Pebax® 3533 SA 01

Nombres alternativos y comerciales
TPA

Want to keep this datasheet? Save it now in your required format

Description

Polyether block amide Pebax® 3533 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Condition
Absorción de agua	1.2 % Show Supplier Material materials with Absorción de agua of 1.2 %	Sim. to ISO 62
Densidad	1 g/cm³ Show Supplier Material materials with Densidad of 1 g/cm³	ISO 1183	dry
Moisture absorption	0.4 % Show Supplier Material materials with Moisture absorption of 0.4 %	Sim. to ISO 62

Mecánica

Property	Value	Testing Standard	Condition	Comment
Dureza Shore A	82 [-] Show Supplier Material materials with Dureza Shore A of 82 [-]	ISO 7619-1		for 3 seconds
Dureza Shore D	25 [-] Show Supplier Material materials with Dureza Shore D of 25 [-]	ISO 7619-1	dry	15 seconds
Elongación	50 % Show Supplier Material materials with Elongación of 50 %	ISO 527-1/-2	cond., dry	min.
Módulo elástico	0.018 GPa Show Supplier Material materials with Módulo elástico of 0.018 GPa	ISO 527-1/-2	cond.
	0.019 GPa Show Supplier Material materials with Módulo elástico of 0.019 GPa	ISO 527-1/-2	dry
Resistencia al choque, ensayo Charpy entallado	No Break at 23 and -30°C	ISO 179/1eA	cond.
Resistencia al choque, ensayo Charpy no entallado	No Break at 23 and -30°C	ISO 179/1eU	cond.

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	144 °C Show Supplier Material materials with Temperatura de fusión of 144 °C	dry	ISO 11357-1/-3	10°C/min
Temperatura de reblandecimiento Vicat	77 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 77 °C		ISO 306	50°C/h 50N

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	0.5 % Show Supplier Material materials with Contracción of 0.5 %	dry	ISO 294-4
	0.8 % Show Supplier Material materials with Contracción of 0.8 %	dry	ISO 294-4	Transverse

Technological properties

Property

Application areas

Nylon Film Modification,Permanent Antistatic Solutions,Accessories

Certifications

Food Contact

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommended / Max) : 180°C / 210°C / 240°C.

Typical mold temperature : 10 – 30°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 55-65°C.

Extrusion:

Typical melt temperature (Min / Recommended / Max) : 190°C / 205°C / 220°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 55-65°C.

Pebax® 3533 SA 01

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades