Platamid® M 1276

Nombres alternativos y comerciales
PA*

Want to keep this datasheet? Save it now in your required format

Description

Copolyamide Hot Melt Adhesive / Extrusion Applications

Platamid® M 1276 is a thermoplastic co-polyamide hot melt adhesive available in pellet form. This medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion.

Platamid® M 1276 offers a very good adhesion to various polar substrates (thermoplastics, thermosets, metal natural fibers, etc). In addition, Platamid® M 1276

also exhibits strong adhesion onto rigid and plasticized PVC as well as ABS, epoxy resin, PU etc. Dense layers of

Platamid® M 1276 are known to have barrier properties against PVC plasticizer migration.

This product is available:

Dried (M 1276 TE)

Un-dried (M 1276 F)

PACKAGING

Platamid® M 1276 TE is delivered in 25 kg sealed bags. Platamid®M 1276 F is delivered in 25 kg sealed bags and 500 kg sealed big bags (GRVS). These grades are ready to be processed.

SHELF LIFE

Two years from the date of delivery. For any use above this limit, please refer to our technical services.

RENEWABLE CARBON: 26%

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Bio-based content	26 % Show Supplier Material materials with Bio-based content of 26 %
Densidad	1.1 g/cm³ Show Supplier Material materials with Densidad of 1.1 g/cm³	dry	ISO 1183

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	110 °C Show Supplier Material materials with Temperatura de fusión of 110 °C	dry	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Velocidad de flujo del volumen derretido	6 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 6 cm³/10min	dry	ISO 1133	160°C/2.16kg

Technological properties

Property
Application areas	Decorative Films,Hot Melt Hot Melt Adhesives Automotive Interior - Automotive Interior,Hot Melt Hot Melt Adhesives Flooring - Flooring,Hot Melt Hot Melt Adhesives Interlining / Garments - Interlining / Garments,Circuit Board Adhesives

Platamid® M 1276

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades