Orgalloy® RDG 113

Nombres alternativos y comerciales
PA*

Want to keep this datasheet? Save it now in your required format

Description

Orgalloy® RDG 113 resin is a polyamide designed to be used for refrigerant barrier layer in air conditioning rubber hose.

Packaging:

This grade is delivered dried in sealed packaging (20kg bags) ready to be processed.

Shelf life:

Two years from the date of delivery. For any use above this limit, please refer to our technical services.s.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Densidad	1.12 g/cm³ Show Supplier Material materials with Densidad of 1.12 g/cm³	dry	ISO 1183

Mecánica

Property	Value	Condition	Testing Standard	Comment
Elongación	50 % Show Supplier Material materials with Elongación of 50 %	cond.	ISO 527-1/-2	min. \| nominal
Elongation at yield	4.4 % Show Supplier Material materials with Elongation at yield of 4.4 %	cond.	ISO 527-1/-2
Límite elástico	48 MPa Show Supplier Material materials with Límite elástico of 48 MPa	cond.	ISO 527-1/-2
	80 MPa Show Supplier Material materials with Límite elástico of 80 MPa	dry	ISO 527-1/-2
Módulo elástico	2.3 GPa Show Supplier Material materials with Módulo elástico of 2.3 GPa	cond.	ISO 527-1/-2

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	229 °C Show Supplier Material materials with Temperatura de fusión of 229 °C	dry	ISO 11357-1/-3	10°C/min

Technological properties

Property

Application areas

Fluid Management - Air Conditioning Circuit

Processing methods

Extrusion:

Drying time (only necessary for bags opened for more than two hours): 4-8 hours at 80-90°C

Extrusion melt temperature (min-recommended-max): 240-260-300°C

Orgalloy® RDG 113

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades