polymer of polyvinylidene difluoride. It is an engineering polymer with an outstanding balance of physical strength and high chemical resistance which make it ideal for micro and ultra-filtration membranes for durable water purification and other applications.

Kynar® MG15 resin is soluble in selected solvents and can be used in solution processing applications. It is especially recommended for hollow fiber and flat sheet membranes.

Kynar® MG15 resin has NSF, FDA, and USP Class VI certifications for use in potable water, food processing, and bio-pharma applications.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Comment
Absorción de agua	0.04 % Show Supplier Material materials with Absorción de agua of 0.04 %	ASTM D570	max.
Densidad	1.77 - 1.79 g/cm³ Show Supplier Material materials with Densidad of 1.77 - 1.79 g/cm³	ASTM D792

Mecánica

Property	Value	Testing Standard
Límite elástico	44.8 - 55.2 MPa Show Supplier Material materials with Límite elástico of 44.8 - 55.2 MPa	ASTM D638
Módulo de flexión	1.4 - 2.3 GPa Show Supplier Material materials with Módulo de flexión of 1.4 - 2.3 GPa	ASTM D790
Módulo elástico	1.4 - 2.3 GPa Show Supplier Material materials with Módulo elástico of 1.4 - 2.3 GPa	ASTM D638

Aplicaciones térmicas

Property	Value	Testing Standard	Condition	Comment
Temperatura de fusión	162 - 172 °C Show Supplier Material materials with Temperatura de fusión of 162 - 172 °C	ASTM D3418
Temperatura de transición del vidrio	-40 °C Show Supplier Material materials with Temperatura de transición del vidrio of -40 °C	ISO 11357-1/-2	dry	10°C/min

Óptico

Property	Value	Testing Standard	Comment
Índice de refracción	1 [-] Show Supplier Material materials with Índice de refracción of 1 [-]	ASTM D542	sodium D line

Rheological Properties

Property	Value	Testing Standard
Melt viscosity	4800 - 5250 Pa·s Show Supplier Material materials with Melt viscosity of 4800 - 5250 Pa·s	ASTM D3835

Technological properties

Property

Application areas

Biopharma Membranes,Water Filtration Membrane

Certifications

Yellow Card - NSF, FDA, and USP Class VI certifications for use in potable water, food processing, and bio-pharma applications.

Kynar® MG15

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades