Pebax® 6333 SA 01 MED

Nombres alternativos y comerciales
TPA

Want to keep this datasheet? Save it now in your required format

Description

Polyether block amide Pebax® 6333 SA 01 MED resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet the stringent requirements of the medical applications such as minimally invasive devices.

Pebax® 6333 SA 01 MED resin also offers an excellent combination of properties such as: kink resistance, low friction coefficient and superior dynamic response. Upon request, letters regarding USP Class VI compliance can be provided.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Condition
Absorción de agua	1.1 % Show Supplier Material materials with Absorción de agua of 1.1 %	Sim. to ISO 62
Densidad	1.01 g/cm³ Show Supplier Material materials with Densidad of 1.01 g/cm³	ISO 1183	dry
Moisture absorption	0.7 % Show Supplier Material materials with Moisture absorption of 0.7 %	Sim. to ISO 62

Mecánica

Property	Value	Condition	Testing Standard	Comment
Dureza Shore D	58 [-] Show Supplier Material materials with Dureza Shore D of 58 [-]	dry	ISO 7619-1	15 seconds
Elongación	50 % Show Supplier Material materials with Elongación of 50 %	cond., dry	ISO 527-1/-2	min. \| nominal
Elongation at yield	22 % Show Supplier Material materials with Elongation at yield of 22 %	cond., dry	ISO 527-1/-2
Límite elástico	18 MPa Show Supplier Material materials with Límite elástico of 18 MPa	cond.	ISO 527-1/-2
	23 MPa Show Supplier Material materials with Límite elástico of 23 MPa	dry	ISO 527-1/-2
Módulo elástico	0.285 GPa Show Supplier Material materials with Módulo elástico of 0.285 GPa	cond.	ISO 527-1/-2
	0.307 GPa Show Supplier Material materials with Módulo elástico of 0.307 GPa	dry	ISO 527-1/-2
Resistencia al choque, ensayo Charpy no entallado	No Break at 23 and -30°C	cond.	ISO 179/1eU

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	169 °C Show Supplier Material materials with Temperatura de fusión of 169 °C	dry	ISO 11357-1/-3	10°C/min
Temperatura de reblandecimiento Vicat	157 °C Show Supplier Material materials with Temperatura de reblandecimiento Vicat of 157 °C		ISO 306	50°C/h 50N

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Contracción	1.2 % Show Supplier Material materials with Contracción of 1.2 %	dry	ISO 294-4
	1.4 % Show Supplier Material materials with Contracción of 1.4 %	dry	ISO 294-4	Transverse

Technological properties

Property

Application areas

Healthcare-Other,IV Bags,Medical Catheters

Certifications

USP Class VI

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommended / Max) : 230°C / 260°C / 290°C.

Typical mold temperature : 25 – 60°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.

Extrusion:

Typical melt temperature (Min / Recommended / Max) : 210°C / 225°C / 240°C.

Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.

Pebax® 6333 SA 01 MED

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades