Platamid® HX 2592

Nombres alternativos y comerciales
PA*

Want to keep this datasheet? Save it now in your required format

Description

Copolyamide Hot Melt Adhesive / Extrusion Applications

Platamid® HX 2592 is a specialty thermoplastic co-polyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion.

Platamid® HX 2592 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, and more). In addition,

Platamid® HX 2592

also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU etc. Dense layers of Platamid® HX 2592

are known to have barrier properties against PVC plasticizer migration.

Platamid® HX 2592 is also characterized by a very high content of Bio based Carbon (80%), making it a bio based solution to difficult-to-solve bonding problems.

This product is available:

Dried (HX 2592 T)

Un-dried (HX 2592 F)

PACKAGING

Platamid HX 2592 F is delivered in 25 kg sealed bags and in 500 kg Big Bag. Platamid HX 2592 T is delivered in 25 kg sealed bagsThese grades are ready to be processed.

SHELF LIFE

Two years from the date of delivery. For any use above this limit, please refer to our technical services.

RENEWABLE CARBON CONTENT 80 % (calculated, ASTM D6866)

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Bio-based content	80 % Show Supplier Material materials with Bio-based content of 80 %
Densidad	1.09 g/cm³ Show Supplier Material materials with Densidad of 1.09 g/cm³	dry	ISO 1183

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	106 °C Show Supplier Material materials with Temperatura de fusión of 106 °C	dry	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Velocidad de flujo del volumen derretido	24 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 24 cm³/10min	dry	ISO 1133	160°C/2.16kg

Technological properties

Property
Application areas	Hot Melt Hot Melt Adhesives Automotive Interior - Automotive Interior

Platamid® HX 2592

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades