Pebax® MH 2030

Nombres alternativos y comerciales
TPA

Want to keep this datasheet? Save it now in your required format

Description

Polyether block amide Pebax® MH 2030 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.

Pebax® MH 2030 resin is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity of the final part. Refractive index according to an internal method is 1.508.

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

See where falls on the material property chart for against in your materials selection and design process. Our Ashby charts are interactive with more technical data upon clicking. Sign up to get access to this premium feature for free.

All categories

Propiedades

General

Property	Value	Testing Standard	Condition
Absorción de agua	120 % Show Supplier Material materials with Absorción de agua of 120 %	Sim. to ISO 62
Densidad	1.14 g/cm³ Show Supplier Material materials with Densidad of 1.14 g/cm³	ISO 1183	dry
Moisture absorption	4.5 % Show Supplier Material materials with Moisture absorption of 4.5 %	Sim. to ISO 62

Mecánica

Property	Value	Condition	Testing Standard	Comment
Dureza Shore D	40 [-] Show Supplier Material materials with Dureza Shore D of 40 [-]	dry	ISO 7619-1	15 seconds
Módulo elástico	0.08 GPa Show Supplier Material materials with Módulo elástico of 0.08 GPa	cond.	ISO 527-1/-2

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	200 °C Show Supplier Material materials with Temperatura de fusión of 200 °C	dry	ISO 11357-1/-3	10°C/min

Eléctrico

Property	Value	Condition	Testing Standard
Surface resistivity	1e+07 Ω/sq Show Supplier Material materials with Surface resistivity of 1e+07 Ω/sq	cond.	IEC 60093
Volume resistivity	100000 Ω·cm Show Supplier Material materials with Volume resistivity of 100000 Ω·cm	cond.	IEC 60093

Technological properties

Property

Application areas

Permanent Antistatic Solutions,Permanent Antistatic Solutions E&E

Processing methods

Injection Molding:

Typical melt temperature (Min / Recommended / Max): 230°C / 240°C / 260°C.

Typical mold temperature: 25–60°C.

Drying time and temperature (only necessary for bags opened for more than two hours): 5-7 hours at 70-90°C.

Extrusion:

Typical melt temperature (Min / Recommended / Max): 230°C / 250°C / 280°C

Drying time and temperature (only necessary for bags opened for more than two hours): 5-7 hours at 70-90°C

Pebax® MH 2030

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades