Orgalloy® EM 067 HSP

Nombres alternativos y comerciales
PA6
Want to keep this datasheet? Save it now in your required format

Description

Orgalloy® EM 067 HSP resin is a flexible polyamide designed to be used for refrigerant barrier layer in air conditioning rubber hose.

Packaging:

This grade is delivered dried in sealed packaging (20kg bags) ready to be processed.

Shelf life:

Two years from the date of delivery. For any use above this limit, please refer to our technical services.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

Propiedades

General

PropertyValueConditionTesting Standard

Densidad

1.14 g/cm³

Show Supplier Material materials with Densidad of 1.14 g/cm³

dry

ISO 1183

Mecánica

PropertyValueConditionTesting StandardComment

Elongación

50 %

Show Supplier Material materials with Elongación of 50 %

cond.

ISO 527-1/-2

min.

Límite elástico

28 MPa

Show Supplier Material materials with Límite elástico of 28 MPa

dry

ISO 527-1/-2

Módulo elástico

0.572 GPa

Show Supplier Material materials with Módulo elástico of 0.572 GPa

cond.

ISO 527-1/-2

Aplicaciones térmicas

PropertyValueConditionTesting StandardComment

Temperatura de fusión

215 °C

Show Supplier Material materials with Temperatura de fusión of 215 °C

dry

ISO 11357-1/-3

10°C/min

Rheological Properties

PropertyValueConditionTesting StandardComment

Velocidad de flujo del volumen derretido

1 cm³/10min

Show Supplier Material materials with Velocidad de flujo del volumen derretido of 1 cm³/10min

dry

ISO 1133

235°C/5kg

Technological properties

Property
Application areas

Fluid Management - Air Conditioning Circuit

Processing methods

Extrusion:

  • Drying time (only necessary for bags opened for more than two hours): 4-16 hours at 80-90°C
  • Extrusion melt temperature (min-recommended-max): 240-260-300°C