Platamid® M 2468

Nombres alternativos y comerciales
PA*

Want to keep this datasheet? Save it now in your required format

Description

Platamid® M 2468 Copolyamide Hot Melt Adhesive / Extrusion Applications

Platamid® M 2468 is a standard thermoplastic copolyamide hot melt adhesive available in pellet form. This low to medium melt viscosity grade is particularly suitable for manufacturing webs, nets, mono- and multi-filaments, and films by extrusion.

Platamid® M 2468 offers a good adhesion at low fusing conditions to various polar substrates (thermoplastics, thermosets, metal, natural fibers, etc).

Platamid® M 2468 has good dry cleaning resistance and washing resistance up to 60°C.

This product is available:

Dried with optical brightener (M 2468 TA)

Un-dried with optical brightener (M 2468 FA)

PACKAGING

Platamid®M 2468 TA is delivered in 25 kg sealed bags and 500kg sealed big bags (GRVS). Platamid® M 2468 FA is delivered in 500kg sealed rigid containers (GRVC) and 500kg sealed big bags (GRVS). These grades are ready to be processed.

SHELF LIFE

Two years from the date of delivery. For any use above this limit, please refer to our technical services.

RENEWABLE CARBON CONTENT 25%

(calculated, ASTM D6866)

Los datos sobre este material han sido proporcionados por Arkema Technical Polymers.

A menos que se indique lo contrario, todas las medidas corresponden a condiciones de temperatura ambiente. A menos que se indique lo contrario, se utilizan las unidades del SI.
Las normas armonizadas son similares a uno o varios estándares del proveedor. Es posible que algunas normas armonizadas se ajusten al estándar original, mientras que otras pueden quedar fuera de su alcance.

Ashby charts

All categories

Propiedades

General

Property	Value	Condition	Testing Standard
Bio-based content	25 % Show Supplier Material materials with Bio-based content of 25 %
Densidad	1.06 g/cm³ Show Supplier Material materials with Densidad of 1.06 g/cm³	dry	ISO 1183

Mecánica

Property	Value	Condition	Testing Standard
Límite elástico	38 MPa Show Supplier Material materials with Límite elástico of 38 MPa	cond.	ISO 527-1/-2

Aplicaciones térmicas

Property	Value	Condition	Testing Standard	Comment
Temperatura de fusión	102 °C Show Supplier Material materials with Temperatura de fusión of 102 °C	dry	ISO 11357-1/-3	10°C/min

Rheological Properties

Property	Value	Condition	Testing Standard	Comment
Velocidad de flujo del volumen derretido	26 cm³/10min Show Supplier Material materials with Velocidad de flujo del volumen derretido of 26 cm³/10min	dry	ISO 1133	160°C/2.16kg

Technological properties

Property
Application areas	Hot Melt Hot Melt Adhesives Automotive Interior - Automotive Interior

Platamid® M 2468

Description

Ashby charts

Usos

Materiales de este proveedor

Propiedades